DIAMOND CORE BIT 19MM FOR TILES
Ø19mm Diamond core bit
Application:
The diamond core bit is used to drill holes in:
- Ceramic tiles
- Marble
- Grade 5 porcelain (hardest)
- Granite
- Glass
- Slate
The diamond core cuts faster, smoother and lasts longer than any other core drills.
How to use the diamond core bit:
The diamond core drill bit must be used with water at all times when drilling. The water serves as a coolant to prevent the diamonds from overheating. The maximum allowable temperature for a diamond core bit is 500°C.
There is no pilot drill with the diamond core bit. A low rpm rotary drill with a planetary gearbox is required to be used with a diamond core bit. It is possible to use a cordless drill, but in the lowest gear setting. No hammer action is used.
- Tightly fasten the diamond core bit in the drill's chuck.
- Keep the bit steady at a 45?ø angle with the starting point on the edge of the assigned area to be drilled whilst the bit is rotating.
- A notch will be made (this is normal). Gradually move the drill from 45° to 90° and continue drilling until finished.
- Allow the diamond core bit to cool down completely before proceeding to drill another hole.
Water can be applied by:
- spraying water on the surface,
- using a wet sponge,
- attaching a water feed device. This is necessary when drilling into a wall tile.
Please have a look at the video in the tabs above showing how to use the diamond core bit.
An indication of the correct spindle speed:
| DIAMOND CORE BIT DIAMETER | SPINDLE SPEED |
| ??5.0mm | 800 rpm |
| ??6.0mm | 600 rpm |
| ??7.0mm | 500 rpm |
| ??8.0mm | 500 rpm |
| Ø10.0mm | 400 rpm |
| More than Ø10.0mm (>10.0mm) | less than 400 rpm |
IMPORTANT:
The tool life will mostly depend on the proper usage and the hardness of the items
drilled into. It is normal for a diamond core bit to last up to 10 or more
drilled holes in hard tiles. Please remember to always use
water when drilling with diamond core bits.
Related Product
DIAMOND CORE BIT 98MM FOR TILES HEX SHANK
R 772.16
{"id":9892831366,"title":"DIAMOND CORE BIT 98MM FOR TILES HEX SHANK","handle":"diamond-core-bit-98mm-for-tiles-hex-shank","description":"\u003cp\u003eDIAMOND CORE BIT 98MM FOR TILES HEX SHANK\u003c\/p\u003e","published_at":"2017-03-08T20:11:58-05:00","created_at":"2017-03-08T20:12:00-05:00","vendor":"TORK CRAFT","type":"Diamond Core Bit","tags":[],"price":77216,"price_min":77216,"price_max":77216,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":37796391814,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"TC180898","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"DIAMOND CORE BIT 98MM FOR TILES HEX SHANK","public_title":null,"options":["Default Title"],"price":77216,"weight":289,"compare_at_price":null,"inventory_quantity":71,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/wwbits.myshopify.com\/cdn\/shop\/products\/TC180898.jpg?v=1489021920"],"featured_image":"\/\/wwbits.myshopify.com\/cdn\/shop\/products\/TC180898.jpg?v=1489021920","options":["Title"],"media":[{"alt":"DIAMOND CORE BIT 98MM FOR TILES HEX SHANK","id":522398564387,"position":1,"preview_image":{"aspect_ratio":1.056,"height":450,"width":475,"src":"\/\/wwbits.myshopify.com\/cdn\/shop\/products\/TC180898.jpg?v=1489021920"},"aspect_ratio":1.056,"height":450,"media_type":"image","src":"\/\/wwbits.myshopify.com\/cdn\/shop\/products\/TC180898.jpg?v=1489021920","width":475}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eDIAMOND CORE BIT 98MM FOR TILES HEX SHANK\u003c\/p\u003e"}
DIAMOND CORE BIT 8MM FOR TILES
R 74.40
{"id":9892822406,"title":"DIAMOND CORE BIT 8MM FOR TILES","handle":"diamond-core-bit-8mm-for-tiles","description":"\u003c!-- Product header --\u003e\r\n\u003cdiv id=\"tc-desc-header\"\u003e\r\n\t\u003cspan class=\"description-headingBox\"\u003eØ8mm Diamond core bit\u003c\/span\u003e\n\u003c\/div\u003e\r\n\u003ch4\u003e\r\n\u003cimg height=\"402\" src=\"http:\/\/www.vermontsales.co.za\/images\/torkcraft\/drillbits\/diamond\/tc1808_sm1.jpg\" style=\"float: right;margin-bottom:10px\" width=\"275\"\u003eApplication:\u003c\/h4\u003e\r\n\u003cp\u003eThe diamond core bit is used to drill holes in:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\t\u003cli\u003eCeramic tiles\u003c\/li\u003e\r\n\t\u003cli\u003eMarble\u003c\/li\u003e\r\n\t\u003cli\u003eGrade 5 porcelain (hardest)\u003c\/li\u003e\r\n\t\u003cli\u003eGranite\u003c\/li\u003e\r\n\t\u003cli\u003eGlass\u003c\/li\u003e\r\n\t\u003cli\u003eSlate\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003eThe diamond core cuts faster, smoother and lasts longer than any other core \r\ndrills.\u003c\/p\u003e\r\n\u003ch4\u003eHow to use the diamond core bit:\u003c\/h4\u003e\r\n\u003cp\u003eThe diamond core drill bit must be used with water at all times when \r\ndrilling. The water serves as a coolant to prevent the diamonds from \r\noverheating. The maximum allowable temperature for a diamond core bit is 500°C.\u003c\/p\u003e\r\n\u003cp\u003eThere is no pilot drill with the diamond core bit. A low rpm rotary drill \r\nwith a planetary gearbox is required to be used with a diamond core bit. It is \r\npossible to use a cordless drill, but in the lowest gear setting. No hammer \r\naction is used.\u003c\/p\u003e\r\n\u003col\u003e\r\n\t\u003cli\u003eTightly fasten the diamond core bit in the drill's chuck.\u003c\/li\u003e\r\n\t\u003cli\u003eKeep the bit steady at a 45?ø angle \r\n\twith the starting point on the edge of the assigned area to be \r\n\tdrilled whilst the bit is rotating.\u003c\/li\u003e\r\n\t\u003cli\u003eA notch will be made (this is normal). \r\n\tGradually move the drill from 45° to 90° and continue drilling until \r\n\tfinished.\u003c\/li\u003e\r\n\t\u003cli\u003eAllow the diamond core bit to cool down completely before proceeding to \r\n\tdrill another hole.\u003c\/li\u003e\r\n\u003c\/ol\u003e\r\n\u003cp\u003eWater can be applied by:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\t\u003cli\u003espraying water on the surface,\u003c\/li\u003e\r\n\t\u003cli\u003eusing a wet sponge,\u003c\/li\u003e\r\n\t\u003cli\u003eattaching a water feed device. This is necessary when drilling into a \r\n\twall tile.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp class=\"info-products\"\u003ePlease have a look at the video in the tabs above \r\nshowing how to use the diamond core bit.\u003c\/p\u003e\r\n\u003ch4\u003eAn indication of the correct spindle speed:\u003c\/h4\u003e\r\n\u003ctable class=\"SpecsTable\" style=\"width: 100%\"\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecHeading\" style=\"width: 50%\"\u003eDIAMOND CORE BIT DIAMETER\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecHeading\" style=\"width: 50%\"\u003eSPINDLE SPEED\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??5.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e800 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??6.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e600 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??7.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e500 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??8.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e500 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003eØ10.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e400 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003eMore than Ø10.0mm (\u0026gt;10.0mm)\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003eless than 400 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\u003c\/table\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp class=\"attention-products\"\u003e\u003cstrong\u003eIMPORTANT:\u003c\/strong\u003e\u003cbr\u003e\r\nThe tool life will mostly depend on the proper usage and the hardness of the items \r\ndrilled into. It is normal for a diamond core bit to last up to 10 or more \r\ndrilled holes in hard tiles. Please remember to \u003cstrong\u003ealways\u003c\/strong\u003e use \r\nwater when drilling with diamond core bits.\u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n","published_at":"2017-03-08T20:10:58-05:00","created_at":"2017-03-08T20:10:59-05:00","vendor":"TORK CRAFT","type":"Diamond Core Bit","tags":["Diamond core bit","Drill bits"],"price":7440,"price_min":7440,"price_max":7440,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":37796257734,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"TC180808","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"DIAMOND CORE BIT 8MM FOR TILES","public_title":null,"options":["Default Title"],"price":7440,"weight":21,"compare_at_price":null,"inventory_quantity":1083,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/wwbits.myshopify.com\/cdn\/shop\/products\/TC180808.jpg?v=1489021859"],"featured_image":"\/\/wwbits.myshopify.com\/cdn\/shop\/products\/TC180808.jpg?v=1489021859","options":["Title"],"media":[{"alt":"DIAMOND CORE BIT 8MM FOR TILES","id":522397876259,"position":1,"preview_image":{"aspect_ratio":0.949,"height":350,"width":332,"src":"\/\/wwbits.myshopify.com\/cdn\/shop\/products\/TC180808.jpg?v=1489021859"},"aspect_ratio":0.949,"height":350,"media_type":"image","src":"\/\/wwbits.myshopify.com\/cdn\/shop\/products\/TC180808.jpg?v=1489021859","width":332}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003c!