COMPOUNDING SPONGE 150MM X M14 WHITE HARD FOAM PAD

COMPOUNDING SPONGE 150MM X M14 WHITE HARD FOAM PAD

Compounding sponge Pattern: Standard Density: Firm Colour: White Diameter: Ø150mm Thread/Velcro: M14  Application: The compounding sponge should be used with an automotive polisher. It is...

Brand :TORK CRAFT

Type :Sponge

Code :

Availability :

R 101.95
Compounding sponge

Pattern: Standard
Density: Firm
Colour: White
Diameter: Ø150mm
Thread/Velcro: M14

 Application:

The compounding sponge should be used with an automotive polisher.

It is necessary to polish a vehicle body panel when:

  • The panel has been newly painted with a clear-coat.
  • Shallow scratch marks need to be removed.
  • The panel has suffered from oxidation.
  • Swirl marks and hologram defects need to be removed.

Compounding sponge uses:

COLOUR POLISH COMPOUND
White Good Best
Orange Good Best
Red Best  
Black Best  

Compounding sponge range:

ORDER NO. DENSITY COLOUR DIAMETER THREAD PATTERN
SPC00101 Firm Orange ??200mm Velcro Standard
SPC00100 Soft Yellow ??200mm Velcro Standard
SPC00102 Soft Red ??200mm Velcro Standard
TCCS15058 Firm White ??150mm 5/8 UNC Standard
TCCS15014-1 Firm White ??150mm M14 Standard
TCCS15014-4 Firm White ??150mm M14 Standard
TCCS15014 Firm Orange ??150mm M14 Standard
TCC15014-2 Soft Red ??150mm M14 Standard
TCCS15014-3 Soft Black ??150mm M14 Standard
TCCS15014-5 Soft Black ??150mm M14 Waffle
SPC00124 Firm Blue ??125mm Velcro Standard

NOTE:
For the ??200mm velcro compounding sponges, use the M14 backing pad SPC00106.

Adaptors to convert or lenghten the polisher's thread:

ORDER NO./td> MALE THREAD FEMALE THREAD
SPC00055 5/8 UNC 5/8 UNC
SPC00053 5/8 UNC M14
SPC00054 M14 5/8 UNC
SPC00052 M14 M14

Recommended polishing compounds to use:

  • Liquid Shine™ High cut - Features a silicone, wax and filler free polishing compound to give a high gloss finish on fresh or cured paint. It is capable of removing P1500 grit sanding marks. It can be used on automotive paints, marine gel-coats and on composite surfaces.
  • Liquid Shine™ Fine cut - similar to the High cut polishing compound, but it is designed for use on a ceramic and scratch resistant clear-coat. It is capable of removing P2000 scratch marks.
  • Liquid Shine™ Zero swirl - Very low abrasive for the final step of polishing. Removes holograms and swirl marks. Use a soft compounding sponge as a final step