Products
Filter
DIAMOND CORE BIT 10MM FOR HARD TILES AND PORCELAIN
R 357.91
{"id":9887176134,"title":"DIAMOND CORE BIT 10MM FOR HARD TILES AND PORCELAIN","handle":"diamond-core-bit-10mm-for-hard-tiles-and-porcelain","description":"\u003c!-- Product header --\u003e\r\n\u003cdiv id=\"tc-desc-header\"\u003e\r\n\t\u003cspan class=\"description-headingBox\"\u003eØ10mm Diamond core bit\u003c\/span\u003e\n\u003c\/div\u003e\r\n\u003ch4\u003e\r\n\u003cimg alt=\"\" height=\"175\" src=\"http:\/\/www.vermontsales.co.za\/images\/torkcraft\/drillbits\/diamond\/dcb_sm1.jpg\" style=\"float: right\" width=\"275\"\u003eApplication:\u003c\/h4\u003e\r\n\u003cp\u003eThe diamond core bit is used to drill holes in:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\t\u003cli\u003eCeramic tiles\u003c\/li\u003e\r\n\t\u003cli\u003eMarble\u003c\/li\u003e\r\n\t\u003cli\u003eGrade 5 porcelain (hardest)\u003c\/li\u003e\r\n\t\u003cli\u003eGranite\u003c\/li\u003e\r\n\t\u003cli\u003eGlass\u003c\/li\u003e\r\n\t\u003cli\u003eSlate\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003eThe diamond core cuts faster, smoother and lasts longer than any other core \r\ndrills.\u003c\/p\u003e\r\n\u003ch4\u003eHow to use the diamond core bit:\u003c\/h4\u003e\r\n\u003cp\u003eThe diamond core drill bit must be used with water at all times when \r\ndrilling. The water serves as a coolant to prevent the diamonds from \r\noverheating. The maximum allowable temperature for a diamond core bit is 500°C.\u003c\/p\u003e\r\n\u003cp\u003eThere is no pilot drill with the diamond core bit. A low rpm rotary drill \r\nwith a planetary gearbox is required to be used with a diamond core bit. It is \r\npossible to use a cordless drill, but in the lowest gear setting. No hammer \r\naction is used.\u003c\/p\u003e\r\n\u003col\u003e\r\n\t\u003cli\u003eTightly fasten the diamond core bit in the drill's chuck.\u003c\/li\u003e\r\n\t\u003cli\u003eKeep the bit steady at a 45?ø angle \r\n\twith the starting point on the edge of the assigned area to be \r\n\tdrilled whilst the bit is rotating.\u003c\/li\u003e\r\n\t\u003cli\u003eA notch will be made (this is normal). \r\n\tGradually move the drill from 45° to 90° and continue drilling until \r\n\tfinished.\u003c\/li\u003e\r\n\t\u003cli\u003eAllow the diamond core bit to cool down completely before proceeding to \r\n\tdrill another hole.\u003c\/li\u003e\r\n\u003c\/ol\u003e\r\n\u003cp\u003eWater can be applied by:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\t\u003cli\u003espraying water on the surface,\u003c\/li\u003e\r\n\t\u003cli\u003eusing a wet sponge,\u003c\/li\u003e\r\n\t\u003cli\u003eattaching a water feed device. This is necessary when drilling into a \r\n\twall tile.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp class=\"info-products\"\u003ePlease have a look at the video in the tabs above \r\nshowing how to use the diamond core bit.\u003c\/p\u003e\r\n\u003ch4\u003eAn indication of the correct spindle speed:\u003c\/h4\u003e\r\n\u003ctable class=\"SpecsTable\" style=\"width: 100%\"\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecHeading\" style=\"width: 50%\"\u003eDIAMOND CORE BIT DIAMETER\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecHeading\" style=\"width: 50%\"\u003eSPINDLE SPEED\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??5.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e800 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??6.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e600 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??7.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e500 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??8.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e500 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003eØ10.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e400 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003eMore than Ø10.0mm (\u0026gt;10.0mm)\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003eless than 400 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\u003c\/table\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp class=\"attention-products\"\u003e\u003cstrong\u003eIMPORTANT:\u003c\/strong\u003e\u003cbr\u003e\r\nThe tool life will mostly depend on the proper usage and the hardness of the items \r\ndrilled into. It is normal for a diamond core bit to last up to 10 or more \r\ndrilled holes in hard tiles. Please remember to \u003cstrong\u003ealways\u003c\/strong\u003e use \r\nwater when drilling with diamond core bits.\u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n","published_at":"2017-03-08T08:49:49-05:00","created_at":"2017-03-08T08:49:53-05:00","vendor":"TORK CRAFT","type":"Diamond Core Bit","tags":["Diamond core bit","Drill bits"],"price":35791,"price_min":35791,"price_max":35791,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":37695379654,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"DCB010","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"DIAMOND CORE BIT 10MM FOR HARD TILES AND PORCELAIN","public_title":null,"options":["Default Title"],"price":35791,"weight":25,"compare_at_price":null,"inventory_quantity":292,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/wwbits.myshopify.com\/cdn\/shop\/products\/DCB010.jpg?v=1488980993"],"featured_image":"\/\/wwbits.myshopify.com\/cdn\/shop\/products\/DCB010.jpg?v=1488980993","options":["Title"],"media":[{"alt":"DIAMOND CORE BIT 10MM FOR HARD TILES AND PORCELAIN","id":521356607523,"position":1,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/wwbits.myshopify.com\/cdn\/shop\/products\/DCB010.jpg?v=1488980993"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/wwbits.myshopify.com\/cdn\/shop\/products\/DCB010.jpg?v=1488980993","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003c!-- Product header --\u003e\r\n\u003cdiv id=\"tc-desc-header\"\u003e\r\n\t\u003cspan class=\"description-headingBox\"\u003eØ10mm Diamond core bit\u003c\/span\u003e\n\u003c\/div\u003e\r\n\u003ch4\u003e\r\n\u003cimg alt=\"\" height=\"175\" src=\"http:\/\/www.vermontsales.co.za\/images\/torkcraft\/drillbits\/diamond\/dcb_sm1.jpg\" style=\"float: right\" width=\"275\"\u003eApplication:\u003c\/h4\u003e\r\n\u003cp\u003eThe diamond core bit is used to drill holes in:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\t\u003cli\u003eCeramic tiles\u003c\/li\u003e\r\n\t\u003cli\u003eMarble\u003c\/li\u003e\r\n\t\u003cli\u003eGrade 5 porcelain (hardest)\u003c\/li\u003e\r\n\t\u003cli\u003eGranite\u003c\/li\u003e\r\n\t\u003cli\u003eGlass\u003c\/li\u003e\r\n\t\u003cli\u003eSlate\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003eThe diamond core cuts faster, smoother and lasts longer than any other core \r\ndrills.\u003c\/p\u003e\r\n\u003ch4\u003eHow to use the diamond core bit:\u003c\/h4\u003e\r\n\u003cp\u003eThe diamond core drill bit must be used with water at all times when \r\ndrilling. The water serves as a coolant to prevent the diamonds from \r\noverheating. The maximum allowable temperature for a diamond core bit is 500°C.\u003c\/p\u003e\r\n\u003cp\u003eThere is no pilot drill with the diamond core bit. A low rpm rotary drill \r\nwith a planetary gearbox is required to be used with a diamond core bit. It is \r\npossible to use a cordless drill, but in the lowest gear setting. No hammer \r\naction is used.\u003c\/p\u003e\r\n\u003col\u003e\r\n\t\u003cli\u003eTightly fasten the diamond core bit in the drill's chuck.\u003c\/li\u003e\r\n\t\u003cli\u003eKeep the bit steady at a 45?ø angle \r\n\twith the starting point on the edge of the assigned area to be \r\n\tdrilled whilst the bit is rotating.\u003c\/li\u003e\r\n\t\u003cli\u003eA notch will be made (this is normal). \r\n\tGradually move the drill from 45° to 90° and continue drilling until \r\n\tfinished.\u003c\/li\u003e\r\n\t\u003cli\u003eAllow the diamond core bit to cool down completely before proceeding to \r\n\tdrill another hole.\u003c\/li\u003e\r\n\u003c\/ol\u003e\r\n\u003cp\u003eWater can be applied by:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\t\u003cli\u003espraying water on the surface,\u003c\/li\u003e\r\n\t\u003cli\u003eusing a wet sponge,\u003c\/li\u003e\r\n\t\u003cli\u003eattaching a water feed device. This is necessary when drilling into a \r\n\twall tile.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp class=\"info-products\"\u003ePlease have a look at the video in the tabs above \r\nshowing how to use the diamond core bit.\u003c\/p\u003e\r\n\u003ch4\u003eAn indication of the correct spindle speed:\u003c\/h4\u003e\r\n\u003ctable class=\"SpecsTable\" style=\"width: 100%\"\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecHeading\" style=\"width: 50%\"\u003eDIAMOND CORE BIT DIAMETER\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecHeading\" style=\"width: 50%\"\u003eSPINDLE SPEED\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??5.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e800 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??6.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e600 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??7.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e500 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??8.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e500 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003eØ10.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e400 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003eMore than Ø10.0mm (\u0026gt;10.0mm)\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003eless than 400 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\u003c\/table\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp class=\"attention-products\"\u003e\u003cstrong\u003eIMPORTANT:\u003c\/strong\u003e\u003cbr\u003e\r\nThe tool life will mostly depend on the proper usage and the hardness of the items \r\ndrilled into. It is normal for a diamond core bit to last up to 10 or more \r\ndrilled holes in hard tiles. Please remember to \u003cstrong\u003ealways\u003c\/strong\u003e use \r\nwater when drilling with diamond core bits.\u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n"}