-- Product header --\u003e\r\n\u003cdiv id=\"tc-desc-header\"\u003e\r\n\t\u003cspan class=\"description-headingBox\"\u003eØ8mm Diamond core bit\u003c\/span\u003e\n\u003c\/div\u003e\r\n\u003ch4\u003e\r\n\u003cimg height=\"402\" src=\"http:\/\/www.vermontsales.co.za\/images\/torkcraft\/drillbits\/diamond\/tc1808_sm1.jpg\" style=\"float: right;margin-bottom:10px\" width=\"275\"\u003eApplication:\u003c\/h4\u003e\r\n\u003cp\u003eThe diamond core bit is used to drill holes in:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\t\u003cli\u003eCeramic tiles\u003c\/li\u003e\r\n\t\u003cli\u003eMarble\u003c\/li\u003e\r\n\t\u003cli\u003eGrade 5 porcelain (hardest)\u003c\/li\u003e\r\n\t\u003cli\u003eGranite\u003c\/li\u003e\r\n\t\u003cli\u003eGlass\u003c\/li\u003e\r\n\t\u003cli\u003eSlate\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003eThe diamond core cuts faster, smoother and lasts longer than any other core \r\ndrills.\u003c\/p\u003e\r\n\u003ch4\u003eHow to use the diamond core bit:\u003c\/h4\u003e\r\n\u003cp\u003eThe diamond core drill bit must be used with water at all times when \r\ndrilling. The water serves as a coolant to prevent the diamonds from \r\noverheating. The maximum allowable temperature for a diamond core bit is 500°C.\u003c\/p\u003e\r\n\u003cp\u003eThere is no pilot drill with the diamond core bit. A low rpm rotary drill \r\nwith a planetary gearbox is required to be used with a diamond core bit. It is \r\npossible to use a cordless drill, but in the lowest gear setting. No hammer \r\naction is used.\u003c\/p\u003e\r\n\u003col\u003e\r\n\t\u003cli\u003eTightly fasten the diamond core bit in the drill's chuck.\u003c\/li\u003e\r\n\t\u003cli\u003eKeep the bit steady at a 45?ø angle \r\n\twith the starting point on the edge of the assigned area to be \r\n\tdrilled whilst the bit is rotating.\u003c\/li\u003e\r\n\t\u003cli\u003eA notch will be made (this is normal). \r\n\tGradually move the drill from 45° to 90° and continue drilling until \r\n\tfinished.\u003c\/li\u003e\r\n\t\u003cli\u003eAllow the diamond core bit to cool down completely before proceeding to \r\n\tdrill another hole.\u003c\/li\u003e\r\n\u003c\/ol\u003e\r\n\u003cp\u003eWater can be applied by:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\t\u003cli\u003espraying water on the surface,\u003c\/li\u003e\r\n\t\u003cli\u003eusing a wet sponge,\u003c\/li\u003e\r\n\t\u003cli\u003eattaching a water feed device. This is necessary when drilling into a \r\n\twall tile.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp class=\"info-products\"\u003ePlease have a look at the video in the tabs above \r\nshowing how to use the diamond core bit.\u003c\/p\u003e\r\n\u003ch4\u003eAn indication of the correct spindle speed:\u003c\/h4\u003e\r\n\u003ctable class=\"SpecsTable\" style=\"width: 100%\"\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecHeading\" style=\"width: 50%\"\u003eDIAMOND CORE BIT DIAMETER\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecHeading\" style=\"width: 50%\"\u003eSPINDLE SPEED\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??5.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e800 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??6.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e600 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??7.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e500 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??8.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e500 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003eØ10.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e400 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003eMore than Ø10.0mm (\u0026gt;10.0mm)\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003eless than 400 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\u003c\/table\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp class=\"attention-products\"\u003e\u003cstrong\u003eIMPORTANT:\u003c\/strong\u003e\u003cbr\u003e\r\nThe tool life will mostly depend on the proper usage and the hardness of the items \r\ndrilled into. It is normal for a diamond core bit to last up to 10 or more \r\ndrilled holes in hard tiles. Please remember to \u003cstrong\u003ealways\u003c\/strong\u003e use \r\nwater when drilling with diamond core bits.\u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n"}
DIAMOND CORE BIT 8MM FOR HARD TILES AND PORCELAIN
R 445.63
{"id":9887175366,"title":"DIAMOND CORE BIT 8MM FOR HARD TILES AND PORCELAIN","handle":"diamond-core-bit-8mm-for-hard-tiles-and-porcelain","description":"\u003c!-- Product header --\u003e\r\n\u003cdiv id=\"tc-desc-header\"\u003e\r\n\t\u003cspan class=\"description-headingBox\"\u003eØ8mm Diamond core bit\u003c\/span\u003e\n\u003c\/div\u003e\r\n\u003ch4\u003e\r\n\u003cimg alt=\"\" height=\"175\" src=\"http:\/\/www.vermontsales.co.za\/images\/torkcraft\/drillbits\/diamond\/dcb_sm1.jpg\" style=\"float: right\" width=\"275\"\u003eApplication:\u003c\/h4\u003e\r\n\u003cp\u003eThe diamond core bit is used to drill holes in:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\t\u003cli\u003eCeramic tiles\u003c\/li\u003e\r\n\t\u003cli\u003eMarble\u003c\/li\u003e\r\n\t\u003cli\u003eGrade 5 porcelain (hardest)\u003c\/li\u003e\r\n\t\u003cli\u003eGranite\u003c\/li\u003e\r\n\t\u003cli\u003eGlass\u003c\/li\u003e\r\n\t\u003cli\u003eSlate\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003eThe diamond core cuts faster, smoother and lasts longer than any other core \r\ndrills.\u003c\/p\u003e\r\n\u003ch4\u003eHow to use the diamond core bit:\u003c\/h4\u003e\r\n\u003cp\u003eThe diamond core drill bit must be used with water at all times when \r\ndrilling. The water serves as a coolant to prevent the diamonds from \r\noverheating. The maximum allowable temperature for a diamond core bit is 500°C.\u003c\/p\u003e\r\n\u003cp\u003eThere is no pilot drill with the diamond core bit. A low rpm rotary drill \r\nwith a planetary gearbox is required to be used with a diamond core bit. It is \r\npossible to use a cordless drill, but in the lowest gear setting. No hammer \r\naction is used.\u003c\/p\u003e\r\n\u003col\u003e\r\n\t\u003cli\u003eTightly fasten the diamond core bit in the drill's chuck.\u003c\/li\u003e\r\n\t\u003cli\u003eKeep the bit steady at a 45?ø angle \r\n\twith the starting point on the edge of the assigned area to be \r\n\tdrilled whilst the bit is rotating.\u003c\/li\u003e\r\n\t\u003cli\u003eA notch will be made (this is normal). \r\n\tGradually move the drill from 45° to 90° and continue drilling until \r\n\tfinished.\u003c\/li\u003e\r\n\t\u003cli\u003eAllow the diamond core bit to cool down completely before proceeding to \r\n\tdrill another hole.\u003c\/li\u003e\r\n\u003c\/ol\u003e\r\n\u003cp\u003eWater can be applied by:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\t\u003cli\u003espraying water on the surface,\u003c\/li\u003e\r\n\t\u003cli\u003eusing a wet sponge,\u003c\/li\u003e\r\n\t\u003cli\u003eattaching a water feed device. This is necessary when drilling into a \r\n\twall tile.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp class=\"info-products\"\u003ePlease have a look at the video in the tabs above \r\nshowing how to use the diamond core bit.\u003c\/p\u003e\r\n\u003ch4\u003eAn indication of the correct spindle speed:\u003c\/h4\u003e\r\n\u003ctable class=\"SpecsTable\" style=\"width: 100%\"\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecHeading\" style=\"width: 50%\"\u003eDIAMOND CORE BIT DIAMETER\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecHeading\" style=\"width: 50%\"\u003eSPINDLE SPEED\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??5.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e800 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??6.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e600 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??7.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e500 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??8.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e500 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003eØ10.