Diamond Core Bit

DIAMOND CORE BIT 5MM FOR HARD TILES AND PORCELAIN

Ø5mm Diamond core bit Application: The diamond core bit is used to drill holes in: Ceramic tiles Marble Grade 5 porcelain (hardest) Granite Glass Slate...

R 293.83

{"id":9887174470,"title":"DIAMOND CORE BIT 5MM FOR HARD TILES AND PORCELAIN","handle":"diamond-core-bit-5mm-for-hard-tiles-and-porcelain","description":"\u003c!-- Product header --\u003e\r\n\u003cdiv id=\"tc-desc-header\"\u003e\r\n\t\u003cspan class=\"description-headingBox\"\u003eØ5mm Diamond core bit\u003c\/span\u003e\n\u003c\/div\u003e\r\n\u003ch4\u003e\r\n\u003cimg alt=\"\" height=\"175\" src=\"http:\/\/www.vermontsales.co.za\/images\/torkcraft\/drillbits\/diamond\/dcb_sm1.jpg\" style=\"float: right\" width=\"275\"\u003eApplication:\u003c\/h4\u003e\r\n\u003cp\u003eThe diamond core bit is used to drill holes in:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\t\u003cli\u003eCeramic tiles\u003c\/li\u003e\r\n\t\u003cli\u003eMarble\u003c\/li\u003e\r\n\t\u003cli\u003eGrade 5 porcelain (hardest)\u003c\/li\u003e\r\n\t\u003cli\u003eGranite\u003c\/li\u003e\r\n\t\u003cli\u003eGlass\u003c\/li\u003e\r\n\t\u003cli\u003eSlate\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003eThe diamond core cuts faster, smoother and lasts longer than any other core \r\ndrills.\u003c\/p\u003e\r\n\u003ch4\u003eHow to use the diamond core bit:\u003c\/h4\u003e\r\n\u003cp\u003eThe diamond core drill bit must be used with water at all times when \r\ndrilling. The water serves as a coolant to prevent the diamonds from \r\noverheating. The maximum allowable temperature for a diamond core bit is 500°C.\u003c\/p\u003e\r\n\u003cp\u003eThere is no pilot drill with the diamond core bit. A low rpm rotary drill \r\nwith a planetary gearbox is required to be used with a diamond core bit. It is \r\npossible to use a cordless drill, but in the lowest gear setting. No hammer \r\naction is used.\u003c\/p\u003e\r\n\u003col\u003e\r\n\t\u003cli\u003eTightly fasten the diamond core bit in the drill's chuck.\u003c\/li\u003e\r\n\t\u003cli\u003eKeep the bit steady at a 45?ø angle \r\n\twith the starting point on the edge of the assigned area to be \r\n\tdrilled whilst the bit is rotating.\u003c\/li\u003e\r\n\t\u003cli\u003eA notch will be made (this is normal). \r\n\tGradually move the drill from 45° to 90° and continue drilling until \r\n\tfinished.\u003c\/li\u003e\r\n\t\u003cli\u003eAllow the diamond core bit to cool down completely before proceeding to \r\n\tdrill another hole.\u003c\/li\u003e\r\n\u003c\/ol\u003e\r\n\u003cp\u003eWater can be applied by:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\t\u003cli\u003espraying water on the surface,\u003c\/li\u003e\r\n\t\u003cli\u003eusing a wet sponge,\u003c\/li\u003e\r\n\t\u003cli\u003eattaching a water feed device. This is necessary when drilling into a \r\n\twall tile.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp class=\"info-products\"\u003ePlease have a look at the video in the tabs above \r\nshowing how to use the diamond core bit.\u003c\/p\u003e\r\n\u003ch4\u003eAn indication of the correct spindle speed:\u003c\/h4\u003e\r\n\u003ctable class=\"SpecsTable\" style=\"width: 100%\"\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecHeading\" style=\"width: 50%\"\u003eDIAMOND CORE BIT DIAMETER\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecHeading\" style=\"width: 50%\"\u003eSPINDLE SPEED\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??5.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e800 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??6.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e600 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??7.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e500 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??8.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e500 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003eØ10.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e400 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003eMore than Ø10.0mm (\u0026gt;10.0mm)\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003eless than 400 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\u003c\/table\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp class=\"attention-products\"\u003e\u003cstrong\u003eIMPORTANT:\u003c\/strong\u003e\u003cbr\u003e\r\nThe tool life will mostly depend on the proper usage and the hardness of the items \r\ndrilled into. It is normal for a diamond core bit to last up to 10 or more \r\ndrilled holes in hard tiles. Please remember to \u003cstrong\u003ealways\u003c\/strong\u003e use \r\nwater when drilling with diamond core bits.\u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n","published_at":"2017-03-08T08:49:37-05:00","created_at":"2017-03-08T08:49:41-05:00","vendor":"TORK CRAFT","type":"Diamond Core Bit","tags":["Diamond core bit","Drill bits"],"price":29383,"price_min":29383,"price_max":29383,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":37695349062,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"DCB005","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"DIAMOND CORE BIT 5MM FOR HARD TILES AND PORCELAIN","public_title":null,"options":["Default Title"],"price":29383,"weight":25,"compare_at_price":null,"inventory_quantity":212,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/wwbits.myshopify.com\/cdn\/shop\/products\/DCB005.jpg?v=1488980981"],"featured_image":"\/\/wwbits.myshopify.com\/cdn\/shop\/products\/DCB005.jpg?v=1488980981","options":["Title"],"media":[{"alt":"DIAMOND CORE BIT 5MM FOR HARD TILES AND PORCELAIN","id":521356476451,"position":1,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/wwbits.myshopify.com\/cdn\/shop\/products\/DCB005.jpg?v=1488980981"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/wwbits.myshopify.com\/cdn\/shop\/products\/DCB005.jpg?v=1488980981","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003c!-- Product header --\u003e\r\n\u003cdiv id=\"tc-desc-header\"\u003e\r\n\t\u003cspan class=\"description-headingBox\"\u003eØ5mm Diamond core bit\u003c\/span\u003e\n\u003c\/div\u003e\r\n\u003ch4\u003e\r\n\u003cimg alt=\"\" height=\"175\" src=\"http:\/\/www.vermontsales.co.za\/images\/torkcraft\/drillbits\/diamond\/dcb_sm1.jpg\" style=\"float: right\" width=\"275\"\u003eApplication:\u003c\/h4\u003e\r\n\u003cp\u003eThe diamond core bit is used to drill holes in:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\t\u003cli\u003eCeramic tiles\u003c\/li\u003e\r\n\t\u003cli\u003eMarble\u003c\/li\u003e\r\n\t\u003cli\u003eGrade 5 porcelain (hardest)\u003c\/li\u003e\r\n\t\u003cli\u003eGranite\u003c\/li\u003e\r\n\t\u003cli\u003eGlass\u003c\/li\u003e\r\n\t\u003cli\u003eSlate\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003eThe diamond core cuts faster, smoother and lasts longer than any other core \r\ndrills.\u003c\/p\u003e\r\n\u003ch4\u003eHow to use the diamond core bit:\u003c\/h4\u003e\r\n\u003cp\u003eThe diamond core drill bit must be used with water at all times when \r\ndrilling. The water serves as a coolant to prevent the diamonds from \r\noverheating. The maximum allowable temperature for a diamond core bit is 500°C.\u003c\/p\u003e\r\n\u003cp\u003eThere is no pilot drill with the diamond core bit. A low rpm rotary drill \r\nwith a planetary gearbox is required to be used with a diamond core bit. It is \r\npossible to use a cordless drill, but in the lowest gear setting. No hammer \r\naction is used.\u003c\/p\u003e\r\n\u003col\u003e\r\n\t\u003cli\u003eTightly fasten the diamond core bit in the drill's chuck.\u003c\/li\u003e\r\n\t\u003cli\u003eKeep the bit steady at a 45?ø angle \r\n\twith the starting point on the edge of the assigned area to be \r\n\tdrilled whilst the bit is rotating.\u003c\/li\u003e\r\n\t\u003cli\u003eA notch will be made (this is normal). \r\n\tGradually move the drill from 45° to 90° and continue drilling until \r\n\tfinished.\u003c\/li\u003e\r\n\t\u003cli\u003eAllow the diamond core bit to cool down completely before proceeding to \r\n\tdrill another hole.\u003c\/li\u003e\r\n\u003c\/ol\u003e\r\n\u003cp\u003eWater can be applied by:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\t\u003cli\u003espraying water on the surface,\u003c\/li\u003e\r\n\t\u003cli\u003eusing a wet sponge,\u003c\/li\u003e\r\n\t\u003cli\u003eattaching a water feed device. This is necessary when drilling into a \r\n\twall tile.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp class=\"info-products\"\u003ePlease have a look at the video in the tabs above \r\nshowing how to use the diamond core bit.\u003c\/p\u003e\r\n\u003ch4\u003eAn indication of the correct spindle speed:\u003c\/h4\u003e\r\n\u003ctable class=\"SpecsTable\" style=\"width: 100%\"\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecHeading\" style=\"width: 50%\"\u003eDIAMOND CORE BIT DIAMETER\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecHeading\" style=\"width: 50%\"\u003eSPINDLE SPEED\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??5.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e800 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??6.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e600 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??7.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e500 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??8.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e500 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003eØ10.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e400 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003eMore than Ø10.0mm (\u0026gt;10.0mm)\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003eless than 400 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\u003c\/table\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp class=\"attention-products\"\u003e\u003cstrong\u003eIMPORTANT:\u003c\/strong\u003e\u003cbr\u003e\r\nThe tool life will mostly depend on the proper usage and the hardness of the items \r\ndrilled into. It is normal for a diamond core bit to last up to 10 or more \r\ndrilled holes in hard tiles. Please remember to \u003cstrong\u003ealways\u003c\/strong\u003e use \r\nwater when drilling with diamond core bits.\u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n"}

DIAMOND CORE BIT 57MM FOR TILES HEX SHANK

R 493.36

DIAMOND CORE BIT 50MM FOR TILES

Ø10mm Diamond core bit Application: The diamond core bit is used to drill holes in: Ceramic tiles Marble Grade 5 porcelain (hardest) Granite Glass Slate...