DIAMOND CORE BIT 10MM FOR TILES
R 86.70
{"id":9892822854,"title":"DIAMOND CORE BIT 10MM FOR TILES","handle":"diamond-core-bit-10mm-for-tiles","description":"\u003c!-- Product header --\u003e\r\n\u003cdiv id=\"tc-desc-header\"\u003e\r\n\t\u003cspan class=\"description-headingBox\"\u003eØ10mm Diamond core bit\u003c\/span\u003e\n\u003c\/div\u003e\r\n\u003ch4\u003e\r\n\u003cimg height=\"402\" src=\"http:\/\/www.vermontsales.co.za\/images\/torkcraft\/drillbits\/diamond\/tc1808_sm1.jpg\" style=\"float: right;margin-bottom:10px\" width=\"275\"\u003eApplication:\u003c\/h4\u003e\r\n\u003cp\u003eThe diamond core bit is used to drill holes in:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\t\u003cli\u003eCeramic tiles\u003c\/li\u003e\r\n\t\u003cli\u003eMarble\u003c\/li\u003e\r\n\t\u003cli\u003eGrade 5 porcelain (hardest)\u003c\/li\u003e\r\n\t\u003cli\u003eGranite\u003c\/li\u003e\r\n\t\u003cli\u003eGlass\u003c\/li\u003e\r\n\t\u003cli\u003eSlate\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003eThe diamond core cuts faster, smoother and lasts longer than any other core \r\ndrills.\u003c\/p\u003e\r\n\u003ch4\u003eHow to use the diamond core bit:\u003c\/h4\u003e\r\n\u003cp\u003eThe diamond core drill bit must be used with water at all times when \r\ndrilling. The water serves as a coolant to prevent the diamonds from \r\noverheating. The maximum allowable temperature for a diamond core bit is 500°C.\u003c\/p\u003e\r\n\u003cp\u003eThere is no pilot drill with the diamond core bit. A low rpm rotary drill \r\nwith a planetary gearbox is required to be used with a diamond core bit. It is \r\npossible to use a cordless drill, but in the lowest gear setting. No hammer \r\naction is used.\u003c\/p\u003e\r\n\u003col\u003e\r\n\t\u003cli\u003eTightly fasten the diamond core bit in the drill's chuck.\u003c\/li\u003e\r\n\t\u003cli\u003eKeep the bit steady at a 45?ø angle \r\n\twith the starting point on the edge of the assigned area to be \r\n\tdrilled whilst the bit is rotating.\u003c\/li\u003e\r\n\t\u003cli\u003eA notch will be made (this is normal). \r\n\tGradually move the drill from 45° to 90° and continue drilling until \r\n\tfinished.\u003c\/li\u003e\r\n\t\u003cli\u003eAllow the diamond core bit to cool down completely before proceeding to \r\n\tdrill another hole.\u003c\/li\u003e\r\n\u003c\/ol\u003e\r\n\u003cp\u003eWater can be applied by:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\t\u003cli\u003espraying water on the surface,\u003c\/li\u003e\r\n\t\u003cli\u003eusing a wet sponge,\u003c\/li\u003e\r\n\t\u003cli\u003eattaching a water feed device. This is necessary when drilling into a \r\n\twall tile.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp class=\"info-products\"\u003ePlease have a look at the video in the tabs above \r\nshowing how to use the diamond core bit.\u003c\/p\u003e\r\n\u003ch4\u003eAn indication of the correct spindle speed:\u003c\/h4\u003e\r\n\u003ctable class=\"SpecsTable\" style=\"width: 100%\"\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecHeading\" style=\"width: 50%\"\u003eDIAMOND CORE BIT DIAMETER\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecHeading\" style=\"width: 50%\"\u003eSPINDLE SPEED\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??5.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e800 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??6.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e600 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??7.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e500 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??8.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e500 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003eØ10.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e400 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003eMore than Ø10.0mm (\u0026gt;10.0mm)\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003eless than 400 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\u003c\/table\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp class=\"attention-products\"\u003e\u003cstrong\u003eIMPORTANT:\u003c\/strong\u003e\u003cbr\u003e\r\nThe tool life will mostly depend on the proper usage and the hardness of the items \r\ndrilled into. It is normal for a diamond core bit to last up to 10 or more \r\ndrilled holes in hard tiles. Please remember to \u003cstrong\u003ealways\u003c\/strong\u003e use \r\nwater when drilling with diamond core bits.\u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n","published_at":"2017-03-08T20:10:59-05:00","created_at":"2017-03-08T20:11:01-05:00","vendor":"TORK CRAFT","type":"Diamond Core Bit","tags":["Diamond core bit","Drill bits"],"price":8670,"price_min":8670,"price_max":8670,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":37796259974,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"TC180810","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"DIAMOND CORE BIT 10MM FOR TILES","public_title":null,"options":["Default Title"],"price":8670,"weight":19,"compare_at_price":null,"inventory_quantity":936,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/wwbits.myshopify.com\/cdn\/shop\/products\/TC180810.jpg?v=1489021861"],"featured_image":"\/\/wwbits.myshopify.com\/cdn\/shop\/products\/TC180810.jpg?v=1489021861","options":["Title"],"media":[{"alt":"DIAMOND CORE BIT 10MM FOR TILES","id":522397909027,"position":1,"preview_image":{"aspect_ratio":0.949,"height":350,"width":332,"src":"\/\/wwbits.myshopify.com\/cdn\/shop\/products\/TC180810.jpg?v=1489021861"},"aspect_ratio":0.949,"height":350,"media_type":"image","src":"\/\/wwbits.myshopify.com\/cdn\/shop\/products\/TC180810.jpg?v=1489021861","width":332}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003c!-- Product header --\u003e\r\n\u003cdiv id=\"tc-desc-header\"\u003e\r\n\t\u003cspan class=\"description-headingBox\"\u003eØ10mm Diamond core bit\u003c\/span\u003e\n\u003c\/div\u003e\r\n\u003ch4\u003e\r\n\u003cimg height=\"402\" src=\"http:\/\/www.vermontsales.co.za\/images\/torkcraft\/drillbits\/diamond\/tc1808_sm1.jpg\" style=\"float: right;margin-bottom:10px\" width=\"275\"\u003eApplication:\u003c\/h4\u003e\r\n\u003cp\u003eThe diamond core bit is used to drill holes in:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\t\u003cli\u003eCeramic tiles\u003c\/li\u003e\r\n\t\u003cli\u003eMarble\u003c\/li\u003e\r\n\t\u003cli\u003eGrade 5 porcelain (hardest)\u003c\/li\u003e\r\n\t\u003cli\u003eGranite\u003c\/li\u003e\r\n\t\u003cli\u003eGlass\u003c\/li\u003e\r\n\t\u003cli\u003eSlate\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003eThe diamond core cuts faster, smoother and lasts longer than any other core \r\ndrills.\u003c\/p\u003e\r\n\u003ch4\u003eHow to use the diamond core bit:\u003c\/h4\u003e\r\n\u003cp\u003eThe diamond core drill bit must be used with water at all times when \r\ndrilling. The water serves as a coolant to prevent the diamonds from \r\noverheating. The maximum allowable temperature for a diamond core bit is 500°C.\u003c\/p\u003e\r\n\u003cp\u003eThere is no pilot drill with the diamond core bit. A low rpm rotary drill \r\nwith a planetary gearbox is required to be used with a diamond core bit. It is \r\npossible to use a cordless drill, but in the lowest gear setting. No hammer \r\naction is used.\u003c\/p\u003e\r\n\u003col\u003e\r\n\t\u003cli\u003eTightly fasten the diamond core bit in the drill's chuck.\u003c\/li\u003e\r\n\t\u003cli\u003eKeep the bit steady at a 45?ø angle \r\n\twith the starting point on the edge of the assigned area to be \r\n\tdrilled whilst the bit is rotating.