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e400 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003eMore than Ø10.0mm (\u0026gt;10.0mm)\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003eless than 400 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\u003c\/table\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp class=\"attention-products\"\u003e\u003cstrong\u003eIMPORTANT:\u003c\/strong\u003e\u003cbr\u003e\r\nThe tool life will mostly depend on the proper usage and the hardness of the items \r\ndrilled into. It is normal for a diamond core bit to last up to 10 or more \r\ndrilled holes in hard tiles. Please remember to \u003cstrong\u003ealways\u003c\/strong\u003e use \r\nwater when drilling with diamond core bits.\u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n","published_at":"2017-03-08T08:49:45-05:00","created_at":"2017-03-08T08:49:48-05:00","vendor":"TORK CRAFT","type":"Diamond Core Bit","tags":["Diamond core bit","Drill bits"],"price":44563,"price_min":44563,"price_max":44563,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":37695358214,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"DCB008","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"DIAMOND CORE BIT 8MM FOR HARD TILES AND PORCELAIN","public_title":null,"options":["Default Title"],"price":44563,"weight":25,"compare_at_price":null,"inventory_quantity":128,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/wwbits.myshopify.com\/cdn\/shop\/products\/DCB008.jpg?v=1488980989"],"featured_image":"\/\/wwbits.myshopify.com\/cdn\/shop\/products\/DCB008.jpg?v=1488980989","options":["Title"],"media":[{"alt":"DIAMOND CORE BIT 8MM FOR HARD TILES AND PORCELAIN","id":521356541987,"position":1,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/wwbits.myshopify.com\/cdn\/shop\/products\/DCB008.jpg?v=1488980989"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/wwbits.myshopify.com\/cdn\/shop\/products\/DCB008.jpg?v=1488980989","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003c!-- Product header --\u003e\r\n\u003cdiv id=\"tc-desc-header\"\u003e\r\n\t\u003cspan class=\"description-headingBox\"\u003eØ8mm Diamond core bit\u003c\/span\u003e\n\u003c\/div\u003e\r\n\u003ch4\u003e\r\n\u003cimg alt=\"\" height=\"175\" src=\"http:\/\/www.vermontsales.co.za\/images\/torkcraft\/drillbits\/diamond\/dcb_sm1.jpg\" style=\"float: right\" width=\"275\"\u003eApplication:\u003c\/h4\u003e\r\n\u003cp\u003eThe diamond core bit is used to drill holes in:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\t\u003cli\u003eCeramic tiles\u003c\/li\u003e\r\n\t\u003cli\u003eMarble\u003c\/li\u003e\r\n\t\u003cli\u003eGrade 5 porcelain (hardest)\u003c\/li\u003e\r\n\t\u003cli\u003eGranite\u003c\/li\u003e\r\n\t\u003cli\u003eGlass\u003c\/li\u003e\r\n\t\u003cli\u003eSlate\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003eThe diamond core cuts faster, smoother and lasts longer than any other core \r\ndrills.\u003c\/p\u003e\r\n\u003ch4\u003eHow to use the diamond core bit:\u003c\/h4\u003e\r\n\u003cp\u003eThe diamond core drill bit must be used with water at all times when \r\ndrilling. The water serves as a coolant to prevent the diamonds from \r\noverheating. The maximum allowable temperature for a diamond core bit is 500°C.\u003c\/p\u003e\r\n\u003cp\u003eThere is no pilot drill with the diamond core bit. A low rpm rotary drill \r\nwith a planetary gearbox is required to be used with a diamond core bit. It is \r\npossible to use a cordless drill, but in the lowest gear setting. No hammer \r\naction is used.\u003c\/p\u003e\r\n\u003col\u003e\r\n\t\u003cli\u003eTightly fasten the diamond core bit in the drill's chuck.\u003c\/li\u003e\r\n\t\u003cli\u003eKeep the bit steady at a 45?ø angle \r\n\twith the starting point on the edge of the assigned area to be \r\n\tdrilled whilst the bit is rotating.\u003c\/li\u003e\r\n\t\u003cli\u003eA notch will be made (this is normal). \r\n\tGradually move the drill from 45° to 90° and continue drilling until \r\n\tfinished.\u003c\/li\u003e\r\n\t\u003cli\u003eAllow the diamond core bit to cool down completely before proceeding to \r\n\tdrill another hole.\u003c\/li\u003e\r\n\u003c\/ol\u003e\r\n\u003cp\u003eWater can be applied by:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\t\u003cli\u003espraying water on the surface,\u003c\/li\u003e\r\n\t\u003cli\u003eusing a wet sponge,\u003c\/li\u003e\r\n\t\u003cli\u003eattaching a water feed device. This is necessary when drilling into a \r\n\twall tile.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp class=\"info-products\"\u003ePlease have a look at the video in the tabs above \r\nshowing how to use the diamond core bit.\u003c\/p\u003e\r\n\u003ch4\u003eAn indication of the correct spindle speed:\u003c\/h4\u003e\r\n\u003ctable class=\"SpecsTable\" style=\"width: 100%\"\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecHeading\" style=\"width: 50%\"\u003eDIAMOND CORE BIT DIAMETER\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecHeading\" style=\"width: 50%\"\u003eSPINDLE SPEED\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??5.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e800 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??6.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e600 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??7.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e500 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??8.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e500 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003eØ10.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e400 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003eMore than Ø10.0mm (\u0026gt;10.0mm)\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003eless than 400 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\u003c\/table\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp class=\"attention-products\"\u003e\u003cstrong\u003eIMPORTANT:\u003c\/strong\u003e\u003cbr\u003e\r\nThe tool life will mostly depend on the proper usage and the hardness of the items \r\ndrilled into. It is normal for a diamond core bit to last up to 10 or more \r\ndrilled holes in hard tiles. Please remember to \u003cstrong\u003ealways\u003c\/strong\u003e use \r\nwater when drilling with diamond core bits.\u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n"}
DIAMOND CORE BIT 76MM FOR TILES HEX SHANK
R 583.87
{"id":9892831046,"title":"DIAMOND CORE BIT 76MM FOR TILES HEX SHANK","handle":"diamond-core-bit-76mm-for-tiles-hex-shank","description":"\u003cp\u003eDIAMOND CORE BIT 76MM FOR TILES HEX SHANK\u003c\/p\u003e","published_at":"2017-03-08T20:11:56-05:00","created_at":"2017-03-08T20:11:58-05:00","vendor":"TORK CRAFT","type":"Diamond Core Bit","tags":[],"price":58387,"price_min":58387,"price_max":58387,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":37796386438,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"TC180876","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"DIAMOND CORE BIT 76MM FOR TILES HEX SHANK","public_title":null,"options":["Default Title"],"price":58387,"weight":270,"compare_at_price":null,"inventory_quantity":155,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/wwbits.myshopify.com\/cdn\/shop\/products\/TC180876.jpg?v=1489021918"],"featured_image":"\/\/wwbits.myshopify.com\/cdn\/shop\/products\/TC180876.jpg?v=1489021918","options":["Title"],"media":[{"alt":"DIAMOND CORE BIT 76MM FOR TILES HEX SHANK","id":522398531619,"position":1,"preview_image":{"aspect_ratio":0.98,"height":350,"width":343,"src":"\/\/wwbits.myshopify.com\/cdn\/shop\/products\/TC180876.jpg?v=1489021918"},"aspect_ratio":0.98,"height":350,"media_type":"image","src":"\/\/wwbits.myshopify.com\/cdn\/shop\/products\/TC180876.jpg?v=1489021918","width":343}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eDIAMOND CORE BIT 76MM FOR TILES HEX SHANK\u003c\/p\u003e"}
DIAMOND CORE BIT 70MM FOR TILES HEX SHANK
R 540.09
{"id":9892830662,"title":"DIAMOND CORE BIT 70MM FOR TILES HEX SHANK","handle":"diamond-core-bit-70mm-for-tiles-hex-shank","description":"\u003cp\u003eDIAMOND CORE BIT 70MM FOR TILES HEX SHANK\u003c\/p\u003e","published_at":"2017-03-08T20:11:53-05:00","created_at":"2017-03-08T20:11:55-05:00","vendor":"TORK CRAFT","type":"Diamond Core Bit","tags":[],"price":54009,"price_min":54009,"price_max":54009,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":37796376198,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"TC180870","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"DIAMOND CORE BIT 70MM FOR TILES HEX SHANK","public_title":null,"options":["Default Title"],"price":54009,"weight":190,"compare_at_price":null,"inventory_quantity":162,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/wwbits.myshopify.com\/cdn\/shop\/products\/TC180870.jpg?v=1489021915"],"featured_image":"\/\/wwbits.myshopify.com\/cdn\/shop\/products\/TC180870.jpg?v=1489021915","options":["Title"],"media":[{"alt":"DIAMOND CORE BIT 70MM FOR TILES HEX SHANK","id":522398498851,"position":1,"preview_image":{"aspect_ratio":0.98,"height":350,"width":343,"src":"\/\/wwbits.myshopify.com\/cdn\/shop\/products\/TC180870.jpg?v=1489021915"},"aspect_ratio":0.98,"height":350,"media_type":"image","src":"\/\/wwbits.myshopify.com\/cdn\/shop\/products\/TC180870.jpg?v=1489021915","width":343}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eDIAMOND CORE BIT 70MM FOR TILES HEX SHANK\u003c\/p\u003e"}