R 449.00

{"id":9892829574,"title":"DIAMOND CORE BIT 50MM FOR TILES","handle":"diamond-core-bit-50mm-for-tiles","description":"\u003c!-- Product header --\u003e\r\n\u003cdiv id=\"tc-desc-header\"\u003e\r\n\t\u003cspan class=\"description-headingBox\"\u003eØ10mm Diamond core bit\u003c\/span\u003e\n\u003c\/div\u003e\r\n\u003ch4\u003e\r\n\u003cimg height=\"304\" src=\"http:\/\/www.vermontsales.co.za\/images\/torkcraft\/drillbits\/diamond\/tc1808_sm2.jpg\" style=\"float: right\" width=\"275\"\u003eApplication:\u003c\/h4\u003e\r\n\u003cp\u003eThe diamond core bit is used to drill holes in:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\t\u003cli\u003eCeramic tiles\u003c\/li\u003e\r\n\t\u003cli\u003eMarble\u003c\/li\u003e\r\n\t\u003cli\u003eGrade 5 porcelain (hardest)\u003c\/li\u003e\r\n\t\u003cli\u003eGranite\u003c\/li\u003e\r\n\t\u003cli\u003eGlass\u003c\/li\u003e\r\n\t\u003cli\u003eSlate\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003eThe diamond core cuts faster, smoother and lasts longer than any other core \r\ndrills.\u003c\/p\u003e\r\n\u003ch4\u003eHow to use the diamond core bit:\u003c\/h4\u003e\r\n\u003cp\u003eThe diamond core drill bit must be used with water at all times when \r\ndrilling. The water serves as a coolant to prevent the diamonds from \r\noverheating. The maximum allowable temperature for a diamond core bit is 500°C.\u003c\/p\u003e\r\n\u003cp\u003eThere is no pilot drill with the diamond core bit. A low rpm rotary drill \r\nwith a planetary gearbox is required to be used with a diamond core bit. It is \r\npossible to use a cordless drill, but in the lowest gear setting. No hammer \r\naction is used.\u003c\/p\u003e\r\n\u003col\u003e\r\n\t\u003cli\u003eTightly fasten the diamond core bit in the drill's chuck.\u003c\/li\u003e\r\n\t\u003cli\u003eKeep the bit steady at a 45?ø angle \r\n\twith the starting point on the edge of the assigned area to be \r\n\tdrilled whilst the bit is rotating.\u003c\/li\u003e\r\n\t\u003cli\u003eA notch will be made (this is normal). \r\n\tGradually move the drill from 45° to 90° and continue drilling until \r\n\tfinished.\u003c\/li\u003e\r\n\t\u003cli\u003eAllow the diamond core bit to cool down completely before proceeding to \r\n\tdrill another hole.\u003c\/li\u003e\r\n\u003c\/ol\u003e\r\n\u003cp\u003eWater can be applied by:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\t\u003cli\u003espraying water on the surface,\u003c\/li\u003e\r\n\t\u003cli\u003eusing a wet sponge,\u003c\/li\u003e\r\n\t\u003cli\u003eattaching a water feed device. This is necessary when drilling into a \r\n\twall tile.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp class=\"info-products\"\u003ePlease have a look at the video in the tabs above \r\nshowing how to use the diamond core bit.\u003c\/p\u003e\r\n\u003ch4\u003eAn indication of the correct spindle speed:\u003c\/h4\u003e\r\n\u003ctable class=\"SpecsTable\" style=\"width: 100%\"\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecHeading\" style=\"width: 50%\"\u003eDIAMOND CORE BIT DIAMETER\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecHeading\" style=\"width: 50%\"\u003eSPINDLE SPEED\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??5.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e800 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??6.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e600 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??7.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e500 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??8.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e500 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003eØ10.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e400 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003eMore than Ø50.0mm (\u0026gt;10.0mm)\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003eless than 400 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\u003c\/table\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp class=\"attention-products\"\u003e\u003cstrong\u003eIMPORTANT:\u003c\/strong\u003e\u003cbr\u003e\r\nThe tool life will mostly depend on the proper usage and the hardness of the items \r\ndrilled into. It is normal for a diamond core bit to last up to 10 or more \r\ndrilled holes in hard tiles. Please remember to \u003cstrong\u003ealways\u003c\/strong\u003e use \r\nwater when drilling with diamond core bits.\u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n","published_at":"2017-03-08T20:11:45-05:00","created_at":"2017-03-08T20:11:48-05:00","vendor":"TORK CRAFT","type":"Diamond Core Bit","tags":["Diamond core bit","Drill bits"],"price":44900,"price_min":44900,"price_max":44900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":37796345926,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"TC180850","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"DIAMOND CORE BIT 50MM FOR TILES","public_title":null,"options":["Default Title"],"price":44900,"weight":155,"compare_at_price":null,"inventory_quantity":402,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/wwbits.myshopify.com\/cdn\/shop\/products\/TC180850.jpg?v=1489021908"],"featured_image":"\/\/wwbits.myshopify.com\/cdn\/shop\/products\/TC180850.jpg?v=1489021908","options":["Title"],"media":[{"alt":"DIAMOND CORE BIT 50MM FOR TILES","id":522398400547,"position":1,"preview_image":{"aspect_ratio":1.083,"height":350,"width":379,"src":"\/\/wwbits.myshopify.com\/cdn\/shop\/products\/TC180850.jpg?v=1489021908"},"aspect_ratio":1.083,"height":350,"media_type":"image","src":"\/\/wwbits.myshopify.com\/cdn\/shop\/products\/TC180850.jpg?v=1489021908","width":379}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003c!-- Product header --\u003e\r\n\u003cdiv id=\"tc-desc-header\"\u003e\r\n\t\u003cspan class=\"description-headingBox\"\u003eØ10mm Diamond core bit\u003c\/span\u003e\n\u003c\/div\u003e\r\n\u003ch4\u003e\r\n\u003cimg height=\"304\" src=\"http:\/\/www.vermontsales.co.za\/images\/torkcraft\/drillbits\/diamond\/tc1808_sm2.jpg\" style=\"float: right\" width=\"275\"\u003eApplication:\u003c\/h4\u003e\r\n\u003cp\u003eThe diamond core bit is used to drill holes in:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\t\u003cli\u003eCeramic tiles\u003c\/li\u003e\r\n\t\u003cli\u003eMarble\u003c\/li\u003e\r\n\t\u003cli\u003eGrade 5 porcelain (hardest)\u003c\/li\u003e\r\n\t\u003cli\u003eGranite\u003c\/li\u003e\r\n\t\u003cli\u003eGlass\u003c\/li\u003e\r\n\t\u003cli\u003eSlate\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003eThe diamond core cuts faster, smoother and lasts longer than any other core \r\ndrills.\u003c\/p\u003e\r\n\u003ch4\u003eHow to use the diamond core bit:\u003c\/h4\u003e\r\n\u003cp\u003eThe diamond core drill bit must be used with water at all times when \r\ndrilling. The water serves as a coolant to prevent the diamonds from \r\noverheating. The maximum allowable temperature for a diamond core bit is 500°C.\u003c\/p\u003e\r\n\u003cp\u003eThere is no pilot drill with the diamond core bit. A low rpm rotary drill \r\nwith a planetary gearbox is required to be used with a diamond core bit. It is \r\npossible to use a cordless drill, but in the lowest gear setting. No hammer \r\naction is used.\u003c\/p\u003e\r\n\u003col\u003e\r\n\t\u003cli\u003eTightly fasten the diamond core bit in the drill's chuck.\u003c\/li\u003e\r\n\t\u003cli\u003eKeep the bit steady at a 45?ø angle \r\n\twith the starting point on the edge of the assigned area to be \r\n\tdrilled whilst the bit is rotating.\u003c\/li\u003e\r\n\t\u003cli\u003eA notch will be made (this is normal). \r\n\tGradually move the drill from 45° to 90° and continue drilling until \r\n\tfinished.\u003c\/li\u003e\r\n\t\u003cli\u003eAllow the diamond core bit to cool down completely before proceeding to \r\n\tdrill another hole.\u003c\/li\u003e\r\n\u003c\/ol\u003e\r\n\u003cp\u003eWater can be applied by:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\t\u003cli\u003espraying water on the surface,\u003c\/li\u003e\r\n\t\u003cli\u003eusing a wet sponge,\u003c\/li\u003e\r\n\t\u003cli\u003eattaching a water feed device. This is necessary when drilling into a \r\n\twall tile.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp class=\"info-products\"\u003ePlease have a look at the video in the tabs above \r\nshowing how to use the diamond core bit.\u003c\/p\u003e\r\n\u003ch4\u003eAn indication of the correct spindle speed:\u003c\/h4\u003e\r\n\u003ctable class=\"SpecsTable\" style=\"width: 100%\"\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecHeading\" style=\"width: 50%\"\u003eDIAMOND CORE BIT DIAMETER\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecHeading\" style=\"width: 50%\"\u003eSPINDLE SPEED\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??5.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e800 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??6.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e600 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??7.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e500 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??8.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e500 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003eØ10.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e400 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003eMore than Ø50.0mm (\u0026gt;10.0mm)\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003eless than 400 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\u003c\/table\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp class=\"attention-products\"\u003e\u003cstrong\u003eIMPORTANT:\u003c\/strong\u003e\u003cbr\u003e\r\nThe tool life will mostly depend on the proper usage and the hardness of the items \r\ndrilled into. It is normal for a diamond core bit to last up to 10 or more \r\ndrilled holes in hard tiles. Please remember to \u003cstrong\u003ealways\u003c\/strong\u003e use \r\nwater when drilling with diamond core bits.\u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n"}

DIAMOND CORE BIT 4MM FOR TILES

Ø4mm Diamond core bit Application: The diamond core bit is used to drill holes in: Ceramic tiles Marble Grade 5 porcelain (hardest) Granite Glass Slate...