\u003c\/li\u003e\r\n\t\u003cli\u003eA notch will be made (this is normal). \r\n\tGradually move the drill from 45° to 90° and continue drilling until \r\n\tfinished.\u003c\/li\u003e\r\n\t\u003cli\u003eAllow the diamond core bit to cool down completely before proceeding to \r\n\tdrill another hole.\u003c\/li\u003e\r\n\u003c\/ol\u003e\r\n\u003cp\u003eWater can be applied by:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\t\u003cli\u003espraying water on the surface,\u003c\/li\u003e\r\n\t\u003cli\u003eusing a wet sponge,\u003c\/li\u003e\r\n\t\u003cli\u003eattaching a water feed device. This is necessary when drilling into a \r\n\twall tile.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp class=\"info-products\"\u003ePlease have a look at the video in the tabs above \r\nshowing how to use the diamond core bit.\u003c\/p\u003e\r\n\u003ch4\u003eAn indication of the correct spindle speed:\u003c\/h4\u003e\r\n\u003ctable class=\"SpecsTable\" style=\"width: 100%\"\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecHeading\" style=\"width: 50%\"\u003eDIAMOND CORE BIT DIAMETER\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecHeading\" style=\"width: 50%\"\u003eSPINDLE SPEED\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??5.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e800 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??6.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e600 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??7.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e500 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??8.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e500 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003eØ10.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e400 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003eMore than Ø10.0mm (\u0026gt;10.0mm)\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003eless than 400 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\u003c\/table\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp class=\"attention-products\"\u003e\u003cstrong\u003eIMPORTANT:\u003c\/strong\u003e\u003cbr\u003e\r\nThe tool life will mostly depend on the proper usage and the hardness of the items \r\ndrilled into. It is normal for a diamond core bit to last up to 10 or more \r\ndrilled holes in hard tiles. Please remember to \u003cstrong\u003ealways\u003c\/strong\u003e use \r\nwater when drilling with diamond core bits.\u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n"}
DIAMOND CORE BIT 117 X 150MM CONCRETE M16
R 1,399.00
{"id":9892819910,"title":"DIAMOND CORE BIT 117 X 150MM CONCRETE M16","handle":"diamond-core-bit-117-x-150mm-concrete-m16","description":"\u003c!-- Product header --\u003e\r\n\u003cdiv id=\"tc-desc-header\"\u003e\r\n\t\u003cspan class=\"description-headingBox\"\u003eDry Cut Diamond Core Drill\u003c\/span\u003e\n\u003c\/div\u003e\r\n\u003cp class=\"note_box\"\u003eFor plumbers, electricians or general contractors needing to \r\ndrill a hole quickly and cleanly in concrete for an installation.\u003c\/p\u003e\r\n\r\n\r\n\u003cimg height=\"514\" src=\"http:\/\/www.vermontsales.co.za\/images\/torkcraft\/drillbits\/diamond\/tc1800_concrete_sm1.jpg\" style=\"float: right;margin-left:10px\" width=\"275\"\u003e\u003cp class=\"feature_box\" style=\"width: 260px; text-align: left;\"\u003e\r\n\u003cstrong\u003e\r\nCore diameter:\u003c\/strong\u003e Ø117mm\u003cbr\u003e\r\n\u003cstrong\u003eDepth:\u003c\/strong\u003e 150mm\u003cbr\u003e\r\n\u003cstrong\u003eAdaptor thread:\u003c\/strong\u003e M16\u003cbr\u003e\r\n\u003cstrong\u003eMain use:\u003c\/strong\u003e Concrete\u003c\/p\u003e\r\n\u003ch4\u003eApplication:\u003c\/h4\u003e\r\n\u003cp\u003eThe dry cut diamond core drill is designed to be used without water to drill \r\ninto:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\t\u003cli\u003eConcrete\u003c\/li\u003e\r\n\t\u003cli\u003eConcrete pipes\u003c\/li\u003e\r\n\t\u003cli\u003eBrickwork\u003c\/li\u003e\r\n\t\u003cli\u003eRoof tiles\u003c\/li\u003e\r\n\t\u003cli\u003eSlate\u003c\/li\u003e\r\n\t\u003cli\u003eStone\u003c\/li\u003e\r\n\t\u003cli\u003ePaving\u003c\/li\u003e\r\n\t\u003cli\u003eTarmac\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\r\n\u003cp\u003eIt allows the user to drill neat and clean holes quickly without the setup an cleanup time associated with using a water-cooled drilling jig.\u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp class=\"info-products\"\u003e\u003cstrong\u003eINFORMATION:\u003c\/strong\u003e\u003cbr\u003e\r\nHave a look at the different adaptors under the EXTRA INFO tab and the complete \r\nrange under the ACCESSORIES tab.\u003c\/p\u003e\r\n\u003cp class=\"attention-products\"\u003e\u003cstrong\u003eIMPORTANT:\u003c\/strong\u003e\u003cbr\u003e\r\nNot for reinforced drilling! Use a wall scanner to detect reinforcing, water \r\npipes or electrical conduit.\u003c\/p\u003e\r\n\u003cp\u003e\r\n\u003cimg height=\"62\" src=\"http:\/\/www.vermontsales.co.za\/images\/torkcraft\/drillbits\/diamond\/formula_diamond_lg1.jpg\" width=\"565\"\u003e\u003c\/p\u003e\r\n","published_at":"2017-03-08T20:10:37-05:00","created_at":"2017-03-08T20:10:39-05:00","vendor":"TORK CRAFT","type":"Diamond Core Bits","tags":["Diamond core bit","Drill bits"],"price":139900,"price_min":139900,"price_max":139900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":37796198470,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"TC180117-3","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"DIAMOND CORE BIT 117 X 150MM CONCRETE M16","public_title":null,"options":["Default Title"],"price":139900,"weight":1770,"compare_at_price":null,"inventory_quantity":19,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/wwbits.myshopify.com\/cdn\/shop\/products\/TC180117-3.jpg?v=1489021839"],"featured_image":"\/\/wwbits.myshopify.com\/cdn\/shop\/products\/TC180117-3.jpg?v=1489021839","options":["Title"],"media":[{"alt":"DIAMOND CORE BIT 117 X 150MM CONCRETE M16","id":522397646883,"position":1,"preview_image":{"aspect_ratio":0.951,"height":350,"width":333,"src":"\/\/wwbits.myshopify.com\/cdn\/shop\/products\/TC180117-3.jpg?v=1489021839"},"aspect_ratio":0.951,"height":350,"media_type":"image","src":"\/\/wwbits.myshopify.com\/cdn\/shop\/products\/TC180117-3.jpg?v=1489021839","width":333}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003c!-- Product header --\u003e\r\n\u003cdiv id=\"tc-desc-header\"\u003e\r\n\t\u003cspan class=\"description-headingBox\"\u003eDry Cut Diamond Core Drill\u003c\/span\u003e\n\u003c\/div\u003e\r\n\u003cp class=\"note_box\"\u003eFor plumbers, electricians or general contractors needing to \r\ndrill a hole quickly and cleanly in concrete for an installation.\u003c\/p\u003e\r\n\r\n\r\n\u003cimg height=\"514\" src=\"http:\/\/www.vermontsales.co.za\/images\/torkcraft\/drillbits\/diamond\/tc1800_concrete_sm1.jpg\" style=\"float: right;margin-left:10px\" width=\"275\"\u003e\u003cp class=\"feature_box\" style=\"width: 260px; text-align: left;\"\u003e\r\n\u003cstrong\u003e\r\nCore diameter:\u003c\/strong\u003e Ø117mm\u003cbr\u003e\r\n\u003cstrong\u003eDepth:\u003c\/strong\u003e 150mm\u003cbr\u003e\r\n\u003cstrong\u003eAdaptor thread:\u003c\/strong\u003e M16\u003cbr\u003e\r\n\u003cstrong\u003eMain use:\u003c\/strong\u003e Concrete\u003c\/p\u003e\r\n\u003ch4\u003eApplication:\u003c\/h4\u003e\r\n\u003cp\u003eThe dry cut diamond core drill is designed to be used without water to drill \r\ninto:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\t\u003cli\u003eConcrete\u003c\/li\u003e\r\n\t\u003cli\u003eConcrete pipes\u003c\/li\u003e\r\n\t\u003cli\u003eBrickwork\u003c\/li\u003e\r\n\t\u003cli\u003eRoof tiles\u003c\/li\u003e\r\n\t\u003cli\u003eSlate\u003c\/li\u003e\r\n\t\u003cli\u003eStone\u003c\/li\u003e\r\n\t\u003cli\u003ePaving\u003c\/li\u003e\r\n\t\u003cli\u003eTarmac\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\r\n\u003cp\u003eIt allows the user to drill neat and clean holes quickly without the setup an cleanup time associated with using a water-cooled drilling jig.\u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp class=\"info-products\"\u003e\u003cstrong\u003eINFORMATION:\u003c\/strong\u003e\u003cbr\u003e\r\nHave a look at the different adaptors under the EXTRA INFO tab and the complete \r\nrange under the ACCESSORIES tab.\u003c\/p\u003e\r\n\u003cp class=\"attention-products\"\u003e\u003cstrong\u003eIMPORTANT:\u003c\/strong\u003e\u003cbr\u003e\r\nNot for reinforced drilling! Use a wall scanner to detect reinforcing, water \r\npipes or electrical conduit.\u003c\/p\u003e\r\n\u003cp\u003e\r\n\u003cimg height=\"62\" src=\"http:\/\/www.vermontsales.co.za\/images\/torkcraft\/drillbits\/diamond\/formula_diamond_lg1.jpg\" width=\"565\"\u003e\u003c\/p\u003e\r\n"}
DIAMOND CORE BIT 117 X 150MM UNIVERSAL PURPOSE M16
R 1,399.00
