Diameter: Ø50mm
Mandrel to use: TC17007-3
Working length: 38mm

Application:

The hole saw is made from a tough steel body covered in a chrome finish. The cutting edge is covered with a permanently bonded electro plated diamond grit coating.

The diamond grit hole saw can be used to cut:

• Bricks
• Roof tiles
• Slate
• Ceramics
• Tiles
• Marble/Granite
• Reinforced plastics
• Glass resins
• Asbestos

IMPORTANT:
Do not use the diamond grit hole saw with percussion (hammer action). Allow the diamond coating to cut the material with minimum pressure. Rotation speed should not exceed 300 rpm.

TIP:
Regularly (every 1 to 2 minutes of use) rinse and cool the diamond grit holesaw in a container of water. This will extend the life of the hole saw. The maximum permissible temperature of a diamond tip is 500°C.