R 45.75

{"id":9892821638,"title":"DIAMOND CORE BIT 4MM FOR TILES","handle":"diamond-core-bit-4mm-for-tiles","description":"\u003c!-- Product header --\u003e\r\n\u003cdiv id=\"tc-desc-header\"\u003e\r\n\t\u003cspan class=\"description-headingBox\"\u003eØ4mm Diamond core bit\u003c\/span\u003e\n\u003c\/div\u003e\r\n\u003ch4\u003e\r\n\u003cimg height=\"402\" src=\"http:\/\/www.vermontsales.co.za\/images\/torkcraft\/drillbits\/diamond\/tc1808_sm1.jpg\" style=\"float: right;margin-bottom:10px\" width=\"275\"\u003eApplication:\u003c\/h4\u003e\r\n\u003cp\u003eThe diamond core bit is used to drill holes in:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\t\u003cli\u003eCeramic tiles\u003c\/li\u003e\r\n\t\u003cli\u003eMarble\u003c\/li\u003e\r\n\t\u003cli\u003eGrade 5 porcelain (hardest)\u003c\/li\u003e\r\n\t\u003cli\u003eGranite\u003c\/li\u003e\r\n\t\u003cli\u003eGlass\u003c\/li\u003e\r\n\t\u003cli\u003eSlate\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003eThe diamond core cuts faster, smoother and lasts longer than any other core \r\ndrills.\u003c\/p\u003e\r\n\u003ch4\u003eHow to use the diamond core bit:\u003c\/h4\u003e\r\n\u003cp\u003eThe diamond core drill bit must be used with water at all times when \r\ndrilling. The water serves as a coolant to prevent the diamonds from \r\noverheating. The maximum allowable temperature for a diamond core bit is 500°C.\u003c\/p\u003e\r\n\u003cp\u003eThere is no pilot drill with the diamond core bit. A low rpm rotary drill \r\nwith a planetary gearbox is required to be used with a diamond core bit. It is \r\npossible to use a cordless drill, but in the lowest gear setting. No hammer \r\naction is used.\u003c\/p\u003e\r\n\u003col\u003e\r\n\t\u003cli\u003eTightly fasten the diamond core bit in the drill's chuck.\u003c\/li\u003e\r\n\t\u003cli\u003eKeep the bit steady at a 45?ø angle \r\n\twith the starting point on the edge of the assigned area to be \r\n\tdrilled whilst the bit is rotating.\u003c\/li\u003e\r\n\t\u003cli\u003eA notch will be made (this is normal). \r\n\tGradually move the drill from 45° to 90° and continue drilling until \r\n\tfinished.\u003c\/li\u003e\r\n\t\u003cli\u003eAllow the diamond core bit to cool down completely before proceeding to \r\n\tdrill another hole.\u003c\/li\u003e\r\n\u003c\/ol\u003e\r\n\u003cp\u003eWater can be applied by:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\t\u003cli\u003espraying water on the surface,\u003c\/li\u003e\r\n\t\u003cli\u003eusing a wet sponge,\u003c\/li\u003e\r\n\t\u003cli\u003eattaching a water feed device. This is necessary when drilling into a \r\n\twall tile.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp class=\"info-products\"\u003ePlease have a look at the video in the tabs above \r\nshowing how to use the diamond core bit.\u003c\/p\u003e\r\n\u003ch4\u003eAn indication of the correct spindle speed:\u003c\/h4\u003e\r\n\u003ctable class=\"SpecsTable\" style=\"width: 100%\"\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecHeading\" style=\"width: 50%\"\u003eDIAMOND CORE BIT DIAMETER\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecHeading\" style=\"width: 50%\"\u003eSPINDLE SPEED\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??5.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e800 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??6.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e600 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??7.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e500 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??8.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e500 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003eØ10.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e400 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003eMore than Ø10.0mm (\u0026gt;10.0mm)\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003eless than 400 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\u003c\/table\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp class=\"attention-products\"\u003e\u003cstrong\u003eIMPORTANT:\u003c\/strong\u003e\u003cbr\u003e\r\nThe tool life will mostly depend on the proper usage and the hardness of the items \r\ndrilled into. It is normal for a diamond core bit to last up to 10 or more \r\ndrilled holes in hard tiles. Please remember to \u003cstrong\u003ealways\u003c\/strong\u003e use \r\nwater when drilling with diamond core bits.\u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n","published_at":"2017-03-08T20:10:52-05:00","created_at":"2017-03-08T20:10:53-05:00","vendor":"TORK CRAFT","type":"Diamond Core Bit","tags":["Diamond core bit","Drill bits"],"price":4575,"price_min":4575,"price_max":4575,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":37796238470,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"TC180804","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"DIAMOND CORE BIT 4MM FOR TILES","public_title":null,"options":["Default Title"],"price":4575,"weight":15,"compare_at_price":null,"inventory_quantity":93,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/wwbits.myshopify.com\/cdn\/shop\/products\/TC180804.jpg?v=1489021853"],"featured_image":"\/\/wwbits.myshopify.com\/cdn\/shop\/products\/TC180804.jpg?v=1489021853","options":["Title"],"media":[{"alt":"DIAMOND CORE BIT 4MM FOR TILES","id":522397777955,"position":1,"preview_image":{"aspect_ratio":0.963,"height":350,"width":337,"src":"\/\/wwbits.myshopify.com\/cdn\/shop\/products\/TC180804.jpg?v=1489021853"},"aspect_ratio":0.963,"height":350,"media_type":"image","src":"\/\/wwbits.myshopify.com\/cdn\/shop\/products\/TC180804.jpg?v=1489021853","width":337}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003c!-- Product header --\u003e\r\n\u003cdiv id=\"tc-desc-header\"\u003e\r\n\t\u003cspan class=\"description-headingBox\"\u003eØ4mm Diamond core bit\u003c\/span\u003e\n\u003c\/div\u003e\r\n\u003ch4\u003e\r\n\u003cimg height=\"402\" src=\"http:\/\/www.vermontsales.co.za\/images\/torkcraft\/drillbits\/diamond\/tc1808_sm1.jpg\" style=\"float: right;margin-bottom:10px\" width=\"275\"\u003eApplication:\u003c\/h4\u003e\r\n\u003cp\u003eThe diamond core bit is used to drill holes in:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\t\u003cli\u003eCeramic tiles\u003c\/li\u003e\r\n\t\u003cli\u003eMarble\u003c\/li\u003e\r\n\t\u003cli\u003eGrade 5 porcelain (hardest)\u003c\/li\u003e\r\n\t\u003cli\u003eGranite\u003c\/li\u003e\r\n\t\u003cli\u003eGlass\u003c\/li\u003e\r\n\t\u003cli\u003eSlate\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003eThe diamond core cuts faster, smoother and lasts longer than any other core \r\ndrills.\u003c\/p\u003e\r\n\u003ch4\u003eHow to use the diamond core bit:\u003c\/h4\u003e\r\n\u003cp\u003eThe diamond core drill bit must be used with water at all times when \r\ndrilling. The water serves as a coolant to prevent the diamonds from \r\noverheating. The maximum allowable temperature for a diamond core bit is 500°C.\u003c\/p\u003e\r\n\u003cp\u003eThere is no pilot drill with the diamond core bit. A low rpm rotary drill \r\nwith a planetary gearbox is required to be used with a diamond core bit. It is \r\npossible to use a cordless drill, but in the lowest gear setting. No hammer \r\naction is used.\u003c\/p\u003e\r\n\u003col\u003e\r\n\t\u003cli\u003eTightly fasten the diamond core bit in the drill's chuck.\u003c\/li\u003e\r\n\t\u003cli\u003eKeep the bit steady at a 45?ø angle \r\n\twith the starting point on the edge of the assigned area to be \r\n\tdrilled whilst the bit is rotating.\u003c\/li\u003e\r\n\t\u003cli\u003eA notch will be made (this is normal). \r\n\tGradually move the drill from 45° to 90° and continue drilling until \r\n\tfinished.\u003c\/li\u003e\r\n\t\u003cli\u003eAllow the diamond core bit to cool down completely before proceeding to \r\n\tdrill another hole.\u003c\/li\u003e\r\n\u003c\/ol\u003e\r\n\u003cp\u003eWater can be applied by:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\t\u003cli\u003espraying water on the surface,\u003c\/li\u003e\r\n\t\u003cli\u003eusing a wet sponge,\u003c\/li\u003e\r\n\t\u003cli\u003eattaching a water feed device. This is necessary when drilling into a \r\n\twall tile.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp class=\"info-products\"\u003ePlease have a look at the video in the tabs above \r\nshowing how to use the diamond core bit.\u003c\/p\u003e\r\n\u003ch4\u003eAn indication of the correct spindle speed:\u003c\/h4\u003e\r\n\u003ctable class=\"SpecsTable\" style=\"width: 100%\"\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecHeading\" style=\"width: 50%\"\u003eDIAMOND CORE BIT DIAMETER\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecHeading\" style=\"width: 50%\"\u003eSPINDLE SPEED\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??5.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e800 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??6.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e600 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??7.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e500 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??8.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e500 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003eØ10.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e400 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003eMore than Ø10.0mm (\u0026gt;10.0mm)\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003eless than 400 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\u003c\/table\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp class=\"attention-products\"\u003e\u003cstrong\u003eIMPORTANT:\u003c\/strong\u003e\u003cbr\u003e\r\nThe tool life will mostly depend on the proper usage and the hardness of the items \r\ndrilled into. It is normal for a diamond core bit to last up to 10 or more \r\ndrilled holes in hard tiles. Please remember to \u003cstrong\u003ealways\u003c\/strong\u003e use \r\nwater when drilling with diamond core bits.\u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n"}

DIAMOND CORE BIT 40MM FOR TILES

Ø10mm Diamond core bit Application: The diamond core bit is used to drill holes in: Ceramic tiles Marble Grade 5 porcelain (hardest) Granite Glass Slate...