DIAMOND CORE BIT 6MM FOR TILES
R 57.25
{"id":9892822278,"title":"DIAMOND CORE BIT 6MM FOR TILES","handle":"diamond-core-bit-6mm-for-tiles","description":"\u003c!-- Product header --\u003e\r\n\u003cdiv id=\"tc-desc-header\"\u003e\r\n\t\u003cspan class=\"description-headingBox\"\u003eØ6mm Diamond core bit\u003c\/span\u003e\n\u003c\/div\u003e\r\n\u003ch4\u003e\r\n\u003cimg height=\"402\" src=\"http:\/\/www.vermontsales.co.za\/images\/torkcraft\/drillbits\/diamond\/tc1808_sm1.jpg\" style=\"float: right;margin-bottom:10px\" width=\"275\"\u003eApplication:\u003c\/h4\u003e\r\n\u003cp\u003eThe diamond core bit is used to drill holes in:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\t\u003cli\u003eCeramic tiles\u003c\/li\u003e\r\n\t\u003cli\u003eMarble\u003c\/li\u003e\r\n\t\u003cli\u003eGrade 5 porcelain (hardest)\u003c\/li\u003e\r\n\t\u003cli\u003eGranite\u003c\/li\u003e\r\n\t\u003cli\u003eGlass\u003c\/li\u003e\r\n\t\u003cli\u003eSlate\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003eThe diamond core cuts faster, smoother and lasts longer than any other core \r\ndrills.\u003c\/p\u003e\r\n\u003ch4\u003eHow to use the diamond core bit:\u003c\/h4\u003e\r\n\u003cp\u003eThe diamond core drill bit must be used with water at all times when \r\ndrilling. The water serves as a coolant to prevent the diamonds from \r\noverheating. The maximum allowable temperature for a diamond core bit is 500°C.\u003c\/p\u003e\r\n\u003cp\u003eThere is no pilot drill with the diamond core bit. A low rpm rotary drill \r\nwith a planetary gearbox is required to be used with a diamond core bit. It is \r\npossible to use a cordless drill, but in the lowest gear setting. No hammer \r\naction is used.\u003c\/p\u003e\r\n\u003col\u003e\r\n\t\u003cli\u003eTightly fasten the diamond core bit in the drill's chuck.\u003c\/li\u003e\r\n\t\u003cli\u003eKeep the bit steady at a 45?ø angle \r\n\twith the starting point on the edge of the assigned area to be \r\n\tdrilled whilst the bit is rotating.\u003c\/li\u003e\r\n\t\u003cli\u003eA notch will be made (this is normal). \r\n\tGradually move the drill from 45° to 90° and continue drilling until \r\n\tfinished.\u003c\/li\u003e\r\n\t\u003cli\u003eAllow the diamond core bit to cool down completely before proceeding to \r\n\tdrill another hole.\u003c\/li\u003e\r\n\u003c\/ol\u003e\r\n\u003cp\u003eWater can be applied by:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\t\u003cli\u003espraying water on the surface,\u003c\/li\u003e\r\n\t\u003cli\u003eusing a wet sponge,\u003c\/li\u003e\r\n\t\u003cli\u003eattaching a water feed device. This is necessary when drilling into a \r\n\twall tile.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp class=\"info-products\"\u003ePlease have a look at the video in the tabs above \r\nshowing how to use the diamond core bit.\u003c\/p\u003e\r\n\u003ch4\u003eAn indication of the correct spindle speed:\u003c\/h4\u003e\r\n\u003ctable class=\"SpecsTable\" style=\"width: 100%\"\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecHeading\" style=\"width: 50%\"\u003eDIAMOND CORE BIT DIAMETER\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecHeading\" style=\"width: 50%\"\u003eSPINDLE SPEED\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??5.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e800 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??6.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e600 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??7.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e500 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??8.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e500 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003eØ10.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e400 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003eMore than Ø10.0mm (\u0026gt;10.0mm)\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003eless than 400 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\u003c\/table\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp class=\"attention-products\"\u003e\u003cstrong\u003eIMPORTANT:\u003c\/strong\u003e\u003cbr\u003e\r\nThe tool life will mostly depend on the proper usage and the hardness of the items \r\ndrilled into. It is normal for a diamond core bit to last up to 10 or more \r\ndrilled holes in hard tiles. Please remember to \u003cstrong\u003ealways\u003c\/strong\u003e use \r\nwater when drilling with diamond core bits.\u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n","published_at":"2017-03-08T20:10:56-05:00","created_at":"2017-03-08T20:10:57-05:00","vendor":"TORK CRAFT","type":"Diamond Core Bit","tags":["Diamond core bit","Drill bits"],"price":5725,"price_min":5725,"price_max":5725,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":37796257478,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"TC180806","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"DIAMOND CORE BIT 6MM FOR TILES","public_title":null,"options":["Default Title"],"price":5725,"weight":19,"compare_at_price":null,"inventory_quantity":2828,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/wwbits.myshopify.com\/cdn\/shop\/products\/TC180806.jpg?v=1489021857"],"featured_image":"\/\/wwbits.myshopify.com\/cdn\/shop\/products\/TC180806.jpg?v=1489021857","options":["Title"],"media":[{"alt":"DIAMOND CORE BIT 6MM FOR TILES","id":522397843491,"position":1,"preview_image":{"aspect_ratio":0.963,"height":350,"width":337,"src":"\/\/wwbits.myshopify.com\/cdn\/shop\/products\/TC180806.jpg?v=1489021857"},"aspect_ratio":0.963,"height":350,"media_type":"image","src":"\/\/wwbits.myshopify.com\/cdn\/shop\/products\/TC180806.jpg?v=1489021857","width":337}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003c!-- Product header --\u003e\r\n\u003cdiv id=\"tc-desc-header\"\u003e\r\n\t\u003cspan class=\"description-headingBox\"\u003eØ6mm Diamond core bit\u003c\/span\u003e\n\u003c\/div\u003e\r\n\u003ch4\u003e\r\n\u003cimg height=\"402\" src=\"http:\/\/www.vermontsales.co.za\/images\/torkcraft\/drillbits\/diamond\/tc1808_sm1.jpg\" style=\"float: right;margin-bottom:10px\" width=\"275\"\u003eApplication:\u003c\/h4\u003e\r\n\u003cp\u003eThe diamond core bit is used to drill holes in:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\t\u003cli\u003eCeramic tiles\u003c\/li\u003e\r\n\t\u003cli\u003eMarble\u003c\/li\u003e\r\n\t\u003cli\u003eGrade 5 porcelain (hardest)\u003c\/li\u003e\r\n\t\u003cli\u003eGranite\u003c\/li\u003e\r\n\t\u003cli\u003eGlass\u003c\/li\u003e\r\n\t\u003cli\u003eSlate\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003eThe diamond core cuts faster, smoother and lasts longer than any other core \r\ndrills.\u003c\/p\u003e\r\n\u003ch4\u003eHow to use the diamond core bit:\u003c\/h4\u003e\r\n\u003cp\u003eThe diamond core drill bit must be used with water at all times when \r\ndrilling. The water serves as a coolant to prevent the diamonds from \r\noverheating. The maximum allowable temperature for a diamond core bit is 500°C.\u003c\/p\u003e\r\n\u003cp\u003eThere is no pilot drill with the diamond core bit. A low rpm rotary drill \r\nwith a planetary gearbox is required to be used with a diamond core bit. It is \r\npossible to use a cordless drill, but in the lowest gear setting. No hammer \r\naction is used.\u003c\/p\u003e\r\n\u003col\u003e\r\n\t\u003cli\u003eTightly fasten the diamond core bit in the drill's chuck.\u003c\/li\u003e\r\n\t\u003cli\u003eKeep the bit steady at a 45?ø angle \r\n\twith the starting point on the edge of the assigned area to be \r\n\tdrilled whilst the bit is rotating.\u003c\/li\u003e\r\n\t\u003cli\u003eA notch will be made (this is normal). \r\n\tGradually move the drill from 45° to 90° and continue drilling until \r\n\tfinished.\u003c\/li\u003e\r\n\t\u003cli\u003eAllow the diamond core bit to cool down completely before proceeding to \r\n\tdrill another hole.\u003c\/li\u003e\r\n\u003c\/ol\u003e\r\n\u003cp\u003eWater can be applied by:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\t\u003cli\u003espraying water on the surface,\u003c\/li\u003e\r\n\t\u003cli\u003eusing a wet sponge,\u003c\/li\u003e\r\n\t\u003cli\u003eattaching a water feed device. This is necessary when drilling into a \r\n\twall tile.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp class=\"info-products\"\u003ePlease have a look at the video in the tabs above \r\nshowing how to use the diamond core bit.