{"id":9892819142,"title":"DIAMOND CORE BIT 117 X 150MM UNIVERSAL PURPOSE M16","handle":"diamond-core-bit-117-x-150mm-universal-purpose-m16","description":"\u003c!-- Product header --\u003e\r\n\u003cdiv id=\"tc-desc-header\"\u003e\r\n\t\u003cspan class=\"description-headingBox\"\u003eDry Cut Diamond Core Drill\u003c\/span\u003e\n\u003c\/div\u003e\r\n\u003cp class=\"note_box\"\u003eFor plumbers, electricians or general contractors needing to \r\ndrill a hole quickly and cleanly in brickwork for an installation.\u003c\/p\u003e\r\n\r\n\r\n\u003cimg height=\"354\" src=\"http:\/\/www.vermontsales.co.za\/images\/torkcraft\/drillbits\/diamond\/tc1800_brickwork_sm1.jpg\" style=\"float: right;margin-left:5px\" width=\"275\"\u003e\u003cp class=\"feature_box\" style=\"width: 260px; text-align: left;\"\u003e\r\n\u003cstrong\u003e\r\nCore diameter:\u003c\/strong\u003e Ø117mm\u003cbr\u003e\r\n\u003cstrong\u003eDepth:\u003c\/strong\u003e 170mm\u003cbr\u003e\r\n\u003cstrong\u003eAdaptor thread:\u003c\/strong\u003e M16\u003cbr\u003e\r\n\u003cstrong\u003eMain use:\u003c\/strong\u003e Brickwork\u003c\/p\u003e\r\n\u003ch4\u003eApplication:\u003c\/h4\u003e\r\n\u003cp\u003eThe dry cut diamond core drill is designed to be used without water to drill \r\ninto:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\t\u003cli\u003eBrickwork\u003c\/li\u003e\r\n\t\u003cli\u003eRoof tiles\u003c\/li\u003e\r\n\t\u003cli\u003eSlate\u003c\/li\u003e\r\n\t\u003cli\u003eStone\u003c\/li\u003e\r\n\t\u003cli\u003ePaving\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\r\n\u003cp\u003eIt allows the user to drill neat and clean holes quickly without the setup an cleanup time associated with using a water-cooled drilling jig.\u003c\/p\u003e\r\n\u003cp class=\"info-products\"\u003e\u003cstrong\u003eINFORMATION:\u003c\/strong\u003e\u003cbr\u003e\r\nHave a look at the different adaptors under the EXTRA INFO tab and the complete \r\nrange under the ACCESSORIES tab.\u003c\/p\u003e\r\n\u003cp class=\"attention-products\"\u003e\u003cstrong\u003eIMPORTANT:\u003c\/strong\u003e\u003cbr\u003e\r\nNot for reinforced drilling! Use a wall scanner to detect reinforcing, water \r\npipes or electrical conduit.\u003c\/p\u003e\r\n\u003cp\u003e\r\n\u003cimg height=\"62\" src=\"http:\/\/www.vermontsales.co.za\/images\/torkcraft\/drillbits\/diamond\/formula_diamond_lg1.jpg\" width=\"565\"\u003e\u003c\/p\u003e\r\n","published_at":"2017-03-08T20:10:30-05:00","created_at":"2017-03-08T20:10:33-05:00","vendor":"TORK CRAFT","type":"Misc","tags":["Diamond core bit","Drill bits"],"price":139900,"price_min":139900,"price_max":139900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":37796187974,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"TC180117","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"DIAMOND CORE BIT 117 X 150MM UNIVERSAL PURPOSE M16","public_title":null,"options":["Default Title"],"price":139900,"weight":1755,"compare_at_price":null,"inventory_quantity":18,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/wwbits.myshopify.com\/cdn\/shop\/products\/TC180117.jpg?v=1489021833"],"featured_image":"\/\/wwbits.myshopify.com\/cdn\/shop\/products\/TC180117.jpg?v=1489021833","options":["Title"],"media":[{"alt":"DIAMOND CORE BIT 117 X 150MM UNIVERSAL PURPOSE M16","id":522397581347,"position":1,"preview_image":{"aspect_ratio":1.04,"height":350,"width":364,"src":"\/\/wwbits.myshopify.com\/cdn\/shop\/products\/TC180117.jpg?v=1489021833"},"aspect_ratio":1.04,"height":350,"media_type":"image","src":"\/\/wwbits.myshopify.com\/cdn\/shop\/products\/TC180117.jpg?v=1489021833","width":364}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003c!-- Product header --\u003e\r\n\u003cdiv id=\"tc-desc-header\"\u003e\r\n\t\u003cspan class=\"description-headingBox\"\u003eDry Cut Diamond Core Drill\u003c\/span\u003e\n\u003c\/div\u003e\r\n\u003cp class=\"note_box\"\u003eFor plumbers, electricians or general contractors needing to \r\ndrill a hole quickly and cleanly in brickwork for an installation.\u003c\/p\u003e\r\n\r\n\r\n\u003cimg height=\"354\" src=\"http:\/\/www.vermontsales.co.za\/images\/torkcraft\/drillbits\/diamond\/tc1800_brickwork_sm1.jpg\" style=\"float: right;margin-left:5px\" width=\"275\"\u003e\u003cp class=\"feature_box\" style=\"width: 260px; text-align: left;\"\u003e\r\n\u003cstrong\u003e\r\nCore diameter:\u003c\/strong\u003e Ø117mm\u003cbr\u003e\r\n\u003cstrong\u003eDepth:\u003c\/strong\u003e 170mm\u003cbr\u003e\r\n\u003cstrong\u003eAdaptor thread:\u003c\/strong\u003e M16\u003cbr\u003e\r\n\u003cstrong\u003eMain use:\u003c\/strong\u003e Brickwork\u003c\/p\u003e\r\n\u003ch4\u003eApplication:\u003c\/h4\u003e\r\n\u003cp\u003eThe dry cut diamond core drill is designed to be used without water to drill \r\ninto:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\t\u003cli\u003eBrickwork\u003c\/li\u003e\r\n\t\u003cli\u003eRoof tiles\u003c\/li\u003e\r\n\t\u003cli\u003eSlate\u003c\/li\u003e\r\n\t\u003cli\u003eStone\u003c\/li\u003e\r\n\t\u003cli\u003ePaving\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\r\n\u003cp\u003eIt allows the user to drill neat and clean holes quickly without the setup an cleanup time associated with using a water-cooled drilling jig.\u003c\/p\u003e\r\n\u003cp class=\"info-products\"\u003e\u003cstrong\u003eINFORMATION:\u003c\/strong\u003e\u003cbr\u003e\r\nHave a look at the different adaptors under the EXTRA INFO tab and the complete \r\nrange under the ACCESSORIES tab.\u003c\/p\u003e\r\n\u003cp class=\"attention-products\"\u003e\u003cstrong\u003eIMPORTANT:\u003c\/strong\u003e\u003cbr\u003e\r\nNot for reinforced drilling! Use a wall scanner to detect reinforcing, water \r\npipes or electrical conduit.\u003c\/p\u003e\r\n\u003cp\u003e\r\n\u003cimg height=\"62\" src=\"http:\/\/www.vermontsales.co.za\/images\/torkcraft\/drillbits\/diamond\/formula_diamond_lg1.jpg\" width=\"565\"\u003e\u003c\/p\u003e\r\n"}
DIAMOND CORE BIT 117X150MM CONCRETE M22
R 1,399.00
{"id":9892819590,"title":"DIAMOND CORE BIT 117X150MM CONCRETE M22","handle":"diamond-core-bit-117x150mm-concrete-m22","description":"\u003c!-- Product header --\u003e\r\n\u003cdiv id=\"tc-desc-header\"\u003e\r\n\t\u003cspan class=\"description-headingBox\"\u003eDry Cut Diamond Core Drill\u003c\/span\u003e\n\u003c\/div\u003e\r\n\u003cp class=\"note_box\"\u003eFor plumbers, electricians or general contractors needing to \r\ndrill a hole quickly and cleanly in concrete for an installation.\u003c\/p\u003e\r\n\r\n\r\n\u003cimg height=\"514\" src=\"http:\/\/www.vermontsales.co.za\/images\/torkcraft\/drillbits\/diamond\/tc1800_concrete_sm1.jpg\" style=\"float: right;margin-left:10px\" width=\"275\"\u003e\u003cp class=\"feature_box\" style=\"width: 260px; text-align: left;\"\u003e\r\n\u003cstrong\u003e\r\nCore diameter:\u003c\/strong\u003e Ø117mm\u003cbr\u003e\r\n\u003cstrong\u003eDepth:\u003c\/strong\u003e 170mm\u003cbr\u003e\r\n\u003cstrong\u003eAdaptor thread:\u003c\/strong\u003e M22\u003cbr\u003e\r\n\u003cstrong\u003eMain use:\u003c\/strong\u003e Concrete\u003c\/p\u003e\r\n\u003ch4\u003eApplication:\u003c\/h4\u003e\r\n\u003cp\u003eThe dry cut diamond core drill is designed to be used without water to drill \r\ninto:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\t\u003cli\u003eConcrete\u003c\/li\u003e\r\n\t\u003cli\u003eConcrete pipes\u003c\/li\u003e\r\n\t\u003cli\u003eBrickwork\u003c\/li\u003e\r\n\t\u003cli\u003eRoof tiles\u003c\/li\u003e\r\n\t\u003cli\u003eSlate\u003c\/li\u003e\r\n\t\u003cli\u003eStone\u003c\/li\u003e\r\n\t\u003cli\u003ePaving\u003c\/li\u003e\r\n\t\u003cli\u003eTarmac\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\r\n\u003cp\u003eIt allows the user to drill neat and clean holes quickly without the setup an cleanup time associated with using a water-cooled drilling jig.\u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp class=\"info-products\"\u003e\u003cstrong\u003eINFORMATION:\u003c\/strong\u003e\u003cbr\u003e\r\nHave a look at the different adaptors under the EXTRA INFO tab and the complete \r\nrange under the ACCESSORIES tab.\u003c\/p\u003e\r\n\u003cp class=\"attention-products\"\u003e\u003cstrong\u003eIMPORTANT:\u003c\/strong\u003e\u003cbr\u003e\r\nNot for reinforced drilling! Use a wall scanner to detect reinforcing, water \r\npipes or electrical conduit.