R 326.00

{"id":9892829318,"title":"DIAMOND CORE BIT 40MM FOR TILES","handle":"diamond-core-bit-40mm-for-tiles","description":"\u003c!-- Product header --\u003e\r\n\u003cdiv id=\"tc-desc-header\"\u003e\r\n\t\u003cspan class=\"description-headingBox\"\u003eØ10mm Diamond core bit\u003c\/span\u003e\n\u003c\/div\u003e\r\n\u003ch4\u003e\r\n\u003cimg height=\"304\" src=\"http:\/\/www.vermontsales.co.za\/images\/torkcraft\/drillbits\/diamond\/tc1808_sm2.jpg\" style=\"float: right\" width=\"275\"\u003eApplication:\u003c\/h4\u003e\r\n\u003cp\u003eThe diamond core bit is used to drill holes in:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\t\u003cli\u003eCeramic tiles\u003c\/li\u003e\r\n\t\u003cli\u003eMarble\u003c\/li\u003e\r\n\t\u003cli\u003eGrade 5 porcelain (hardest)\u003c\/li\u003e\r\n\t\u003cli\u003eGranite\u003c\/li\u003e\r\n\t\u003cli\u003eGlass\u003c\/li\u003e\r\n\t\u003cli\u003eSlate\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003eThe diamond core cuts faster, smoother and lasts longer than any other core \r\ndrills.\u003c\/p\u003e\r\n\u003ch4\u003eHow to use the diamond core bit:\u003c\/h4\u003e\r\n\u003cp\u003eThe diamond core drill bit must be used with water at all times when \r\ndrilling. The water serves as a coolant to prevent the diamonds from \r\noverheating. The maximum allowable temperature for a diamond core bit is 500°C.\u003c\/p\u003e\r\n\u003cp\u003eThere is no pilot drill with the diamond core bit. A low rpm rotary drill \r\nwith a planetary gearbox is required to be used with a diamond core bit. It is \r\npossible to use a cordless drill, but in the lowest gear setting. No hammer \r\naction is used.\u003c\/p\u003e\r\n\u003col\u003e\r\n\t\u003cli\u003eTightly fasten the diamond core bit in the drill's chuck.\u003c\/li\u003e\r\n\t\u003cli\u003eKeep the bit steady at a 45?ø angle \r\n\twith the starting point on the edge of the assigned area to be \r\n\tdrilled whilst the bit is rotating.\u003c\/li\u003e\r\n\t\u003cli\u003eA notch will be made (this is normal). \r\n\tGradually move the drill from 45° to 90° and continue drilling until \r\n\tfinished.\u003c\/li\u003e\r\n\t\u003cli\u003eAllow the diamond core bit to cool down completely before proceeding to \r\n\tdrill another hole.\u003c\/li\u003e\r\n\u003c\/ol\u003e\r\n\u003cp\u003eWater can be applied by:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\t\u003cli\u003espraying water on the surface,\u003c\/li\u003e\r\n\t\u003cli\u003eusing a wet sponge,\u003c\/li\u003e\r\n\t\u003cli\u003eattaching a water feed device. This is necessary when drilling into a \r\n\twall tile.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp class=\"info-products\"\u003ePlease have a look at the video in the tabs above \r\nshowing how to use the diamond core bit.\u003c\/p\u003e\r\n\u003ch4\u003eAn indication of the correct spindle speed:\u003c\/h4\u003e\r\n\u003ctable class=\"SpecsTable\" style=\"width: 100%\"\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecHeading\" style=\"width: 50%\"\u003eDIAMOND CORE BIT DIAMETER\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecHeading\" style=\"width: 50%\"\u003eSPINDLE SPEED\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??5.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e800 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??6.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e600 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??7.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e500 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??8.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e500 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003eØ10.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e400 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003eMore than Ø40.0mm (\u0026gt;10.0mm)\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003eless than 400 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\u003c\/table\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp class=\"attention-products\"\u003e\u003cstrong\u003eIMPORTANT:\u003c\/strong\u003e\u003cbr\u003e\r\nThe tool life will mostly depend on the proper usage and the hardness of the items \r\ndrilled into. It is normal for a diamond core bit to last up to 10 or more \r\ndrilled holes in hard tiles. Please remember to \u003cstrong\u003ealways\u003c\/strong\u003e use \r\nwater when drilling with diamond core bits.\u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n","published_at":"2017-03-08T20:11:41-05:00","created_at":"2017-03-08T20:11:45-05:00","vendor":"TORK CRAFT","type":"Diamond Core Bit","tags":["Diamond core bit","Drill bits"],"price":32600,"price_min":32600,"price_max":32600,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":37796344838,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"TC180840","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"DIAMOND CORE BIT 40MM FOR TILES","public_title":null,"options":["Default Title"],"price":32600,"weight":106,"compare_at_price":null,"inventory_quantity":42,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/wwbits.myshopify.com\/cdn\/shop\/products\/TC180840.jpg?v=1489021905"],"featured_image":"\/\/wwbits.myshopify.com\/cdn\/shop\/products\/TC180840.jpg?v=1489021905","options":["Title"],"media":[{"alt":"DIAMOND CORE BIT 40MM FOR TILES","id":522398367779,"position":1,"preview_image":{"aspect_ratio":1.1,"height":350,"width":385,"src":"\/\/wwbits.myshopify.com\/cdn\/shop\/products\/TC180840.jpg?v=1489021905"},"aspect_ratio":1.1,"height":350,"media_type":"image","src":"\/\/wwbits.myshopify.com\/cdn\/shop\/products\/TC180840.jpg?v=1489021905","width":385}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003c!-- Product header --\u003e\r\n\u003cdiv id=\"tc-desc-header\"\u003e\r\n\t\u003cspan class=\"description-headingBox\"\u003eØ10mm Diamond core bit\u003c\/span\u003e\n\u003c\/div\u003e\r\n\u003ch4\u003e\r\n\u003cimg height=\"304\" src=\"http:\/\/www.vermontsales.co.za\/images\/torkcraft\/drillbits\/diamond\/tc1808_sm2.jpg\" style=\"float: right\" width=\"275\"\u003eApplication:\u003c\/h4\u003e\r\n\u003cp\u003eThe diamond core bit is used to drill holes in:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\t\u003cli\u003eCeramic tiles\u003c\/li\u003e\r\n\t\u003cli\u003eMarble\u003c\/li\u003e\r\n\t\u003cli\u003eGrade 5 porcelain (hardest)\u003c\/li\u003e\r\n\t\u003cli\u003eGranite\u003c\/li\u003e\r\n\t\u003cli\u003eGlass\u003c\/li\u003e\r\n\t\u003cli\u003eSlate\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003eThe diamond core cuts faster, smoother and lasts longer than any other core \r\ndrills.\u003c\/p\u003e\r\n\u003ch4\u003eHow to use the diamond core bit:\u003c\/h4\u003e\r\n\u003cp\u003eThe diamond core drill bit must be used with water at all times when \r\ndrilling. The water serves as a coolant to prevent the diamonds from \r\noverheating. The maximum allowable temperature for a diamond core bit is 500°C.\u003c\/p\u003e\r\n\u003cp\u003eThere is no pilot drill with the diamond core bit. A low rpm rotary drill \r\nwith a planetary gearbox is required to be used with a diamond core bit. It is \r\npossible to use a cordless drill, but in the lowest gear setting. No hammer \r\naction is used.\u003c\/p\u003e\r\n\u003col\u003e\r\n\t\u003cli\u003eTightly fasten the diamond core bit in the drill's chuck.\u003c\/li\u003e\r\n\t\u003cli\u003eKeep the bit steady at a 45?ø angle \r\n\twith the starting point on the edge of the assigned area to be \r\n\tdrilled whilst the bit is rotating.\u003c\/li\u003e\r\n\t\u003cli\u003eA notch will be made (this is normal). \r\n\tGradually move the drill from 45° to 90° and continue drilling until \r\n\tfinished.\u003c\/li\u003e\r\n\t\u003cli\u003eAllow the diamond core bit to cool down completely before proceeding to \r\n\tdrill another hole.\u003c\/li\u003e\r\n\u003c\/ol\u003e\r\n\u003cp\u003eWater can be applied by:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\t\u003cli\u003espraying water on the surface,\u003c\/li\u003e\r\n\t\u003cli\u003eusing a wet sponge,\u003c\/li\u003e\r\n\t\u003cli\u003eattaching a water feed device. This is necessary when drilling into a \r\n\twall tile.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp class=\"info-products\"\u003ePlease have a look at the video in the tabs above \r\nshowing how to use the diamond core bit.\u003c\/p\u003e\r\n\u003ch4\u003eAn indication of the correct spindle speed:\u003c\/h4\u003e\r\n\u003ctable class=\"SpecsTable\" style=\"width: 100%\"\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecHeading\" style=\"width: 50%\"\u003eDIAMOND CORE BIT DIAMETER\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecHeading\" style=\"width: 50%\"\u003eSPINDLE SPEED\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??5.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e800 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??6.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e600 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??7.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e500 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??8.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e500 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003eØ10.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e400 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003eMore than Ø40.0mm (\u0026gt;10.0mm)\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003eless than 400 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\u003c\/table\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp class=\"attention-products\"\u003e\u003cstrong\u003eIMPORTANT:\u003c\/strong\u003e\u003cbr\u003e\r\nThe tool life will mostly depend on the proper usage and the hardness of the items \r\ndrilled into. It is normal for a diamond core bit to last up to 10 or more \r\ndrilled holes in hard tiles. Please remember to \u003cstrong\u003ealways\u003c\/strong\u003e use \r\nwater when drilling with diamond core bits.\u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n"}

DIAMOND CORE BIT 38MM FOR TILES

Ø38mm Diamond core bit Application: The diamond core bit is used to drill holes in: Ceramic tiles Marble Grade 5 porcelain (hardest) Granite Glass Slate...