\u003c\/p\u003e\r\n\u003ch4\u003eAn indication of the correct spindle speed:\u003c\/h4\u003e\r\n\u003ctable class=\"SpecsTable\" style=\"width: 100%\"\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecHeading\" style=\"width: 50%\"\u003eDIAMOND CORE BIT DIAMETER\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecHeading\" style=\"width: 50%\"\u003eSPINDLE SPEED\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??5.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e800 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??6.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e600 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??7.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e500 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??8.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e500 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003eØ10.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e400 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003eMore than Ø10.0mm (\u0026gt;10.0mm)\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003eless than 400 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\u003c\/table\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp class=\"attention-products\"\u003e\u003cstrong\u003eIMPORTANT:\u003c\/strong\u003e\u003cbr\u003e\r\nThe tool life will mostly depend on the proper usage and the hardness of the items \r\ndrilled into. It is normal for a diamond core bit to last up to 10 or more \r\ndrilled holes in hard tiles. Please remember to \u003cstrong\u003ealways\u003c\/strong\u003e use \r\nwater when drilling with diamond core bits.\u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n"}
DIAMOND CORE BIT 6MM FOR HARD TILES AND PORCELAIN
R 419.95
{"id":9887174982,"title":"DIAMOND CORE BIT 6MM FOR HARD TILES AND PORCELAIN","handle":"diamond-core-bit-6mm-for-hard-tiles-and-porcelain","description":"\u003c!-- Product header --\u003e\r\n\u003cdiv id=\"tc-desc-header\"\u003e\r\n\t\u003cspan class=\"description-headingBox\"\u003eØ6mm Diamond core bit\u003c\/span\u003e\n\u003c\/div\u003e\r\n\u003ch4\u003e\r\n\u003cimg alt=\"\" height=\"175\" src=\"http:\/\/www.vermontsales.co.za\/images\/torkcraft\/drillbits\/diamond\/dcb_sm1.jpg\" style=\"float: right\" width=\"275\"\u003eApplication:\u003c\/h4\u003e\r\n\u003cp\u003eThe diamond core bit is used to drill holes in:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\t\u003cli\u003eCeramic tiles\u003c\/li\u003e\r\n\t\u003cli\u003eMarble\u003c\/li\u003e\r\n\t\u003cli\u003eGrade 5 porcelain (hardest)\u003c\/li\u003e\r\n\t\u003cli\u003eGranite\u003c\/li\u003e\r\n\t\u003cli\u003eGlass\u003c\/li\u003e\r\n\t\u003cli\u003eSlate\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003eThe diamond core cuts faster, smoother and lasts longer than any other core \r\ndrills.\u003c\/p\u003e\r\n\u003ch4\u003eHow to use the diamond core bit:\u003c\/h4\u003e\r\n\u003cp\u003eThe diamond core drill bit must be used with water at all times when \r\ndrilling. The water serves as a coolant to prevent the diamonds from \r\noverheating. The maximum allowable temperature for a diamond core bit is 500°C.\u003c\/p\u003e\r\n\u003cp\u003eThere is no pilot drill with the diamond core bit. A low rpm rotary drill \r\nwith a planetary gearbox is required to be used with a diamond core bit. It is \r\npossible to use a cordless drill, but in the lowest gear setting. No hammer \r\naction is used.\u003c\/p\u003e\r\n\u003col\u003e\r\n\t\u003cli\u003eTightly fasten the diamond core bit in the drill's chuck.\u003c\/li\u003e\r\n\t\u003cli\u003eKeep the bit steady at a 45?ø angle \r\n\twith the starting point on the edge of the assigned area to be \r\n\tdrilled whilst the bit is rotating.\u003c\/li\u003e\r\n\t\u003cli\u003eA notch will be made (this is normal). \r\n\tGradually move the drill from 45° to 90° and continue drilling until \r\n\tfinished.\u003c\/li\u003e\r\n\t\u003cli\u003eAllow the diamond core bit to cool down completely before proceeding to \r\n\tdrill another hole.\u003c\/li\u003e\r\n\u003c\/ol\u003e\r\n\u003cp\u003eWater can be applied by:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\t\u003cli\u003espraying water on the surface,\u003c\/li\u003e\r\n\t\u003cli\u003eusing a wet sponge,\u003c\/li\u003e\r\n\t\u003cli\u003eattaching a water feed device. This is necessary when drilling into a \r\n\twall tile.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp class=\"info-products\"\u003ePlease have a look at the video in the tabs above \r\nshowing how to use the diamond core bit.\u003c\/p\u003e\r\n\u003ch4\u003eAn indication of the correct spindle speed:\u003c\/h4\u003e\r\n\u003ctable class=\"SpecsTable\" style=\"width: 100%\"\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecHeading\" style=\"width: 50%\"\u003eDIAMOND CORE BIT DIAMETER\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecHeading\" style=\"width: 50%\"\u003eSPINDLE SPEED\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??5.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e800 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??6.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e600 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??7.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e500 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??8.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e500 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003eØ10.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e400 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003eMore than Ø10.0mm (\u0026gt;10.0mm)\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003eless than 400 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\u003c\/table\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp class=\"attention-products\"\u003e\u003cstrong\u003eIMPORTANT:\u003c\/strong\u003e\u003cbr\u003e\r\nThe tool life will mostly depend on the proper usage and the hardness of the items \r\ndrilled into. It is normal for a diamond core bit to last up to 10 or more \r\ndrilled holes in hard tiles. Please remember to \u003cstrong\u003ealways\u003c\/strong\u003e use \r\nwater when drilling with diamond core bits.\u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n","published_at":"2017-03-08T08:49:41-05:00","created_at":"2017-03-08T08:49:44-05:00","vendor":"TORK CRAFT","type":"Diamond Core Bit","tags":["Diamond core bit","Drill bits"],"price":41995,"price_min":41995,"price_max":41995,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":37695354310,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"DCB006","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"DIAMOND CORE BIT 6MM FOR HARD TILES AND PORCELAIN","public_title":null,"options":["Default Title"],"price":41995,"weight":25,"compare_at_price":null,"inventory_quantity":41,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/wwbits.myshopify.com\/cdn\/shop\/products\/DCB006.jpg?v=1488980985"],"featured_image":"\/\/wwbits.myshopify.com\/cdn\/shop\/products\/DCB006.jpg?v=1488980985","options":["Title"],"media":[{"alt":"DIAMOND CORE BIT 6MM FOR HARD TILES AND PORCELAIN","id":521356509219,"position":1,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/wwbits.myshopify.com\/cdn\/shop\/products\/DCB006.jpg?v=1488980985"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/wwbits.myshopify.com\/cdn\/shop\/products\/DCB006.jpg?v=1488980985","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003c!-- Product header --\u003e\r\n\u003cdiv id=\"tc-desc-header\"\u003e\r\n\t\u003cspan class=\"description-headingBox\"\u003eØ6mm Diamond core bit\u003c\/span\u003e\n\u003c\/div\u003e\r\n\u003ch4\u003e\r\n\u003cimg alt=\"\" height=\"175\" src=\"http:\/\/www.vermontsales.co.za\/images\/torkcraft\/drillbits\/diamond\/dcb_sm1.jpg\" style=\"float: right\" width=\"275\"\u003eApplication:\u003c\/h4\u003e\r\n\u003cp\u003eThe diamond core bit is used to drill holes in:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\t\u003cli\u003eCeramic tiles\u003c\/li\u003e\r\n\t\u003cli\u003eMarble\u003c\/li\u003e\r\n\t\u003cli\u003eGrade 5 porcelain (hardest)\u003c\/li\u003e\r\n\t\u003cli\u003eGranite\u003c\/li\u003e\r\n\t\u003cli\u003eGlass\u003c\/li\u003e\r\n\t\u003cli\u003eSlate\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003eThe diamond core cuts faster, smoother and lasts longer than any other core \r\ndrills.\u003c\/p\u003e\r\n\u003ch4\u003eHow to use the diamond core bit:\u003c\/h4\u003e\r\n\u003cp\u003eThe diamond core drill bit must be used with water at all times when \r\ndrilling. The water serves as a coolant to prevent the diamonds from \r\noverheating. The maximum allowable temperature for a diamond core bit is 500°C.