\u003c\/p\u003e\r\n\u003cp\u003e\r\n\u003cimg height=\"62\" src=\"http:\/\/www.vermontsales.co.za\/images\/torkcraft\/drillbits\/diamond\/formula_diamond_lg1.jpg\" width=\"565\"\u003e\u003c\/p\u003e\r\n","published_at":"2017-03-08T20:10:33-05:00","created_at":"2017-03-08T20:10:36-05:00","vendor":"TORK CRAFT","type":"Other","tags":["Diamond core bit","Drill bits"],"price":139900,"price_min":139900,"price_max":139900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":37796193542,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"TC180117-2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"DIAMOND CORE BIT 117X150MM CONCRETE M22","public_title":null,"options":["Default Title"],"price":139900,"weight":1780,"compare_at_price":null,"inventory_quantity":13,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/wwbits.myshopify.com\/cdn\/shop\/products\/TC180117-2.jpg?v=1489021837"],"featured_image":"\/\/wwbits.myshopify.com\/cdn\/shop\/products\/TC180117-2.jpg?v=1489021837","options":["Title"],"media":[{"alt":"DIAMOND CORE BIT 117X150MM CONCRETE M22","id":522397614115,"position":1,"preview_image":{"aspect_ratio":1.0,"height":350,"width":350,"src":"\/\/wwbits.myshopify.com\/cdn\/shop\/products\/TC180117-2.jpg?v=1489021837"},"aspect_ratio":1.0,"height":350,"media_type":"image","src":"\/\/wwbits.myshopify.com\/cdn\/shop\/products\/TC180117-2.jpg?v=1489021837","width":350}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003c!-- Product header --\u003e\r\n\u003cdiv id=\"tc-desc-header\"\u003e\r\n\t\u003cspan class=\"description-headingBox\"\u003eDry Cut Diamond Core Drill\u003c\/span\u003e\n\u003c\/div\u003e\r\n\u003cp class=\"note_box\"\u003eFor plumbers, electricians or general contractors needing to \r\ndrill a hole quickly and cleanly in concrete for an installation.\u003c\/p\u003e\r\n\r\n\r\n\u003cimg height=\"514\" src=\"http:\/\/www.vermontsales.co.za\/images\/torkcraft\/drillbits\/diamond\/tc1800_concrete_sm1.jpg\" style=\"float: right;margin-left:10px\" width=\"275\"\u003e\u003cp class=\"feature_box\" style=\"width: 260px; text-align: left;\"\u003e\r\n\u003cstrong\u003e\r\nCore diameter:\u003c\/strong\u003e Ø117mm\u003cbr\u003e\r\n\u003cstrong\u003eDepth:\u003c\/strong\u003e 170mm\u003cbr\u003e\r\n\u003cstrong\u003eAdaptor thread:\u003c\/strong\u003e M22\u003cbr\u003e\r\n\u003cstrong\u003eMain use:\u003c\/strong\u003e Concrete\u003c\/p\u003e\r\n\u003ch4\u003eApplication:\u003c\/h4\u003e\r\n\u003cp\u003eThe dry cut diamond core drill is designed to be used without water to drill \r\ninto:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\t\u003cli\u003eConcrete\u003c\/li\u003e\r\n\t\u003cli\u003eConcrete pipes\u003c\/li\u003e\r\n\t\u003cli\u003eBrickwork\u003c\/li\u003e\r\n\t\u003cli\u003eRoof tiles\u003c\/li\u003e\r\n\t\u003cli\u003eSlate\u003c\/li\u003e\r\n\t\u003cli\u003eStone\u003c\/li\u003e\r\n\t\u003cli\u003ePaving\u003c\/li\u003e\r\n\t\u003cli\u003eTarmac\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\r\n\u003cp\u003eIt allows the user to drill neat and clean holes quickly without the setup an cleanup time associated with using a water-cooled drilling jig.\u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp class=\"info-products\"\u003e\u003cstrong\u003eINFORMATION:\u003c\/strong\u003e\u003cbr\u003e\r\nHave a look at the different adaptors under the EXTRA INFO tab and the complete \r\nrange under the ACCESSORIES tab.\u003c\/p\u003e\r\n\u003cp class=\"attention-products\"\u003e\u003cstrong\u003eIMPORTANT:\u003c\/strong\u003e\u003cbr\u003e\r\nNot for reinforced drilling! Use a wall scanner to detect reinforcing, water \r\npipes or electrical conduit.\u003c\/p\u003e\r\n\u003cp\u003e\r\n\u003cimg height=\"62\" src=\"http:\/\/www.vermontsales.co.za\/images\/torkcraft\/drillbits\/diamond\/formula_diamond_lg1.jpg\" width=\"565\"\u003e\u003c\/p\u003e\r\n"}
DIAMOND CORE BIT 12MM FOR TILES
R 99.80
{"id":9892823494,"title":"DIAMOND CORE BIT 12MM FOR TILES","handle":"diamond-core-bit-12mm-for-tiles","description":"\u003c!-- Product header --\u003e\r\n\u003cdiv id=\"tc-desc-header\"\u003e\r\n\t\u003cspan class=\"description-headingBox\"\u003eØ10mm Diamond core bit\u003c\/span\u003e\n\u003c\/div\u003e\r\n\u003ch4\u003e\r\n\u003cimg height=\"402\" src=\"http:\/\/www.vermontsales.co.za\/images\/torkcraft\/drillbits\/diamond\/tc1808_sm1.jpg\" style=\"float: right;margin-bottom:10px\" width=\"275\"\u003eApplication:\u003c\/h4\u003e\r\n\u003cp\u003eThe diamond core bit is used to drill holes in:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\t\u003cli\u003eCeramic tiles\u003c\/li\u003e\r\n\t\u003cli\u003eMarble\u003c\/li\u003e\r\n\t\u003cli\u003eGrade 5 porcelain (hardest)\u003c\/li\u003e\r\n\t\u003cli\u003eGranite\u003c\/li\u003e\r\n\t\u003cli\u003eGlass\u003c\/li\u003e\r\n\t\u003cli\u003eSlate\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003eThe diamond core cuts faster, smoother and lasts longer than any other core \r\ndrills.\u003c\/p\u003e\r\n\u003ch4\u003eHow to use the diamond core bit:\u003c\/h4\u003e\r\n\u003cp\u003eThe diamond core drill bit must be used with water at all times when \r\ndrilling. The water serves as a coolant to prevent the diamonds from \r\noverheating. The maximum allowable temperature for a diamond core bit is 500°C.\u003c\/p\u003e\r\n\u003cp\u003eThere is no pilot drill with the diamond core bit. A low rpm rotary drill \r\nwith a planetary gearbox is required to be used with a diamond core bit. It is \r\npossible to use a cordless drill, but in the lowest gear setting. No hammer \r\naction is used.\u003c\/p\u003e\r\n\u003col\u003e\r\n\t\u003cli\u003eTightly fasten the diamond core bit in the drill's chuck.\u003c\/li\u003e\r\n\t\u003cli\u003eKeep the bit steady at a 45?ø angle \r\n\twith the starting point on the edge of the assigned area to be \r\n\tdrilled whilst the bit is rotating.\u003c\/li\u003e\r\n\t\u003cli\u003eA notch will be made (this is normal). \r\n\tGradually move the drill from 45° to 90° and continue drilling until \r\n\tfinished.\u003c\/li\u003e\r\n\t\u003cli\u003eAllow the diamond core bit to cool down completely before proceeding to \r\n\tdrill another hole.\u003c\/li\u003e\r\n\u003c\/ol\u003e\r\n\u003cp\u003eWater can be applied by:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\t\u003cli\u003espraying water on the surface,\u003c\/li\u003e\r\n\t\u003cli\u003eusing a wet sponge,\u003c\/li\u003e\r\n\t\u003cli\u003eattaching a water feed device. This is necessary when drilling into a \r\n\twall tile.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp class=\"info-products\"\u003ePlease have a look at the video in the tabs above \r\nshowing how to use the diamond core bit.\u003c\/p\u003e\r\n\u003ch4\u003eAn indication of the correct spindle speed:\u003c\/h4\u003e\r\n\u003ctable class=\"SpecsTable\" style=\"width: 100%\"\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecHeading\" style=\"width: 50%\"\u003eDIAMOND CORE BIT DIAMETER\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecHeading\" style=\"width: 50%\"\u003eSPINDLE SPEED\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??5.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e800 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??6.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e600 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??7.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e500 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??8.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e500 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003eØ10.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e400 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003eMore than Ø12.0mm (\u0026gt;10.0mm)\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003eless than 400 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\u003c\/table\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp class=\"attention-products\"\u003e\u003cstrong\u003eIMPORTANT:\u003c\/strong\u003e\u003cbr\u003e\r\nThe tool life will mostly depend on the proper usage and the hardness of the items \r\ndrilled into. It is normal for a diamond core bit to last up to 10 or more \r\ndrilled holes in hard tiles. Please remember to \u003cstrong\u003ealways\u003c\/strong\u003e use \r\nwater when drilling with diamond core bits.\u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n","published_at":"2017-03-08T20:11:02-05:00","created_at":"2017-03-08T20:11:06-05:00","vendor":"TORK CRAFT","type":"Diamond Core Bit","tags":["Diamond core bit","Drill bits"],"price":9980,"price_min":9980,"price_max":9980,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":37796271110,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"TC180812","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"DIAMOND CORE BIT 12MM FOR TILES","public_title":null,"options":["Default Title"],"price":9980,"weight":28,"compare_at_price":null,"inventory_quantity":1020,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/wwbits.myshopify.com\/cdn\/shop\/products\/TC180812.jpg?v=1489021866"],"featured_image":"\/\/wwbits.myshopify.com\/cdn\/shop\/products\/TC180812.jpg?v=1489021866","options":["Title"],"media":[{"alt":"DIAMOND CORE BIT 12MM FOR TILES","id":522397941795,"position":1,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/wwbits.myshopify.com\/cdn\/shop\/products\/TC180812.jpg?v=1489021866"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/wwbits.myshopify.com\/cdn\/shop\/products\/TC180812.jpg?v=1489021866","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003c!