R 319.00

{"id":10089231238,"title":"DIAMOND CORE BIT 38MM FOR TILES","handle":"diamond-core-bit-38mm-for-tiles","description":"\u003c!-- Product header --\u003e\r\n\u003cdiv id=\"tc-desc-header\"\u003e\r\n\t\u003cspan class=\"description-headingBox\"\u003eØ38mm Diamond core bit\u003c\/span\u003e\n\u003c\/div\u003e\r\n\u003ch4\u003e\r\n\u003cimg height=\"304\" src=\"http:\/\/www.vermontsales.co.za\/images\/torkcraft\/drillbits\/diamond\/tc1808_sm2.jpg\" style=\"float: right\" width=\"275\"\u003eApplication:\u003c\/h4\u003e\r\n\u003cp\u003eThe diamond core bit is used to drill holes in:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\t\u003cli\u003eCeramic tiles\u003c\/li\u003e\r\n\t\u003cli\u003eMarble\u003c\/li\u003e\r\n\t\u003cli\u003eGrade 5 porcelain (hardest)\u003c\/li\u003e\r\n\t\u003cli\u003eGranite\u003c\/li\u003e\r\n\t\u003cli\u003eGlass\u003c\/li\u003e\r\n\t\u003cli\u003eSlate\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003eThe diamond core cuts faster, smoother and lasts longer than any other core \r\ndrills.\u003c\/p\u003e\r\n\u003ch4\u003eHow to use the diamond core bit:\u003c\/h4\u003e\r\n\u003cp\u003eThe diamond core drill bit must be used with water at all times when \r\ndrilling. The water serves as a coolant to prevent the diamonds from \r\noverheating. The maximum allowable temperature for a diamond core bit is 500°C.\u003c\/p\u003e\r\n\u003cp\u003eThere is no pilot drill with the diamond core bit. A low rpm rotary drill \r\nwith a planetary gearbox is required to be used with a diamond core bit. It is \r\npossible to use a cordless drill, but in the lowest gear setting. No hammer \r\naction is used.\u003c\/p\u003e\r\n\u003col\u003e\r\n\t\u003cli\u003eTightly fasten the diamond core bit in the drill's chuck.\u003c\/li\u003e\r\n\t\u003cli\u003eKeep the bit steady at a 45?ø angle \r\n\twith the starting point on the edge of the assigned area to be \r\n\tdrilled whilst the bit is rotating.\u003c\/li\u003e\r\n\t\u003cli\u003eA notch will be made (this is normal). \r\n\tGradually move the drill from 45° to 90° and continue drilling until \r\n\tfinished.\u003c\/li\u003e\r\n\t\u003cli\u003eAllow the diamond core bit to cool down completely before proceeding to \r\n\tdrill another hole.\u003c\/li\u003e\r\n\u003c\/ol\u003e\r\n\u003cp\u003eWater can be applied by:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\t\u003cli\u003espraying water on the surface,\u003c\/li\u003e\r\n\t\u003cli\u003eusing a wet sponge,\u003c\/li\u003e\r\n\t\u003cli\u003eattaching a water feed device. This is necessary when drilling into a \r\n\twall tile.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp class=\"info-products\"\u003ePlease have a look at the video in the tabs above \r\nshowing how to use the diamond core bit.\u003c\/p\u003e\r\n\u003ch4\u003eAn indication of the correct spindle speed:\u003c\/h4\u003e\r\n\u003ctable class=\"SpecsTable\" style=\"width: 100%\"\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecHeading\" style=\"width: 50%\"\u003eDIAMOND CORE BIT DIAMETER\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecHeading\" style=\"width: 50%\"\u003eSPINDLE SPEED\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??5.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e800 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??6.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e600 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??7.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e500 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??8.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e500 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003eØ10.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e400 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003eMore than Ø10.0mm (\u0026gt;10.0mm)\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003eless than 400 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\u003c\/table\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp class=\"attention-products\"\u003e\u003cstrong\u003eIMPORTANT:\u003c\/strong\u003e\u003cbr\u003e\r\nThe tool life will mostly depend on the proper usage and the hardness of the items \r\ndrilled into. It is normal for a diamond core bit to last up to 10 or more \r\ndrilled holes in hard tiles. Please remember to \u003cstrong\u003ealways\u003c\/strong\u003e use \r\nwater when drilling with diamond core bits.\u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n","published_at":"2017-03-24T08:48:00-04:00","created_at":"2017-03-24T08:48:00-04:00","vendor":"TORK CRAFT","type":"Diamond Core Bit","tags":["Diamond core bit","Drill bits"],"price":31900,"price_min":31900,"price_max":31900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":40304947782,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"DIAMOND CORE BIT 38MM FOR TILES","public_title":null,"options":["Default Title"],"price":31900,"weight":105,"compare_at_price":null,"inventory_quantity":153,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":[],"featured_image":null,"options":["Title"],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003c!-- Product header --\u003e\r\n\u003cdiv id=\"tc-desc-header\"\u003e\r\n\t\u003cspan class=\"description-headingBox\"\u003eØ38mm Diamond core bit\u003c\/span\u003e\n\u003c\/div\u003e\r\n\u003ch4\u003e\r\n\u003cimg height=\"304\" src=\"http:\/\/www.vermontsales.co.za\/images\/torkcraft\/drillbits\/diamond\/tc1808_sm2.jpg\" style=\"float: right\" width=\"275\"\u003eApplication:\u003c\/h4\u003e\r\n\u003cp\u003eThe diamond core bit is used to drill holes in:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\t\u003cli\u003eCeramic tiles\u003c\/li\u003e\r\n\t\u003cli\u003eMarble\u003c\/li\u003e\r\n\t\u003cli\u003eGrade 5 porcelain (hardest)\u003c\/li\u003e\r\n\t\u003cli\u003eGranite\u003c\/li\u003e\r\n\t\u003cli\u003eGlass\u003c\/li\u003e\r\n\t\u003cli\u003eSlate\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003eThe diamond core cuts faster, smoother and lasts longer than any other core \r\ndrills.\u003c\/p\u003e\r\n\u003ch4\u003eHow to use the diamond core bit:\u003c\/h4\u003e\r\n\u003cp\u003eThe diamond core drill bit must be used with water at all times when \r\ndrilling. The water serves as a coolant to prevent the diamonds from \r\noverheating. The maximum allowable temperature for a diamond core bit is 500°C.\u003c\/p\u003e\r\n\u003cp\u003eThere is no pilot drill with the diamond core bit. A low rpm rotary drill \r\nwith a planetary gearbox is required to be used with a diamond core bit. It is \r\npossible to use a cordless drill, but in the lowest gear setting. No hammer \r\naction is used.\u003c\/p\u003e\r\n\u003col\u003e\r\n\t\u003cli\u003eTightly fasten the diamond core bit in the drill's chuck.\u003c\/li\u003e\r\n\t\u003cli\u003eKeep the bit steady at a 45?ø angle \r\n\twith the starting point on the edge of the assigned area to be \r\n\tdrilled whilst the bit is rotating.\u003c\/li\u003e\r\n\t\u003cli\u003eA notch will be made (this is normal). \r\n\tGradually move the drill from 45° to 90° and continue drilling until \r\n\tfinished.\u003c\/li\u003e\r\n\t\u003cli\u003eAllow the diamond core bit to cool down completely before proceeding to \r\n\tdrill another hole.\u003c\/li\u003e\r\n\u003c\/ol\u003e\r\n\u003cp\u003eWater can be applied by:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\t\u003cli\u003espraying water on the surface,\u003c\/li\u003e\r\n\t\u003cli\u003eusing a wet sponge,\u003c\/li\u003e\r\n\t\u003cli\u003eattaching a water feed device. This is necessary when drilling into a \r\n\twall tile.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp class=\"info-products\"\u003ePlease have a look at the video in the tabs above \r\nshowing how to use the diamond core bit.\u003c\/p\u003e\r\n\u003ch4\u003eAn indication of the correct spindle speed:\u003c\/h4\u003e\r\n\u003ctable class=\"SpecsTable\" style=\"width: 100%\"\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecHeading\" style=\"width: 50%\"\u003eDIAMOND CORE BIT DIAMETER\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecHeading\" style=\"width: 50%\"\u003eSPINDLE SPEED\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??5.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e800 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??6.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e600 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??7.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e500 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??8.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e500 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003eØ10.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e400 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003eMore than Ø10.0mm (\u0026gt;10.0mm)\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003eless than 400 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\u003c\/table\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp class=\"attention-products\"\u003e\u003cstrong\u003eIMPORTANT:\u003c\/strong\u003e\u003cbr\u003e\r\nThe tool life will mostly depend on the proper usage and the hardness of the items \r\ndrilled into. It is normal for a diamond core bit to last up to 10 or more \r\ndrilled holes in hard tiles. Please remember to \u003cstrong\u003ealways\u003c\/strong\u003e use \r\nwater when drilling with diamond core bits.\u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n"}

DIAMOND CORE BIT 35MM FOR TILES

Ø35mm Diamond core bit Application: The diamond core bit is used to drill holes in: Ceramic tiles Marble Grade 5 porcelain (hardest) Granite Glass Slate...

