POLISHING BONNET WOOL VELCRO CONCAVE 180MM 7'

POLISHING BONNET WOOL VELCRO CONCAVE 180MM 7'

Velcro polishing wool buff Diameter: Ø180mm Use backing pad: SPC00119  Application: The polishing wool buff should be used with an automotive polisher. Different polishes and...

Brand :TORK CRAFT

Type :Vel

Code :

Availability :

R 188.89
Velcro polishing wool buff

Diameter: Ø180mm
Use backing pad: SPC00119

 Application:

The polishing wool buff should be used with an automotive polisher. Different polishes and waxes can be used with the buff. The buff is fastened onto a rubber backing pad with velcro. Make sure the diameter of the polishing buff is the same as the backing pad's diameter.

It is necessary to polish a vehicle body panel when:

  • The panel has been newly painted with a clear-coat.
  • Shallow scratch marks need to be removed.
  • The panel has suffered from oxidation.
  • Swirl marks and hologram defects need to be removed.

TIP:
The buff is washable after use if the polishing compound is soluble.

Velcro polishing wool buff range:

ORDER NO. DIAMETER USE BACKING PAD
SPC00123 ??125mm SPC00120
SPC00125 ??180mm SPC00119

Recommended polishing compounds to use:

  • Liquid Shine™ High cut - Features a silicone, wax and filler free polishing compound to give a high gloss finish on fresh or cured paint. It is capable of removing P1500 grit sanding marks. It can be used on automotive paints, marine gel-coats and on composite surfaces.
  • Liquid Shine™ Fine cut - similar to the High cut polishing compound, but it is designed for use on a ceramic and scratch resistant clear-coat. It is capable of removing P2000 scratch marks.
  • Liquid Shine™ Zero swirl - Very low abrasive for the final step of polishing. Removes holograms and swirl marks. Use a soft compounding sponge as a final step