-- Product header --\u003e\r\n\u003cdiv id=\"tc-desc-header\"\u003e\r\n\t\u003cspan class=\"description-headingBox\"\u003eØ10mm Diamond core bit\u003c\/span\u003e\n\u003c\/div\u003e\r\n\u003ch4\u003e\r\n\u003cimg height=\"402\" src=\"http:\/\/www.vermontsales.co.za\/images\/torkcraft\/drillbits\/diamond\/tc1808_sm1.jpg\" style=\"float: right;margin-bottom:10px\" width=\"275\"\u003eApplication:\u003c\/h4\u003e\r\n\u003cp\u003eThe diamond core bit is used to drill holes in:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\t\u003cli\u003eCeramic tiles\u003c\/li\u003e\r\n\t\u003cli\u003eMarble\u003c\/li\u003e\r\n\t\u003cli\u003eGrade 5 porcelain (hardest)\u003c\/li\u003e\r\n\t\u003cli\u003eGranite\u003c\/li\u003e\r\n\t\u003cli\u003eGlass\u003c\/li\u003e\r\n\t\u003cli\u003eSlate\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003eThe diamond core cuts faster, smoother and lasts longer than any other core \r\ndrills.\u003c\/p\u003e\r\n\u003ch4\u003eHow to use the diamond core bit:\u003c\/h4\u003e\r\n\u003cp\u003eThe diamond core drill bit must be used with water at all times when \r\ndrilling. The water serves as a coolant to prevent the diamonds from \r\noverheating. The maximum allowable temperature for a diamond core bit is 500°C.\u003c\/p\u003e\r\n\u003cp\u003eThere is no pilot drill with the diamond core bit. A low rpm rotary drill \r\nwith a planetary gearbox is required to be used with a diamond core bit. It is \r\npossible to use a cordless drill, but in the lowest gear setting. No hammer \r\naction is used.\u003c\/p\u003e\r\n\u003col\u003e\r\n\t\u003cli\u003eTightly fasten the diamond core bit in the drill's chuck.\u003c\/li\u003e\r\n\t\u003cli\u003eKeep the bit steady at a 45?ø angle \r\n\twith the starting point on the edge of the assigned area to be \r\n\tdrilled whilst the bit is rotating.\u003c\/li\u003e\r\n\t\u003cli\u003eA notch will be made (this is normal). \r\n\tGradually move the drill from 45° to 90° and continue drilling until \r\n\tfinished.\u003c\/li\u003e\r\n\t\u003cli\u003eAllow the diamond core bit to cool down completely before proceeding to \r\n\tdrill another hole.\u003c\/li\u003e\r\n\u003c\/ol\u003e\r\n\u003cp\u003eWater can be applied by:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\t\u003cli\u003espraying water on the surface,\u003c\/li\u003e\r\n\t\u003cli\u003eusing a wet sponge,\u003c\/li\u003e\r\n\t\u003cli\u003eattaching a water feed device. This is necessary when drilling into a \r\n\twall tile.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp class=\"info-products\"\u003ePlease have a look at the video in the tabs above \r\nshowing how to use the diamond core bit.\u003c\/p\u003e\r\n\u003ch4\u003eAn indication of the correct spindle speed:\u003c\/h4\u003e\r\n\u003ctable class=\"SpecsTable\" style=\"width: 100%\"\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecHeading\" style=\"width: 50%\"\u003eDIAMOND CORE BIT DIAMETER\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecHeading\" style=\"width: 50%\"\u003eSPINDLE SPEED\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??5.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e800 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??6.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e600 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??7.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e500 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??8.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e500 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003eØ10.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e400 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003eMore than Ø12.0mm (\u0026gt;10.0mm)\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003eless than 400 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\u003c\/table\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp class=\"attention-products\"\u003e\u003cstrong\u003eIMPORTANT:\u003c\/strong\u003e\u003cbr\u003e\r\nThe tool life will mostly depend on the proper usage and the hardness of the items \r\ndrilled into. It is normal for a diamond core bit to last up to 10 or more \r\ndrilled holes in hard tiles. Please remember to \u003cstrong\u003ealways\u003c\/strong\u003e use \r\nwater when drilling with diamond core bits.\u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n"}
DIAMOND CORE BIT 14MM FOR TILES
Sold Out
{"id":9892825030,"title":"DIAMOND CORE BIT 14MM FOR TILES","handle":"diamond-core-bit-14mm-for-tiles","description":"\u003c!-- Product header --\u003e\r\n\u003cdiv id=\"tc-desc-header\"\u003e\r\n\t\u003cspan class=\"description-headingBox\"\u003eØ14mm Diamond core bit\u003c\/span\u003e\n\u003c\/div\u003e\r\n\u003ch4\u003e\r\n\u003cimg height=\"402\" src=\"http:\/\/www.vermontsales.co.za\/images\/torkcraft\/drillbits\/diamond\/tc1808_sm1.jpg\" style=\"float: right;margin-bottom:10px\" width=\"275\"\u003eApplication:\u003c\/h4\u003e\r\n\u003cp\u003eThe diamond core bit is used to drill holes in:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\t\u003cli\u003eCeramic tiles\u003c\/li\u003e\r\n\t\u003cli\u003eMarble\u003c\/li\u003e\r\n\t\u003cli\u003eGrade 5 porcelain (hardest)\u003c\/li\u003e\r\n\t\u003cli\u003eGranite\u003c\/li\u003e\r\n\t\u003cli\u003eGlass\u003c\/li\u003e\r\n\t\u003cli\u003eSlate\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003eThe diamond core cuts faster, smoother and lasts longer than any other core \r\ndrills.\u003c\/p\u003e\r\n\u003ch4\u003eHow to use the diamond core bit:\u003c\/h4\u003e\r\n\u003cp\u003eThe diamond core drill bit must be used with water at all times when \r\ndrilling. The water serves as a coolant to prevent the diamonds from \r\noverheating. The maximum allowable temperature for a diamond core bit is 500°C.\u003c\/p\u003e\r\n\u003cp\u003eThere is no pilot drill with the diamond core bit. A low rpm rotary drill \r\nwith a planetary gearbox is required to be used with a diamond core bit. It is \r\npossible to use a cordless drill, but in the lowest gear setting. No hammer \r\naction is used.\u003c\/p\u003e\r\n\u003col\u003e\r\n\t\u003cli\u003eTightly fasten the diamond core bit in the drill's chuck.\u003c\/li\u003e\r\n\t\u003cli\u003eKeep the bit steady at a 45?ø angle \r\n\twith the starting point on the edge of the assigned area to be \r\n\tdrilled whilst the bit is rotating.\u003c\/li\u003e\r\n\t\u003cli\u003eA notch will be made (this is normal). \r\n\tGradually move the drill from 45° to 90° and continue drilling until \r\n\tfinished.\u003c\/li\u003e\r\n\t\u003cli\u003eAllow the diamond core bit to cool down completely before proceeding to \r\n\tdrill another hole.\u003c\/li\u003e\r\n\u003c\/ol\u003e\r\n\u003cp\u003eWater can be applied by:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\t\u003cli\u003espraying water on the surface,\u003c\/li\u003e\r\n\t\u003cli\u003eusing a wet sponge,\u003c\/li\u003e\r\n\t\u003cli\u003eattaching a water feed device. This is necessary when drilling into a \r\n\twall tile.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp class=\"info-products\"\u003ePlease have a look at the video in the tabs above \r\nshowing how to use the diamond core bit.\u003c\/p\u003e\r\n\u003ch4\u003eAn indication of the correct spindle speed:\u003c\/h4\u003e\r\n\u003ctable class=\"SpecsTable\" style=\"width: 100%\"\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecHeading\" style=\"width: 50%\"\u003eDIAMOND CORE BIT DIAMETER\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecHeading\" style=\"width: 50%\"\u003eSPINDLE SPEED\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??5.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e800 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??6.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e600 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??7.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e500 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??8.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e500 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003eØ10.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e400 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003eMore than Ø10.0mm (\u0026gt;10.0mm)\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003eless than 400 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\u003c\/table\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp class=\"attention-products\"\u003e\u003cstrong\u003eIMPORTANT:\u003c\/strong\u003e\u003cbr\u003e\r\nThe tool life will mostly depend on the proper usage and the hardness of the items \r\ndrilled into. It is normal for a diamond core bit to last up to 10 or more \r\ndrilled holes in hard tiles. Please remember to \u003cstrong\u003ealways\u003c\/strong\u003e use \r\nwater when drilling with diamond core bits.