R 299.00

{"id":9892828806,"title":"DIAMOND CORE BIT 35MM FOR TILES","handle":"diamond-core-bit-35mm-for-tiles","description":"\u003c!-- Product header --\u003e\r\n\u003cdiv id=\"tc-desc-header\"\u003e\r\n\t\u003cspan class=\"description-headingBox\"\u003eØ35mm Diamond core bit\u003c\/span\u003e\n\u003c\/div\u003e\r\n\u003ch4\u003e\r\n\u003cimg height=\"304\" src=\"http:\/\/www.vermontsales.co.za\/images\/torkcraft\/drillbits\/diamond\/tc1808_sm2.jpg\" style=\"float: right\" width=\"275\"\u003eApplication:\u003c\/h4\u003e\r\n\u003cp\u003eThe diamond core bit is used to drill holes in:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\t\u003cli\u003eCeramic tiles\u003c\/li\u003e\r\n\t\u003cli\u003eMarble\u003c\/li\u003e\r\n\t\u003cli\u003eGrade 5 porcelain (hardest)\u003c\/li\u003e\r\n\t\u003cli\u003eGranite\u003c\/li\u003e\r\n\t\u003cli\u003eGlass\u003c\/li\u003e\r\n\t\u003cli\u003eSlate\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003eThe diamond core cuts faster, smoother and lasts longer than any other core \r\ndrills.\u003c\/p\u003e\r\n\u003ch4\u003eHow to use the diamond core bit:\u003c\/h4\u003e\r\n\u003cp\u003eThe diamond core drill bit must be used with water at all times when \r\ndrilling. The water serves as a coolant to prevent the diamonds from \r\noverheating. The maximum allowable temperature for a diamond core bit is 500°C.\u003c\/p\u003e\r\n\u003cp\u003eThere is no pilot drill with the diamond core bit. A low rpm rotary drill \r\nwith a planetary gearbox is required to be used with a diamond core bit. It is \r\npossible to use a cordless drill, but in the lowest gear setting. No hammer \r\naction is used.\u003c\/p\u003e\r\n\u003col\u003e\r\n\t\u003cli\u003eTightly fasten the diamond core bit in the drill's chuck.\u003c\/li\u003e\r\n\t\u003cli\u003eKeep the bit steady at a 45?ø angle \r\n\twith the starting point on the edge of the assigned area to be \r\n\tdrilled whilst the bit is rotating.\u003c\/li\u003e\r\n\t\u003cli\u003eA notch will be made (this is normal). \r\n\tGradually move the drill from 45° to 90° and continue drilling until \r\n\tfinished.\u003c\/li\u003e\r\n\t\u003cli\u003eAllow the diamond core bit to cool down completely before proceeding to \r\n\tdrill another hole.\u003c\/li\u003e\r\n\u003c\/ol\u003e\r\n\u003cp\u003eWater can be applied by:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\t\u003cli\u003espraying water on the surface,\u003c\/li\u003e\r\n\t\u003cli\u003eusing a wet sponge,\u003c\/li\u003e\r\n\t\u003cli\u003eattaching a water feed device. This is necessary when drilling into a \r\n\twall tile.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp class=\"info-products\"\u003ePlease have a look at the video in the tabs above \r\nshowing how to use the diamond core bit.\u003c\/p\u003e\r\n\u003ch4\u003eAn indication of the correct spindle speed:\u003c\/h4\u003e\r\n\u003ctable class=\"SpecsTable\" style=\"width: 100%\"\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecHeading\" style=\"width: 50%\"\u003eDIAMOND CORE BIT DIAMETER\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecHeading\" style=\"width: 50%\"\u003eSPINDLE SPEED\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??5.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e800 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??6.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e600 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??7.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e500 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??8.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e500 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003eØ10.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e400 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003eMore than Ø10.0mm (\u0026gt;10.0mm)\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003eless than 400 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\u003c\/table\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp class=\"attention-products\"\u003e\u003cstrong\u003eIMPORTANT:\u003c\/strong\u003e\u003cbr\u003e\r\nThe tool life will mostly depend on the proper usage and the hardness of the items \r\ndrilled into. It is normal for a diamond core bit to last up to 10 or more \r\ndrilled holes in hard tiles. Please remember to \u003cstrong\u003ealways\u003c\/strong\u003e use \r\nwater when drilling with diamond core bits.\u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n","published_at":"2017-03-08T20:11:36-05:00","created_at":"2017-03-08T20:11:38-05:00","vendor":"TORK CRAFT","type":"Diamond Core Bit","tags":["Diamond core bit","Drill bits"],"price":29900,"price_min":29900,"price_max":29900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":37796333702,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"TC180835","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"DIAMOND CORE BIT 35MM FOR TILES","public_title":null,"options":["Default Title"],"price":29900,"weight":92,"compare_at_price":null,"inventory_quantity":288,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/wwbits.myshopify.com\/cdn\/shop\/products\/TC180835.jpg?v=1489021899"],"featured_image":"\/\/wwbits.myshopify.com\/cdn\/shop\/products\/TC180835.jpg?v=1489021899","options":["Title"],"media":[{"alt":"DIAMOND CORE BIT 35MM FOR TILES","id":522398335011,"position":1,"preview_image":{"aspect_ratio":1.354,"height":350,"width":474,"src":"\/\/wwbits.myshopify.com\/cdn\/shop\/products\/TC180835.jpg?v=1489021899"},"aspect_ratio":1.354,"height":350,"media_type":"image","src":"\/\/wwbits.myshopify.com\/cdn\/shop\/products\/TC180835.jpg?v=1489021899","width":474}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003c!-- Product header --\u003e\r\n\u003cdiv id=\"tc-desc-header\"\u003e\r\n\t\u003cspan class=\"description-headingBox\"\u003eØ35mm Diamond core bit\u003c\/span\u003e\n\u003c\/div\u003e\r\n\u003ch4\u003e\r\n\u003cimg height=\"304\" src=\"http:\/\/www.vermontsales.co.za\/images\/torkcraft\/drillbits\/diamond\/tc1808_sm2.jpg\" style=\"float: right\" width=\"275\"\u003eApplication:\u003c\/h4\u003e\r\n\u003cp\u003eThe diamond core bit is used to drill holes in:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\t\u003cli\u003eCeramic tiles\u003c\/li\u003e\r\n\t\u003cli\u003eMarble\u003c\/li\u003e\r\n\t\u003cli\u003eGrade 5 porcelain (hardest)\u003c\/li\u003e\r\n\t\u003cli\u003eGranite\u003c\/li\u003e\r\n\t\u003cli\u003eGlass\u003c\/li\u003e\r\n\t\u003cli\u003eSlate\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003eThe diamond core cuts faster, smoother and lasts longer than any other core \r\ndrills.\u003c\/p\u003e\r\n\u003ch4\u003eHow to use the diamond core bit:\u003c\/h4\u003e\r\n\u003cp\u003eThe diamond core drill bit must be used with water at all times when \r\ndrilling. The water serves as a coolant to prevent the diamonds from \r\noverheating. The maximum allowable temperature for a diamond core bit is 500°C.\u003c\/p\u003e\r\n\u003cp\u003eThere is no pilot drill with the diamond core bit. A low rpm rotary drill \r\nwith a planetary gearbox is required to be used with a diamond core bit. It is \r\npossible to use a cordless drill, but in the lowest gear setting. No hammer \r\naction is used.\u003c\/p\u003e\r\n\u003col\u003e\r\n\t\u003cli\u003eTightly fasten the diamond core bit in the drill's chuck.\u003c\/li\u003e\r\n\t\u003cli\u003eKeep the bit steady at a 45?ø angle \r\n\twith the starting point on the edge of the assigned area to be \r\n\tdrilled whilst the bit is rotating.\u003c\/li\u003e\r\n\t\u003cli\u003eA notch will be made (this is normal). \r\n\tGradually move the drill from 45° to 90° and continue drilling until \r\n\tfinished.\u003c\/li\u003e\r\n\t\u003cli\u003eAllow the diamond core bit to cool down completely before proceeding to \r\n\tdrill another hole.\u003c\/li\u003e\r\n\u003c\/ol\u003e\r\n\u003cp\u003eWater can be applied by:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\t\u003cli\u003espraying water on the surface,\u003c\/li\u003e\r\n\t\u003cli\u003eusing a wet sponge,\u003c\/li\u003e\r\n\t\u003cli\u003eattaching a water feed device. This is necessary when drilling into a \r\n\twall tile.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp class=\"info-products\"\u003ePlease have a look at the video in the tabs above \r\nshowing how to use the diamond core bit.\u003c\/p\u003e\r\n\u003ch4\u003eAn indication of the correct spindle speed:\u003c\/h4\u003e\r\n\u003ctable class=\"SpecsTable\" style=\"width: 100%\"\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecHeading\" style=\"width: 50%\"\u003eDIAMOND CORE BIT DIAMETER\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecHeading\" style=\"width: 50%\"\u003eSPINDLE SPEED\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??5.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e800 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??6.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e600 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??7.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e500 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??8.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e500 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003eØ10.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e400 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003eMore than Ø10.0mm (\u0026gt;10.0mm)\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003eless than 400 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\u003c\/table\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp class=\"attention-products\"\u003e\u003cstrong\u003eIMPORTANT:\u003c\/strong\u003e\u003cbr\u003e\r\nThe tool life will mostly depend on the proper usage and the hardness of the items \r\ndrilled into. It is normal for a diamond core bit to last up to 10 or more \r\ndrilled holes in hard tiles. Please remember to \u003cstrong\u003ealways\u003c\/strong\u003e use \r\nwater when drilling with diamond core bits.\u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n"}

DIAMOND CORE BIT 32MM FOR TILES

Ø32mm Diamond core bit Application: The diamond core bit is used to drill holes in: Ceramic tiles Marble Grade 5 porcelain (hardest) Granite Glass Slate...