\u003c\/p\u003e\r\n\u003cp\u003eThere is no pilot drill with the diamond core bit. A low rpm rotary drill \r\nwith a planetary gearbox is required to be used with a diamond core bit. It is \r\npossible to use a cordless drill, but in the lowest gear setting. No hammer \r\naction is used.\u003c\/p\u003e\r\n\u003col\u003e\r\n\t\u003cli\u003eTightly fasten the diamond core bit in the drill's chuck.\u003c\/li\u003e\r\n\t\u003cli\u003eKeep the bit steady at a 45?ø angle \r\n\twith the starting point on the edge of the assigned area to be \r\n\tdrilled whilst the bit is rotating.\u003c\/li\u003e\r\n\t\u003cli\u003eA notch will be made (this is normal). \r\n\tGradually move the drill from 45° to 90° and continue drilling until \r\n\tfinished.\u003c\/li\u003e\r\n\t\u003cli\u003eAllow the diamond core bit to cool down completely before proceeding to \r\n\tdrill another hole.\u003c\/li\u003e\r\n\u003c\/ol\u003e\r\n\u003cp\u003eWater can be applied by:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\t\u003cli\u003espraying water on the surface,\u003c\/li\u003e\r\n\t\u003cli\u003eusing a wet sponge,\u003c\/li\u003e\r\n\t\u003cli\u003eattaching a water feed device. This is necessary when drilling into a \r\n\twall tile.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp class=\"info-products\"\u003ePlease have a look at the video in the tabs above \r\nshowing how to use the diamond core bit.\u003c\/p\u003e\r\n\u003ch4\u003eAn indication of the correct spindle speed:\u003c\/h4\u003e\r\n\u003ctable class=\"SpecsTable\" style=\"width: 100%\"\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecHeading\" style=\"width: 50%\"\u003eDIAMOND CORE BIT DIAMETER\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecHeading\" style=\"width: 50%\"\u003eSPINDLE SPEED\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??5.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e800 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??6.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e600 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??7.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e500 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??8.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e500 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003eØ10.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e400 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003eMore than Ø10.0mm (\u0026gt;10.0mm)\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003eless than 400 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\u003c\/table\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp class=\"attention-products\"\u003e\u003cstrong\u003eIMPORTANT:\u003c\/strong\u003e\u003cbr\u003e\r\nThe tool life will mostly depend on the proper usage and the hardness of the items \r\ndrilled into. It is normal for a diamond core bit to last up to 10 or more \r\ndrilled holes in hard tiles. Please remember to \u003cstrong\u003ealways\u003c\/strong\u003e use \r\nwater when drilling with diamond core bits.\u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n"}
DIAMOND CORE BIT 64MM FOR TILES HEX SHANK
R 503.60
{"id":9892830214,"title":"DIAMOND CORE BIT 64MM FOR TILES HEX SHANK","handle":"diamond-core-bit-64mm-for-tiles-hex-shank","description":"\u003cp\u003eDIAMOND CORE BIT 64MM FOR TILES HEX SHANK\u003c\/p\u003e","published_at":"2017-03-08T20:11:50-05:00","created_at":"2017-03-08T20:11:52-05:00","vendor":"TORK CRAFT","type":"Diamond Core Bit","tags":[],"price":50360,"price_min":50360,"price_max":50360,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":37796353990,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"TC180864","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"DIAMOND CORE BIT 64MM FOR TILES HEX SHANK","public_title":null,"options":["Default Title"],"price":50360,"weight":200,"compare_at_price":null,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/wwbits.myshopify.com\/cdn\/shop\/products\/TC180864.jpg?v=1489021913"],"featured_image":"\/\/wwbits.myshopify.com\/cdn\/shop\/products\/TC180864.jpg?v=1489021913","options":["Title"],"media":[{"alt":"DIAMOND CORE BIT 64MM FOR TILES HEX SHANK","id":522398466083,"position":1,"preview_image":{"aspect_ratio":0.989,"height":350,"width":346,"src":"\/\/wwbits.myshopify.com\/cdn\/shop\/products\/TC180864.jpg?v=1489021913"},"aspect_ratio":0.989,"height":350,"media_type":"image","src":"\/\/wwbits.myshopify.com\/cdn\/shop\/products\/TC180864.jpg?v=1489021913","width":346}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eDIAMOND CORE BIT 64MM FOR TILES HEX SHANK\u003c\/p\u003e"}
DIAMOND CORE BIT 5MM FOR TILES
R 52.90
{"id":9892822022,"title":"DIAMOND CORE BIT 5MM FOR TILES","handle":"diamond-core-bit-5mm-for-tiles","description":"\u003c!-- Product header --\u003e\r\n\u003cdiv id=\"tc-desc-header\"\u003e\r\n\t\u003cspan class=\"description-headingBox\"\u003eØ5mm Diamond core bit\u003c\/span\u003e\n\u003c\/div\u003e\r\n\u003ch4\u003e\r\n\u003cimg height=\"402\" src=\"http:\/\/www.vermontsales.co.za\/images\/torkcraft\/drillbits\/diamond\/tc1808_sm1.jpg\" style=\"float: right;margin-bottom:10px\" width=\"275\"\u003eApplication:\u003c\/h4\u003e\r\n\u003cp\u003eThe diamond core bit is used to drill holes in:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\t\u003cli\u003eCeramic tiles\u003c\/li\u003e\r\n\t\u003cli\u003eMarble\u003c\/li\u003e\r\n\t\u003cli\u003eGrade 5 porcelain (hardest)\u003c\/li\u003e\r\n\t\u003cli\u003eGranite\u003c\/li\u003e\r\n\t\u003cli\u003eGlass\u003c\/li\u003e\r\n\t\u003cli\u003eSlate\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003eThe diamond core cuts faster, smoother and lasts longer than any other core \r\ndrills.\u003c\/p\u003e\r\n\u003ch4\u003eHow to use the diamond core bit:\u003c\/h4\u003e\r\n\u003cp\u003eThe diamond core drill bit must be used with water at all times when \r\ndrilling. The water serves as a coolant to prevent the diamonds from \r\noverheating. The maximum allowable temperature for a diamond core bit is 500°C.\u003c\/p\u003e\r\n\u003cp\u003eThere is no pilot drill with the diamond core bit. A low rpm rotary drill \r\nwith a planetary gearbox is required to be used with a diamond core bit. It is \r\npossible to use a cordless drill, but in the lowest gear setting. No hammer \r\naction is used.\u003c\/p\u003e\r\n\u003col\u003e\r\n\t\u003cli\u003eTightly fasten the diamond core bit in the drill's chuck.\u003c\/li\u003e\r\n\t\u003cli\u003eKeep the bit steady at a 45?ø angle \r\n\twith the starting point on the edge of the assigned area to be \r\n\tdrilled whilst the bit is rotating.\u003c\/li\u003e\r\n\t\u003cli\u003eA notch will be made (this is normal). \r\n\tGradually move the drill from 45° to 90° and continue drilling until \r\n\tfinished.\u003c\/li\u003e\r\n\t\u003cli\u003eAllow the diamond core bit to cool down completely before proceeding to \r\n\tdrill another hole.\u003c\/li\u003e\r\n\u003c\/ol\u003e\r\n\u003cp\u003eWater can be applied by:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\t\u003cli\u003espraying water on the surface,\u003c\/li\u003e\r\n\t\u003cli\u003eusing a wet sponge,\u003c\/li\u003e\r\n\t\u003cli\u003eattaching a water feed device. This is necessary when drilling into a \r\n\twall tile.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp class=\"info-products\"\u003ePlease have a look at the video in the tabs above \r\nshowing how to use the diamond core bit.\u003c\/p\u003e\r\n\u003ch4\u003eAn indication of the correct spindle speed:\u003c\/h4\u003e\r\n\u003ctable class=\"SpecsTable\" style=\"width: 100%\"\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecHeading\" style=\"width: 50%\"\u003eDIAMOND CORE BIT DIAMETER\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecHeading\" style=\"width: 50%\"\u003eSPINDLE SPEED\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??5.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e800 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??6.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e600 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??7.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e500 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??8.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e500 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003eØ10.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e400 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003eMore than Ø10.0mm (\u0026gt;10.0mm)\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003eless than 400 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\u003c\/table\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp class=\"attention-products\"\u003e\u003cstrong\u003eIMPORTANT:\u003c\/strong\u003e\u003cbr\u003e\r\nThe tool life will mostly depend on the proper usage and the hardness of the items \r\ndrilled into. It is normal for a diamond core bit to last up to 10 or more \r\ndrilled holes in hard tiles. Please remember to \u003cstrong\u003ealways\u003c\/strong\u003e use \r\nwater when drilling with diamond core bits.