\u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n","published_at":"2017-03-08T20:11:11-05:00","created_at":"2017-03-08T20:11:13-05:00","vendor":"TORK CRAFT","type":"Diamond Core Bit","tags":["Diamond core bit","Drill bits"],"price":13500,"price_min":13500,"price_max":13500,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":37796286214,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"TC180814","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"DIAMOND CORE BIT 14MM FOR TILES","public_title":null,"options":["Default Title"],"price":13500,"weight":34,"compare_at_price":null,"inventory_quantity":-43,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/wwbits.myshopify.com\/cdn\/shop\/products\/TC180814.jpg?v=1489021873"],"featured_image":"\/\/wwbits.myshopify.com\/cdn\/shop\/products\/TC180814.jpg?v=1489021873","options":["Title"],"media":[{"alt":"DIAMOND CORE BIT 14MM FOR TILES","id":522398040099,"position":1,"preview_image":{"aspect_ratio":2.36,"height":350,"width":826,"src":"\/\/wwbits.myshopify.com\/cdn\/shop\/products\/TC180814.jpg?v=1489021873"},"aspect_ratio":2.36,"height":350,"media_type":"image","src":"\/\/wwbits.myshopify.com\/cdn\/shop\/products\/TC180814.jpg?v=1489021873","width":826}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003c!-- Product header --\u003e\r\n\u003cdiv id=\"tc-desc-header\"\u003e\r\n\t\u003cspan class=\"description-headingBox\"\u003eØ14mm Diamond core bit\u003c\/span\u003e\n\u003c\/div\u003e\r\n\u003ch4\u003e\r\n\u003cimg height=\"402\" src=\"http:\/\/www.vermontsales.co.za\/images\/torkcraft\/drillbits\/diamond\/tc1808_sm1.jpg\" style=\"float: right;margin-bottom:10px\" width=\"275\"\u003eApplication:\u003c\/h4\u003e\r\n\u003cp\u003eThe diamond core bit is used to drill holes in:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\t\u003cli\u003eCeramic tiles\u003c\/li\u003e\r\n\t\u003cli\u003eMarble\u003c\/li\u003e\r\n\t\u003cli\u003eGrade 5 porcelain (hardest)\u003c\/li\u003e\r\n\t\u003cli\u003eGranite\u003c\/li\u003e\r\n\t\u003cli\u003eGlass\u003c\/li\u003e\r\n\t\u003cli\u003eSlate\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003eThe diamond core cuts faster, smoother and lasts longer than any other core \r\ndrills.\u003c\/p\u003e\r\n\u003ch4\u003eHow to use the diamond core bit:\u003c\/h4\u003e\r\n\u003cp\u003eThe diamond core drill bit must be used with water at all times when \r\ndrilling. The water serves as a coolant to prevent the diamonds from \r\noverheating. The maximum allowable temperature for a diamond core bit is 500°C.\u003c\/p\u003e\r\n\u003cp\u003eThere is no pilot drill with the diamond core bit. A low rpm rotary drill \r\nwith a planetary gearbox is required to be used with a diamond core bit. It is \r\npossible to use a cordless drill, but in the lowest gear setting. No hammer \r\naction is used.\u003c\/p\u003e\r\n\u003col\u003e\r\n\t\u003cli\u003eTightly fasten the diamond core bit in the drill's chuck.\u003c\/li\u003e\r\n\t\u003cli\u003eKeep the bit steady at a 45?ø angle \r\n\twith the starting point on the edge of the assigned area to be \r\n\tdrilled whilst the bit is rotating.\u003c\/li\u003e\r\n\t\u003cli\u003eA notch will be made (this is normal). \r\n\tGradually move the drill from 45° to 90° and continue drilling until \r\n\tfinished.\u003c\/li\u003e\r\n\t\u003cli\u003eAllow the diamond core bit to cool down completely before proceeding to \r\n\tdrill another hole.\u003c\/li\u003e\r\n\u003c\/ol\u003e\r\n\u003cp\u003eWater can be applied by:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\t\u003cli\u003espraying water on the surface,\u003c\/li\u003e\r\n\t\u003cli\u003eusing a wet sponge,\u003c\/li\u003e\r\n\t\u003cli\u003eattaching a water feed device. This is necessary when drilling into a \r\n\twall tile.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp class=\"info-products\"\u003ePlease have a look at the video in the tabs above \r\nshowing how to use the diamond core bit.\u003c\/p\u003e\r\n\u003ch4\u003eAn indication of the correct spindle speed:\u003c\/h4\u003e\r\n\u003ctable class=\"SpecsTable\" style=\"width: 100%\"\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecHeading\" style=\"width: 50%\"\u003eDIAMOND CORE BIT DIAMETER\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecHeading\" style=\"width: 50%\"\u003eSPINDLE SPEED\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??5.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e800 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??6.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e600 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??7.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e500 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??8.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e500 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003eØ10.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e400 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003eMore than Ø10.0mm (\u0026gt;10.0mm)\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003eless than 400 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\u003c\/table\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp class=\"attention-products\"\u003e\u003cstrong\u003eIMPORTANT:\u003c\/strong\u003e\u003cbr\u003e\r\nThe tool life will mostly depend on the proper usage and the hardness of the items \r\ndrilled into. It is normal for a diamond core bit to last up to 10 or more \r\ndrilled holes in hard tiles. Please remember to \u003cstrong\u003ealways\u003c\/strong\u003e use \r\nwater when drilling with diamond core bits.\u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n"}
DIAMOND CORE BIT 15MM FOR TILES
R 139.00
{"id":9892825350,"title":"DIAMOND CORE BIT 15MM FOR TILES","handle":"diamond-core-bit-15mm-for-tiles","description":"\u003c!-- Product header --\u003e\r\n\u003cdiv id=\"tc-desc-header\"\u003e\r\n\t\u003cspan class=\"description-headingBox\"\u003eØ15mm Diamond core bit\u003c\/span\u003e\n\u003c\/div\u003e\r\n\u003ch4\u003e\r\n\u003cimg height=\"402\" src=\"http:\/\/www.vermontsales.co.za\/images\/torkcraft\/drillbits\/diamond\/tc1808_sm1.jpg\" style=\"float: right;margin-bottom:10px\" width=\"275\"\u003eApplication:\u003c\/h4\u003e\r\n\u003cp\u003eThe diamond core bit is used to drill holes in:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\t\u003cli\u003eCeramic tiles\u003c\/li\u003e\r\n\t\u003cli\u003eMarble\u003c\/li\u003e\r\n\t\u003cli\u003eGrade 5 porcelain (hardest)\u003c\/li\u003e\r\n\t\u003cli\u003eGranite\u003c\/li\u003e\r\n\t\u003cli\u003eGlass\u003c\/li\u003e\r\n\t\u003cli\u003eSlate\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003eThe diamond core cuts faster, smoother and lasts longer than any other core \r\ndrills.\u003c\/p\u003e\r\n\u003ch4\u003eHow to use the diamond core bit:\u003c\/h4\u003e\r\n\u003cp\u003eThe diamond core drill bit must be used with water at all times when \r\ndrilling. The water serves as a coolant to prevent the diamonds from \r\noverheating. The maximum allowable temperature for a diamond core bit is 500°C.\u003c\/p\u003e\r\n\u003cp\u003eThere is no pilot drill with the diamond core bit. A low rpm rotary drill \r\nwith a planetary gearbox is required to be used with a diamond core bit. It is \r\npossible to use a cordless drill, but in the lowest gear setting. No hammer \r\naction is used.\u003c\/p\u003e\r\n\u003col\u003e\r\n\t\u003cli\u003eTightly fasten the diamond core bit in the drill's chuck.\u003c\/li\u003e\r\n\t\u003cli\u003eKeep the bit steady at a 45?ø angle \r\n\twith the starting point on the edge of the assigned area to be \r\n\tdrilled whilst the bit is rotating.\u003c\/li\u003e\r\n\t\u003cli\u003eA notch will be made (this is normal). \r\n\tGradually move the drill from 45° to 90° and continue drilling until \r\n\tfinished.\u003c\/li\u003e\r\n\t\u003cli\u003eAllow the diamond core bit to cool down completely before proceeding to \r\n\tdrill another hole.\u003c\/li\u003e\r\n\u003c\/ol\u003e\r\n\u003cp\u003eWater can be applied by:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\t\u003cli\u003espraying water on the surface,\u003c\/li\u003e\r\n\t\u003cli\u003eusing a wet sponge,\u003c\/li\u003e\r\n\t\u003cli\u003eattaching a water feed device. This is necessary when drilling into a \r\n\twall tile.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp class=\"info-products\"\u003ePlease have a look at the video in the tabs above \r\nshowing how to use the diamond core bit.\u003c\/p\u003e\r\n\u003ch4\u003eAn indication of the correct spindle speed:\u003c\/h4\u003e\r\n\u003ctable class=\"SpecsTable\" style=\"width: 100%\"\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecHeading\" style=\"width: 50%\"\u003eDIAMOND CORE BIT DIAMETER\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecHeading\" style=\"width: 50%\"\u003eSPINDLE SPEED\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??5.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e800 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??6.