R 272.00

{"id":9892828422,"title":"DIAMOND CORE BIT 32MM FOR TILES","handle":"diamond-core-bit-32mm-for-tiles","description":"\u003c!-- Product header --\u003e\r\n\u003cdiv id=\"tc-desc-header\"\u003e\r\n\t\u003cspan class=\"description-headingBox\"\u003eØ32mm Diamond core bit\u003c\/span\u003e\n\u003c\/div\u003e\r\n\u003ch4\u003e\r\n\u003cimg height=\"402\" src=\"http:\/\/www.vermontsales.co.za\/images\/torkcraft\/drillbits\/diamond\/tc1808_sm1.jpg\" style=\"float: right;margin-bottom:10px\" width=\"275\"\u003eApplication:\u003c\/h4\u003e\r\n\u003cp\u003eThe diamond core bit is used to drill holes in:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\t\u003cli\u003eCeramic tiles\u003c\/li\u003e\r\n\t\u003cli\u003eMarble\u003c\/li\u003e\r\n\t\u003cli\u003eGrade 5 porcelain (hardest)\u003c\/li\u003e\r\n\t\u003cli\u003eGranite\u003c\/li\u003e\r\n\t\u003cli\u003eGlass\u003c\/li\u003e\r\n\t\u003cli\u003eSlate\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003eThe diamond core cuts faster, smoother and lasts longer than any other core \r\ndrills.\u003c\/p\u003e\r\n\u003ch4\u003eHow to use the diamond core bit:\u003c\/h4\u003e\r\n\u003cp\u003eThe diamond core drill bit must be used with water at all times when \r\ndrilling. The water serves as a coolant to prevent the diamonds from \r\noverheating. The maximum allowable temperature for a diamond core bit is 500°C.\u003c\/p\u003e\r\n\u003cp\u003eThere is no pilot drill with the diamond core bit. A low rpm rotary drill \r\nwith a planetary gearbox is required to be used with a diamond core bit. It is \r\npossible to use a cordless drill, but in the lowest gear setting. No hammer \r\naction is used.\u003c\/p\u003e\r\n\u003col\u003e\r\n\t\u003cli\u003eTightly fasten the diamond core bit in the drill's chuck.\u003c\/li\u003e\r\n\t\u003cli\u003eKeep the bit steady at a 45?ø angle \r\n\twith the starting point on the edge of the assigned area to be \r\n\tdrilled whilst the bit is rotating.\u003c\/li\u003e\r\n\t\u003cli\u003eA notch will be made (this is normal). \r\n\tGradually move the drill from 45° to 90° and continue drilling until \r\n\tfinished.\u003c\/li\u003e\r\n\t\u003cli\u003eAllow the diamond core bit to cool down completely before proceeding to \r\n\tdrill another hole.\u003c\/li\u003e\r\n\u003c\/ol\u003e\r\n\u003cp\u003eWater can be applied by:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\t\u003cli\u003espraying water on the surface,\u003c\/li\u003e\r\n\t\u003cli\u003eusing a wet sponge,\u003c\/li\u003e\r\n\t\u003cli\u003eattaching a water feed device. This is necessary when drilling into a \r\n\twall tile.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp class=\"info-products\"\u003ePlease have a look at the video in the tabs above \r\nshowing how to use the diamond core bit.\u003c\/p\u003e\r\n\u003ch4\u003eAn indication of the correct spindle speed:\u003c\/h4\u003e\r\n\u003ctable class=\"SpecsTable\" style=\"width: 100%\"\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecHeading\" style=\"width: 50%\"\u003eDIAMOND CORE BIT DIAMETER\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecHeading\" style=\"width: 50%\"\u003eSPINDLE SPEED\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??5.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e800 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??6.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e600 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??7.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e500 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??8.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e500 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003eØ10.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e400 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003eMore than Ø10.0mm (\u0026gt;10.0mm)\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003eless than 400 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\u003c\/table\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp class=\"attention-products\"\u003e\u003cstrong\u003eIMPORTANT:\u003c\/strong\u003e\u003cbr\u003e\r\nThe tool life will mostly depend on the proper usage and the hardness of the items \r\ndrilled into. It is normal for a diamond core bit to last up to 10 or more \r\ndrilled holes in hard tiles. Please remember to \u003cstrong\u003ealways\u003c\/strong\u003e use \r\nwater when drilling with diamond core bits.\u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n","published_at":"2017-03-08T20:11:33-05:00","created_at":"2017-03-08T20:11:35-05:00","vendor":"TORK CRAFT","type":"Diamond Core Bit","tags":["Diamond core bit","Drill bits"],"price":27200,"price_min":27200,"price_max":27200,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":37796324358,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"TC180832","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"DIAMOND CORE BIT 32MM FOR TILES","public_title":null,"options":["Default Title"],"price":27200,"weight":85,"compare_at_price":null,"inventory_quantity":618,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/wwbits.myshopify.com\/cdn\/shop\/products\/TC180832.jpg?v=1489021896"],"featured_image":"\/\/wwbits.myshopify.com\/cdn\/shop\/products\/TC180832.jpg?v=1489021896","options":["Title"],"media":[{"alt":"DIAMOND CORE BIT 32MM FOR TILES","id":522398302243,"position":1,"preview_image":{"aspect_ratio":1.354,"height":350,"width":474,"src":"\/\/wwbits.myshopify.com\/cdn\/shop\/products\/TC180832.jpg?v=1489021896"},"aspect_ratio":1.354,"height":350,"media_type":"image","src":"\/\/wwbits.myshopify.com\/cdn\/shop\/products\/TC180832.jpg?v=1489021896","width":474}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003c!-- Product header --\u003e\r\n\u003cdiv id=\"tc-desc-header\"\u003e\r\n\t\u003cspan class=\"description-headingBox\"\u003eØ32mm Diamond core bit\u003c\/span\u003e\n\u003c\/div\u003e\r\n\u003ch4\u003e\r\n\u003cimg height=\"402\" src=\"http:\/\/www.vermontsales.co.za\/images\/torkcraft\/drillbits\/diamond\/tc1808_sm1.jpg\" style=\"float: right;margin-bottom:10px\" width=\"275\"\u003eApplication:\u003c\/h4\u003e\r\n\u003cp\u003eThe diamond core bit is used to drill holes in:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\t\u003cli\u003eCeramic tiles\u003c\/li\u003e\r\n\t\u003cli\u003eMarble\u003c\/li\u003e\r\n\t\u003cli\u003eGrade 5 porcelain (hardest)\u003c\/li\u003e\r\n\t\u003cli\u003eGranite\u003c\/li\u003e\r\n\t\u003cli\u003eGlass\u003c\/li\u003e\r\n\t\u003cli\u003eSlate\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003eThe diamond core cuts faster, smoother and lasts longer than any other core \r\ndrills.\u003c\/p\u003e\r\n\u003ch4\u003eHow to use the diamond core bit:\u003c\/h4\u003e\r\n\u003cp\u003eThe diamond core drill bit must be used with water at all times when \r\ndrilling. The water serves as a coolant to prevent the diamonds from \r\noverheating. The maximum allowable temperature for a diamond core bit is 500°C.\u003c\/p\u003e\r\n\u003cp\u003eThere is no pilot drill with the diamond core bit. A low rpm rotary drill \r\nwith a planetary gearbox is required to be used with a diamond core bit. It is \r\npossible to use a cordless drill, but in the lowest gear setting. No hammer \r\naction is used.\u003c\/p\u003e\r\n\u003col\u003e\r\n\t\u003cli\u003eTightly fasten the diamond core bit in the drill's chuck.\u003c\/li\u003e\r\n\t\u003cli\u003eKeep the bit steady at a 45?ø angle \r\n\twith the starting point on the edge of the assigned area to be \r\n\tdrilled whilst the bit is rotating.\u003c\/li\u003e\r\n\t\u003cli\u003eA notch will be made (this is normal). \r\n\tGradually move the drill from 45° to 90° and continue drilling until \r\n\tfinished.\u003c\/li\u003e\r\n\t\u003cli\u003eAllow the diamond core bit to cool down completely before proceeding to \r\n\tdrill another hole.\u003c\/li\u003e\r\n\u003c\/ol\u003e\r\n\u003cp\u003eWater can be applied by:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\t\u003cli\u003espraying water on the surface,\u003c\/li\u003e\r\n\t\u003cli\u003eusing a wet sponge,\u003c\/li\u003e\r\n\t\u003cli\u003eattaching a water feed device. This is necessary when drilling into a \r\n\twall tile.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp class=\"info-products\"\u003ePlease have a look at the video in the tabs above \r\nshowing how to use the diamond core bit.\u003c\/p\u003e\r\n\u003ch4\u003eAn indication of the correct spindle speed:\u003c\/h4\u003e\r\n\u003ctable class=\"SpecsTable\" style=\"width: 100%\"\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecHeading\" style=\"width: 50%\"\u003eDIAMOND CORE BIT DIAMETER\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecHeading\" style=\"width: 50%\"\u003eSPINDLE SPEED\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??5.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e800 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??6.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e600 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??7.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e500 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??8.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e500 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003eØ10.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e400 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003eMore than Ø10.0mm (\u0026gt;10.0mm)\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003eless than 400 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\u003c\/table\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp class=\"attention-products\"\u003e\u003cstrong\u003eIMPORTANT:\u003c\/strong\u003e\u003cbr\u003e\r\nThe tool life will mostly depend on the proper usage and the hardness of the items \r\ndrilled into. It is normal for a diamond core bit to last up to 10 or more \r\ndrilled holes in hard tiles. Please remember to \u003cstrong\u003ealways\u003c\/strong\u003e use \r\nwater when drilling with diamond core bits.\u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n"}

DIAMOND CORE BIT 30MM FOR TILES

Ø30mm Diamond core bit Application: The diamond core bit is used to drill holes in: Ceramic tiles Marble Grade 5 porcelain (hardest) Granite Glass Slate...