\u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n","published_at":"2017-03-08T20:10:54-05:00","created_at":"2017-03-08T20:10:55-05:00","vendor":"TORK CRAFT","type":"Diamond Core Bit","tags":["Diamond core bit","Drill bits"],"price":5290,"price_min":5290,"price_max":5290,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":37796244422,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"TC180805","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"DIAMOND CORE BIT 5MM FOR TILES","public_title":null,"options":["Default Title"],"price":5290,"weight":17,"compare_at_price":null,"inventory_quantity":777,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/wwbits.myshopify.com\/cdn\/shop\/products\/TC180805.jpg?v=1489021855"],"featured_image":"\/\/wwbits.myshopify.com\/cdn\/shop\/products\/TC180805.jpg?v=1489021855","options":["Title"],"media":[{"alt":"DIAMOND CORE BIT 5MM FOR TILES","id":522397810723,"position":1,"preview_image":{"aspect_ratio":0.934,"height":350,"width":327,"src":"\/\/wwbits.myshopify.com\/cdn\/shop\/products\/TC180805.jpg?v=1489021855"},"aspect_ratio":0.934,"height":350,"media_type":"image","src":"\/\/wwbits.myshopify.com\/cdn\/shop\/products\/TC180805.jpg?v=1489021855","width":327}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003c!-- Product header --\u003e\r\n\u003cdiv id=\"tc-desc-header\"\u003e\r\n\t\u003cspan class=\"description-headingBox\"\u003eØ5mm Diamond core bit\u003c\/span\u003e\n\u003c\/div\u003e\r\n\u003ch4\u003e\r\n\u003cimg height=\"402\" src=\"http:\/\/www.vermontsales.co.za\/images\/torkcraft\/drillbits\/diamond\/tc1808_sm1.jpg\" style=\"float: right;margin-bottom:10px\" width=\"275\"\u003eApplication:\u003c\/h4\u003e\r\n\u003cp\u003eThe diamond core bit is used to drill holes in:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\t\u003cli\u003eCeramic tiles\u003c\/li\u003e\r\n\t\u003cli\u003eMarble\u003c\/li\u003e\r\n\t\u003cli\u003eGrade 5 porcelain (hardest)\u003c\/li\u003e\r\n\t\u003cli\u003eGranite\u003c\/li\u003e\r\n\t\u003cli\u003eGlass\u003c\/li\u003e\r\n\t\u003cli\u003eSlate\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003eThe diamond core cuts faster, smoother and lasts longer than any other core \r\ndrills.\u003c\/p\u003e\r\n\u003ch4\u003eHow to use the diamond core bit:\u003c\/h4\u003e\r\n\u003cp\u003eThe diamond core drill bit must be used with water at all times when \r\ndrilling. The water serves as a coolant to prevent the diamonds from \r\noverheating. The maximum allowable temperature for a diamond core bit is 500°C.\u003c\/p\u003e\r\n\u003cp\u003eThere is no pilot drill with the diamond core bit. A low rpm rotary drill \r\nwith a planetary gearbox is required to be used with a diamond core bit. It is \r\npossible to use a cordless drill, but in the lowest gear setting. No hammer \r\naction is used.\u003c\/p\u003e\r\n\u003col\u003e\r\n\t\u003cli\u003eTightly fasten the diamond core bit in the drill's chuck.\u003c\/li\u003e\r\n\t\u003cli\u003eKeep the bit steady at a 45?ø angle \r\n\twith the starting point on the edge of the assigned area to be \r\n\tdrilled whilst the bit is rotating.\u003c\/li\u003e\r\n\t\u003cli\u003eA notch will be made (this is normal). \r\n\tGradually move the drill from 45° to 90° and continue drilling until \r\n\tfinished.\u003c\/li\u003e\r\n\t\u003cli\u003eAllow the diamond core bit to cool down completely before proceeding to \r\n\tdrill another hole.\u003c\/li\u003e\r\n\u003c\/ol\u003e\r\n\u003cp\u003eWater can be applied by:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\t\u003cli\u003espraying water on the surface,\u003c\/li\u003e\r\n\t\u003cli\u003eusing a wet sponge,\u003c\/li\u003e\r\n\t\u003cli\u003eattaching a water feed device. This is necessary when drilling into a \r\n\twall tile.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp class=\"info-products\"\u003ePlease have a look at the video in the tabs above \r\nshowing how to use the diamond core bit.\u003c\/p\u003e\r\n\u003ch4\u003eAn indication of the correct spindle speed:\u003c\/h4\u003e\r\n\u003ctable class=\"SpecsTable\" style=\"width: 100%\"\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecHeading\" style=\"width: 50%\"\u003eDIAMOND CORE BIT DIAMETER\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecHeading\" style=\"width: 50%\"\u003eSPINDLE SPEED\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??5.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e800 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??6.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e600 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??7.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e500 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??8.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e500 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003eØ10.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e400 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003eMore than Ø10.0mm (\u0026gt;10.0mm)\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003eless than 400 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\u003c\/table\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp class=\"attention-products\"\u003e\u003cstrong\u003eIMPORTANT:\u003c\/strong\u003e\u003cbr\u003e\r\nThe tool life will mostly depend on the proper usage and the hardness of the items \r\ndrilled into. It is normal for a diamond core bit to last up to 10 or more \r\ndrilled holes in hard tiles. Please remember to \u003cstrong\u003ealways\u003c\/strong\u003e use \r\nwater when drilling with diamond core bits.\u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n"}
DIAMOND CORE BIT 5MM FOR HARD TILES AND PORCELAIN
R 293.83
{"id":9887174470,"title":"DIAMOND CORE BIT 5MM FOR HARD TILES AND PORCELAIN","handle":"diamond-core-bit-5mm-for-hard-tiles-and-porcelain","description":"\u003c!-- Product header --\u003e\r\n\u003cdiv id=\"tc-desc-header\"\u003e\r\n\t\u003cspan class=\"description-headingBox\"\u003eØ5mm Diamond core bit\u003c\/span\u003e\n\u003c\/div\u003e\r\n\u003ch4\u003e\r\n\u003cimg alt=\"\" height=\"175\" src=\"http:\/\/www.vermontsales.co.za\/images\/torkcraft\/drillbits\/diamond\/dcb_sm1.jpg\" style=\"float: right\" width=\"275\"\u003eApplication:\u003c\/h4\u003e\r\n\u003cp\u003eThe diamond core bit is used to drill holes in:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\t\u003cli\u003eCeramic tiles\u003c\/li\u003e\r\n\t\u003cli\u003eMarble\u003c\/li\u003e\r\n\t\u003cli\u003eGrade 5 porcelain (hardest)\u003c\/li\u003e\r\n\t\u003cli\u003eGranite\u003c\/li\u003e\r\n\t\u003cli\u003eGlass\u003c\/li\u003e\r\n\t\u003cli\u003eSlate\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003eThe diamond core cuts faster, smoother and lasts longer than any other core \r\ndrills.\u003c\/p\u003e\r\n\u003ch4\u003eHow to use the diamond core bit:\u003c\/h4\u003e\r\n\u003cp\u003eThe diamond core drill bit must be used with water at all times when \r\ndrilling. The water serves as a coolant to prevent the diamonds from \r\noverheating. The maximum allowable temperature for a diamond core bit is 500°C.\u003c\/p\u003e\r\n\u003cp\u003eThere is no pilot drill with the diamond core bit. A low rpm rotary drill \r\nwith a planetary gearbox is required to be used with a diamond core bit. It is \r\npossible to use a cordless drill, but in the lowest gear setting. No hammer \r\naction is used.\u003c\/p\u003e\r\n\u003col\u003e\r\n\t\u003cli\u003eTightly fasten the diamond core bit in the drill's chuck.\u003c\/li\u003e\r\n\t\u003cli\u003eKeep the bit steady at a 45?ø angle \r\n\twith the starting point on the edge of the assigned area to be \r\n\tdrilled whilst the bit is rotating.\u003c\/li\u003e\r\n\t\u003cli\u003eA notch will be made (this is normal). \r\n\tGradually move the drill from 45° to 90° and continue drilling until \r\n\tfinished.\u003c\/li\u003e\r\n\t\u003cli\u003eAllow the diamond core bit to cool down completely before proceeding to \r\n\tdrill another hole.\u003c\/li\u003e\r\n\u003c\/ol\u003e\r\n\u003cp\u003eWater can be applied by:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\t\u003cli\u003espraying water on the surface,\u003c\/li\u003e\r\n\t\u003cli\u003eusing a wet sponge,\u003c\/li\u003e\r\n\t\u003cli\u003eattaching a water feed device. This is necessary when drilling into a \r\n\twall tile.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp class=\"info-products\"\u003ePlease have a look at the video in the tabs above \r\nshowing how to use the diamond core bit.