R 233.00

{"id":9892828166,"title":"DIAMOND CORE BIT 30MM FOR TILES","handle":"diamond-core-bit-30mm-for-tiles","description":"\u003c!-- Product header --\u003e\r\n\u003cdiv id=\"tc-desc-header\"\u003e\r\n\t\u003cspan class=\"description-headingBox\"\u003eØ30mm Diamond core bit\u003c\/span\u003e\n\u003c\/div\u003e\r\n\u003ch4\u003e\r\n\u003cimg height=\"402\" src=\"http:\/\/www.vermontsales.co.za\/images\/torkcraft\/drillbits\/diamond\/tc1808_sm1.jpg\" style=\"float: right;margin-bottom:10px\" width=\"275\"\u003eApplication:\u003c\/h4\u003e\r\n\u003cp\u003eThe diamond core bit is used to drill holes in:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\t\u003cli\u003eCeramic tiles\u003c\/li\u003e\r\n\t\u003cli\u003eMarble\u003c\/li\u003e\r\n\t\u003cli\u003eGrade 5 porcelain (hardest)\u003c\/li\u003e\r\n\t\u003cli\u003eGranite\u003c\/li\u003e\r\n\t\u003cli\u003eGlass\u003c\/li\u003e\r\n\t\u003cli\u003eSlate\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003eThe diamond core cuts faster, smoother and lasts longer than any other core \r\ndrills.\u003c\/p\u003e\r\n\u003ch4\u003eHow to use the diamond core bit:\u003c\/h4\u003e\r\n\u003cp\u003eThe diamond core drill bit must be used with water at all times when \r\ndrilling. The water serves as a coolant to prevent the diamonds from \r\noverheating. The maximum allowable temperature for a diamond core bit is 500°C.\u003c\/p\u003e\r\n\u003cp\u003eThere is no pilot drill with the diamond core bit. A low rpm rotary drill \r\nwith a planetary gearbox is required to be used with a diamond core bit. It is \r\npossible to use a cordless drill, but in the lowest gear setting. No hammer \r\naction is used.\u003c\/p\u003e\r\n\u003col\u003e\r\n\t\u003cli\u003eTightly fasten the diamond core bit in the drill's chuck.\u003c\/li\u003e\r\n\t\u003cli\u003eKeep the bit steady at a 45?ø angle \r\n\twith the starting point on the edge of the assigned area to be \r\n\tdrilled whilst the bit is rotating.\u003c\/li\u003e\r\n\t\u003cli\u003eA notch will be made (this is normal). \r\n\tGradually move the drill from 45° to 90° and continue drilling until \r\n\tfinished.\u003c\/li\u003e\r\n\t\u003cli\u003eAllow the diamond core bit to cool down completely before proceeding to \r\n\tdrill another hole.\u003c\/li\u003e\r\n\u003c\/ol\u003e\r\n\u003cp\u003eWater can be applied by:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\t\u003cli\u003espraying water on the surface,\u003c\/li\u003e\r\n\t\u003cli\u003eusing a wet sponge,\u003c\/li\u003e\r\n\t\u003cli\u003eattaching a water feed device. This is necessary when drilling into a \r\n\twall tile.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp class=\"info-products\"\u003ePlease have a look at the video in the tabs above \r\nshowing how to use the diamond core bit.\u003c\/p\u003e\r\n\u003ch4\u003eAn indication of the correct spindle speed:\u003c\/h4\u003e\r\n\u003ctable class=\"SpecsTable\" style=\"width: 100%\"\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecHeading\" style=\"width: 50%\"\u003eDIAMOND CORE BIT DIAMETER\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecHeading\" style=\"width: 50%\"\u003eSPINDLE SPEED\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??5.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e800 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??6.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e600 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??7.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e500 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??8.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e500 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003eØ10.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e400 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003eMore than Ø10.0mm (\u0026gt;10.0mm)\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003eless than 400 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\u003c\/table\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp class=\"attention-products\"\u003e\u003cstrong\u003eIMPORTANT:\u003c\/strong\u003e\u003cbr\u003e\r\nThe tool life will mostly depend on the proper usage and the hardness of the items \r\ndrilled into. It is normal for a diamond core bit to last up to 10 or more \r\ndrilled holes in hard tiles. Please remember to \u003cstrong\u003ealways\u003c\/strong\u003e use \r\nwater when drilling with diamond core bits.\u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n","published_at":"2017-03-08T20:11:30-05:00","created_at":"2017-03-08T20:11:32-05:00","vendor":"TORK CRAFT","type":"Diamond Core Bit","tags":["Diamond core bit","Drill bits"],"price":23300,"price_min":23300,"price_max":23300,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":37796323718,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"TC180830","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"DIAMOND CORE BIT 30MM FOR TILES","public_title":null,"options":["Default Title"],"price":23300,"weight":66,"compare_at_price":null,"inventory_quantity":178,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/wwbits.myshopify.com\/cdn\/shop\/products\/TC180830.jpg?v=1489021893"],"featured_image":"\/\/wwbits.myshopify.com\/cdn\/shop\/products\/TC180830.jpg?v=1489021893","options":["Title"],"media":[{"alt":"DIAMOND CORE BIT 30MM FOR TILES","id":522398269475,"position":1,"preview_image":{"aspect_ratio":1.354,"height":350,"width":474,"src":"\/\/wwbits.myshopify.com\/cdn\/shop\/products\/TC180830.jpg?v=1489021893"},"aspect_ratio":1.354,"height":350,"media_type":"image","src":"\/\/wwbits.myshopify.com\/cdn\/shop\/products\/TC180830.jpg?v=1489021893","width":474}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003c!-- Product header --\u003e\r\n\u003cdiv id=\"tc-desc-header\"\u003e\r\n\t\u003cspan class=\"description-headingBox\"\u003eØ30mm Diamond core bit\u003c\/span\u003e\n\u003c\/div\u003e\r\n\u003ch4\u003e\r\n\u003cimg height=\"402\" src=\"http:\/\/www.vermontsales.co.za\/images\/torkcraft\/drillbits\/diamond\/tc1808_sm1.jpg\" style=\"float: right;margin-bottom:10px\" width=\"275\"\u003eApplication:\u003c\/h4\u003e\r\n\u003cp\u003eThe diamond core bit is used to drill holes in:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\t\u003cli\u003eCeramic tiles\u003c\/li\u003e\r\n\t\u003cli\u003eMarble\u003c\/li\u003e\r\n\t\u003cli\u003eGrade 5 porcelain (hardest)\u003c\/li\u003e\r\n\t\u003cli\u003eGranite\u003c\/li\u003e\r\n\t\u003cli\u003eGlass\u003c\/li\u003e\r\n\t\u003cli\u003eSlate\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003eThe diamond core cuts faster, smoother and lasts longer than any other core \r\ndrills.\u003c\/p\u003e\r\n\u003ch4\u003eHow to use the diamond core bit:\u003c\/h4\u003e\r\n\u003cp\u003eThe diamond core drill bit must be used with water at all times when \r\ndrilling. The water serves as a coolant to prevent the diamonds from \r\noverheating. The maximum allowable temperature for a diamond core bit is 500°C.\u003c\/p\u003e\r\n\u003cp\u003eThere is no pilot drill with the diamond core bit. A low rpm rotary drill \r\nwith a planetary gearbox is required to be used with a diamond core bit. It is \r\npossible to use a cordless drill, but in the lowest gear setting. No hammer \r\naction is used.\u003c\/p\u003e\r\n\u003col\u003e\r\n\t\u003cli\u003eTightly fasten the diamond core bit in the drill's chuck.\u003c\/li\u003e\r\n\t\u003cli\u003eKeep the bit steady at a 45?ø angle \r\n\twith the starting point on the edge of the assigned area to be \r\n\tdrilled whilst the bit is rotating.\u003c\/li\u003e\r\n\t\u003cli\u003eA notch will be made (this is normal). \r\n\tGradually move the drill from 45° to 90° and continue drilling until \r\n\tfinished.\u003c\/li\u003e\r\n\t\u003cli\u003eAllow the diamond core bit to cool down completely before proceeding to \r\n\tdrill another hole.\u003c\/li\u003e\r\n\u003c\/ol\u003e\r\n\u003cp\u003eWater can be applied by:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\t\u003cli\u003espraying water on the surface,\u003c\/li\u003e\r\n\t\u003cli\u003eusing a wet sponge,\u003c\/li\u003e\r\n\t\u003cli\u003eattaching a water feed device. This is necessary when drilling into a \r\n\twall tile.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp class=\"info-products\"\u003ePlease have a look at the video in the tabs above \r\nshowing how to use the diamond core bit.\u003c\/p\u003e\r\n\u003ch4\u003eAn indication of the correct spindle speed:\u003c\/h4\u003e\r\n\u003ctable class=\"SpecsTable\" style=\"width: 100%\"\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecHeading\" style=\"width: 50%\"\u003eDIAMOND CORE BIT DIAMETER\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecHeading\" style=\"width: 50%\"\u003eSPINDLE SPEED\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??5.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e800 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??6.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e600 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??7.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e500 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??8.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e500 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003eØ10.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e400 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003eMore than Ø10.0mm (\u0026gt;10.0mm)\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003eless than 400 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\u003c\/table\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp class=\"attention-products\"\u003e\u003cstrong\u003eIMPORTANT:\u003c\/strong\u003e\u003cbr\u003e\r\nThe tool life will mostly depend on the proper usage and the hardness of the items \r\ndrilled into. It is normal for a diamond core bit to last up to 10 or more \r\ndrilled holes in hard tiles. Please remember to \u003cstrong\u003ealways\u003c\/strong\u003e use \r\nwater when drilling with diamond core bits.\u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n"}

Filter

Diamond Core Bit

Encourage the users to leave their E-mails.

Encourage the users to leave
their E-mails.