\u003c\/p\u003e\r\n\u003ch4\u003eAn indication of the correct spindle speed:\u003c\/h4\u003e\r\n\u003ctable class=\"SpecsTable\" style=\"width: 100%\"\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecHeading\" style=\"width: 50%\"\u003eDIAMOND CORE BIT DIAMETER\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecHeading\" style=\"width: 50%\"\u003eSPINDLE SPEED\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??5.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e800 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??6.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e600 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??7.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e500 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??8.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e500 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003eØ10.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e400 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003eMore than Ø10.0mm (\u0026gt;10.0mm)\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003eless than 400 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\u003c\/table\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp class=\"attention-products\"\u003e\u003cstrong\u003eIMPORTANT:\u003c\/strong\u003e\u003cbr\u003e\r\nThe tool life will mostly depend on the proper usage and the hardness of the items \r\ndrilled into. It is normal for a diamond core bit to last up to 10 or more \r\ndrilled holes in hard tiles. Please remember to \u003cstrong\u003ealways\u003c\/strong\u003e use \r\nwater when drilling with diamond core bits.\u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n","published_at":"2017-03-08T08:49:37-05:00","created_at":"2017-03-08T08:49:41-05:00","vendor":"TORK CRAFT","type":"Diamond Core Bit","tags":["Diamond core bit","Drill bits"],"price":29383,"price_min":29383,"price_max":29383,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":37695349062,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"DCB005","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"DIAMOND CORE BIT 5MM FOR HARD TILES AND PORCELAIN","public_title":null,"options":["Default Title"],"price":29383,"weight":25,"compare_at_price":null,"inventory_quantity":212,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/wwbits.myshopify.com\/cdn\/shop\/products\/DCB005.jpg?v=1488980981"],"featured_image":"\/\/wwbits.myshopify.com\/cdn\/shop\/products\/DCB005.jpg?v=1488980981","options":["Title"],"media":[{"alt":"DIAMOND CORE BIT 5MM FOR HARD TILES AND PORCELAIN","id":521356476451,"position":1,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/wwbits.myshopify.com\/cdn\/shop\/products\/DCB005.jpg?v=1488980981"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/wwbits.myshopify.com\/cdn\/shop\/products\/DCB005.jpg?v=1488980981","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003c!-- Product header --\u003e\r\n\u003cdiv id=\"tc-desc-header\"\u003e\r\n\t\u003cspan class=\"description-headingBox\"\u003eØ5mm Diamond core bit\u003c\/span\u003e\n\u003c\/div\u003e\r\n\u003ch4\u003e\r\n\u003cimg alt=\"\" height=\"175\" src=\"http:\/\/www.vermontsales.co.za\/images\/torkcraft\/drillbits\/diamond\/dcb_sm1.jpg\" style=\"float: right\" width=\"275\"\u003eApplication:\u003c\/h4\u003e\r\n\u003cp\u003eThe diamond core bit is used to drill holes in:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\t\u003cli\u003eCeramic tiles\u003c\/li\u003e\r\n\t\u003cli\u003eMarble\u003c\/li\u003e\r\n\t\u003cli\u003eGrade 5 porcelain (hardest)\u003c\/li\u003e\r\n\t\u003cli\u003eGranite\u003c\/li\u003e\r\n\t\u003cli\u003eGlass\u003c\/li\u003e\r\n\t\u003cli\u003eSlate\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003eThe diamond core cuts faster, smoother and lasts longer than any other core \r\ndrills.\u003c\/p\u003e\r\n\u003ch4\u003eHow to use the diamond core bit:\u003c\/h4\u003e\r\n\u003cp\u003eThe diamond core drill bit must be used with water at all times when \r\ndrilling. The water serves as a coolant to prevent the diamonds from \r\noverheating. The maximum allowable temperature for a diamond core bit is 500°C.\u003c\/p\u003e\r\n\u003cp\u003eThere is no pilot drill with the diamond core bit. A low rpm rotary drill \r\nwith a planetary gearbox is required to be used with a diamond core bit. It is \r\npossible to use a cordless drill, but in the lowest gear setting. No hammer \r\naction is used.\u003c\/p\u003e\r\n\u003col\u003e\r\n\t\u003cli\u003eTightly fasten the diamond core bit in the drill's chuck.\u003c\/li\u003e\r\n\t\u003cli\u003eKeep the bit steady at a 45?ø angle \r\n\twith the starting point on the edge of the assigned area to be \r\n\tdrilled whilst the bit is rotating.\u003c\/li\u003e\r\n\t\u003cli\u003eA notch will be made (this is normal). \r\n\tGradually move the drill from 45° to 90° and continue drilling until \r\n\tfinished.\u003c\/li\u003e\r\n\t\u003cli\u003eAllow the diamond core bit to cool down completely before proceeding to \r\n\tdrill another hole.\u003c\/li\u003e\r\n\u003c\/ol\u003e\r\n\u003cp\u003eWater can be applied by:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\t\u003cli\u003espraying water on the surface,\u003c\/li\u003e\r\n\t\u003cli\u003eusing a wet sponge,\u003c\/li\u003e\r\n\t\u003cli\u003eattaching a water feed device. This is necessary when drilling into a \r\n\twall tile.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp class=\"info-products\"\u003ePlease have a look at the video in the tabs above \r\nshowing how to use the diamond core bit.\u003c\/p\u003e\r\n\u003ch4\u003eAn indication of the correct spindle speed:\u003c\/h4\u003e\r\n\u003ctable class=\"SpecsTable\" style=\"width: 100%\"\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecHeading\" style=\"width: 50%\"\u003eDIAMOND CORE BIT DIAMETER\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecHeading\" style=\"width: 50%\"\u003eSPINDLE SPEED\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??5.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e800 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??6.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e600 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??7.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e500 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??8.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e500 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003eØ10.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e400 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003eMore than Ø10.0mm (\u0026gt;10.0mm)\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003eless than 400 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\u003c\/table\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp class=\"attention-products\"\u003e\u003cstrong\u003eIMPORTANT:\u003c\/strong\u003e\u003cbr\u003e\r\nThe tool life will mostly depend on the proper usage and the hardness of the items \r\ndrilled into. It is normal for a diamond core bit to last up to 10 or more \r\ndrilled holes in hard tiles. Please remember to \u003cstrong\u003ealways\u003c\/strong\u003e use \r\nwater when drilling with diamond core bits.\u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n"}
DIAMOND CORE BIT 57MM FOR TILES HEX SHANK
R 493.36
{"id":9892829894,"title":"DIAMOND CORE BIT 57MM FOR TILES HEX SHANK","handle":"diamond-core-bit-57mm-for-tiles-hex-shank","description":"\u003cp\u003eDIAMOND CORE BIT 57MM FOR TILES HEX SHANK\u003c\/p\u003e","published_at":"2017-03-08T20:11:48-05:00","created_at":"2017-03-08T20:11:50-05:00","vendor":"TORK CRAFT","type":"Diamond Core Bit","tags":[],"price":49336,"price_min":49336,"price_max":49336,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":37796348998,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"TC180857","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"DIAMOND CORE BIT 57MM FOR TILES HEX SHANK","public_title":null,"options":["Default Title"],"price":49336,"weight":175,"compare_at_price":null,"inventory_quantity":128,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/wwbits.myshopify.com\/cdn\/shop\/products\/TC180857.jpg?v=1489021910"],"featured_image":"\/\/wwbits.myshopify.com\/cdn\/shop\/products\/TC180857.jpg?v=1489021910","options":["Title"],"media":[{"alt":"DIAMOND CORE BIT 57MM FOR TILES HEX SHANK","id":522398433315,"position":1,"preview_image":{"aspect_ratio":0.982,"height":450,"width":442,"src":"\/\/wwbits.myshopify.com\/cdn\/shop\/products\/TC180857.jpg?v=1489021910"},"aspect_ratio":0.982,"height":450,"media_type":"image","src":"\/\/wwbits.myshopify.com\/cdn\/shop\/products\/TC180857.jpg?v=1489021910","width":442}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eDIAMOND CORE BIT 57MM FOR TILES HEX SHANK\u003c\/p\u003e"}