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e600 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??7.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e500 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??8.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e500 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003eØ10.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e400 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003eMore than Ø10.0mm (\u0026gt;10.0mm)\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003eless than 400 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\u003c\/table\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp class=\"attention-products\"\u003e\u003cstrong\u003eIMPORTANT:\u003c\/strong\u003e\u003cbr\u003e\r\nThe tool life will mostly depend on the proper usage and the hardness of the items \r\ndrilled into. It is normal for a diamond core bit to last up to 10 or more \r\ndrilled holes in hard tiles. Please remember to \u003cstrong\u003ealways\u003c\/strong\u003e use \r\nwater when drilling with diamond core bits.\u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n","published_at":"2017-03-08T20:11:14-05:00","created_at":"2017-03-08T20:11:16-05:00","vendor":"TORK CRAFT","type":"Diamond Core Bit","tags":["Diamond core bit","Drill bits"],"price":13900,"price_min":13900,"price_max":13900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":37796287110,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"TC180815","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"DIAMOND CORE BIT 15MM FOR TILES","public_title":null,"options":["Default Title"],"price":13900,"weight":360,"compare_at_price":null,"inventory_quantity":239,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/wwbits.myshopify.com\/cdn\/shop\/products\/TC180815.jpg?v=1489021877"],"featured_image":"\/\/wwbits.myshopify.com\/cdn\/shop\/products\/TC180815.jpg?v=1489021877","options":["Title"],"media":[{"alt":"DIAMOND CORE BIT 15MM FOR TILES","id":522398072867,"position":1,"preview_image":{"aspect_ratio":1.88,"height":350,"width":658,"src":"\/\/wwbits.myshopify.com\/cdn\/shop\/products\/TC180815.jpg?v=1489021877"},"aspect_ratio":1.88,"height":350,"media_type":"image","src":"\/\/wwbits.myshopify.com\/cdn\/shop\/products\/TC180815.jpg?v=1489021877","width":658}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003c!-- Product header --\u003e\r\n\u003cdiv id=\"tc-desc-header\"\u003e\r\n\t\u003cspan class=\"description-headingBox\"\u003eØ15mm Diamond core bit\u003c\/span\u003e\n\u003c\/div\u003e\r\n\u003ch4\u003e\r\n\u003cimg height=\"402\" src=\"http:\/\/www.vermontsales.co.za\/images\/torkcraft\/drillbits\/diamond\/tc1808_sm1.jpg\" style=\"float: right;margin-bottom:10px\" width=\"275\"\u003eApplication:\u003c\/h4\u003e\r\n\u003cp\u003eThe diamond core bit is used to drill holes in:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\t\u003cli\u003eCeramic tiles\u003c\/li\u003e\r\n\t\u003cli\u003eMarble\u003c\/li\u003e\r\n\t\u003cli\u003eGrade 5 porcelain (hardest)\u003c\/li\u003e\r\n\t\u003cli\u003eGranite\u003c\/li\u003e\r\n\t\u003cli\u003eGlass\u003c\/li\u003e\r\n\t\u003cli\u003eSlate\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003eThe diamond core cuts faster, smoother and lasts longer than any other core \r\ndrills.\u003c\/p\u003e\r\n\u003ch4\u003eHow to use the diamond core bit:\u003c\/h4\u003e\r\n\u003cp\u003eThe diamond core drill bit must be used with water at all times when \r\ndrilling. The water serves as a coolant to prevent the diamonds from \r\noverheating. The maximum allowable temperature for a diamond core bit is 500°C.\u003c\/p\u003e\r\n\u003cp\u003eThere is no pilot drill with the diamond core bit. A low rpm rotary drill \r\nwith a planetary gearbox is required to be used with a diamond core bit. It is \r\npossible to use a cordless drill, but in the lowest gear setting. No hammer \r\naction is used.\u003c\/p\u003e\r\n\u003col\u003e\r\n\t\u003cli\u003eTightly fasten the diamond core bit in the drill's chuck.\u003c\/li\u003e\r\n\t\u003cli\u003eKeep the bit steady at a 45?ø angle \r\n\twith the starting point on the edge of the assigned area to be \r\n\tdrilled whilst the bit is rotating.\u003c\/li\u003e\r\n\t\u003cli\u003eA notch will be made (this is normal). \r\n\tGradually move the drill from 45° to 90° and continue drilling until \r\n\tfinished.\u003c\/li\u003e\r\n\t\u003cli\u003eAllow the diamond core bit to cool down completely before proceeding to \r\n\tdrill another hole.\u003c\/li\u003e\r\n\u003c\/ol\u003e\r\n\u003cp\u003eWater can be applied by:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\t\u003cli\u003espraying water on the surface,\u003c\/li\u003e\r\n\t\u003cli\u003eusing a wet sponge,\u003c\/li\u003e\r\n\t\u003cli\u003eattaching a water feed device. This is necessary when drilling into a \r\n\twall tile.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp class=\"info-products\"\u003ePlease have a look at the video in the tabs above \r\nshowing how to use the diamond core bit.\u003c\/p\u003e\r\n\u003ch4\u003eAn indication of the correct spindle speed:\u003c\/h4\u003e\r\n\u003ctable class=\"SpecsTable\" style=\"width: 100%\"\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecHeading\" style=\"width: 50%\"\u003eDIAMOND CORE BIT DIAMETER\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecHeading\" style=\"width: 50%\"\u003eSPINDLE SPEED\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??5.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e800 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??6.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e600 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??7.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e500 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??8.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e500 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003eØ10.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e400 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003eMore than Ø10.0mm (\u0026gt;10.0mm)\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003eless than 400 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\u003c\/table\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp class=\"attention-products\"\u003e\u003cstrong\u003eIMPORTANT:\u003c\/strong\u003e\u003cbr\u003e\r\nThe tool life will mostly depend on the proper usage and the hardness of the items \r\ndrilled into. It is normal for a diamond core bit to last up to 10 or more \r\ndrilled holes in hard tiles. Please remember to \u003cstrong\u003ealways\u003c\/strong\u003e use \r\nwater when drilling with diamond core bits.\u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n"}
DIAMOND CORE BIT 16MM FOR TILES
R 142.00
{"id":9892825926,"title":"DIAMOND CORE BIT 16MM FOR TILES","handle":"diamond-core-bit-16mm-for-tiles","description":"\u003c!-- Product header --\u003e\r\n\u003cdiv id=\"tc-desc-header\"\u003e\r\n\t\u003cspan class=\"description-headingBox\"\u003eØ16mm Diamond core bit\u003c\/span\u003e\n\u003c\/div\u003e\r\n\u003ch4\u003e\r\n\u003cimg height=\"402\" src=\"http:\/\/www.vermontsales.co.za\/images\/torkcraft\/drillbits\/diamond\/tc1808_sm1.jpg\" style=\"float: right;margin-bottom:10px\" width=\"275\"\u003eApplication:\u003c\/h4\u003e\r\n\u003cp\u003eThe diamond core bit is used to drill holes in:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\t\u003cli\u003eCeramic tiles\u003c\/li\u003e\r\n\t\u003cli\u003eMarble\u003c\/li\u003e\r\n\t\u003cli\u003eGrade 5 porcelain (hardest)\u003c\/li\u003e\r\n\t\u003cli\u003eGranite\u003c\/li\u003e\r\n\t\u003cli\u003eGlass\u003c\/li\u003e\r\n\t\u003cli\u003eSlate\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003eThe diamond core cuts faster, smoother and lasts longer than any other core \r\ndrills.\u003c\/p\u003e\r\n\u003ch4\u003eHow to use the diamond core bit:\u003c\/h4\u003e\r\n\u003cp\u003eThe diamond core drill bit must be used with water at all times when \r\ndrilling. The water serves as a coolant to prevent the diamonds from \r\noverheating. The maximum allowable temperature for a diamond core bit is 500°C.\u003c\/p\u003e\r\n\u003cp\u003eThere is no pilot drill with the diamond core bit. A low rpm rotary drill \r\nwith a planetary gearbox is required to be used with a diamond core bit. It is \r\npossible to use a cordless drill, but in the lowest gear setting. No hammer \r\naction is used.\u003c\/p\u003e\r\n\u003col\u003e\r\n\t\u003cli\u003eTightly fasten the diamond core bit in the drill's chuck.\u003c\/li\u003e\r\n\t\u003cli\u003eKeep the bit steady at a 45?ø angle \r\n\twith the starting point on the edge of the assigned area to be \r\n\tdrilled whilst the bit is rotating.\u003c\/li\u003e\r\n\t\u003cli\u003eA notch will be made (this is normal). \r\n\tGradually move the drill from 45° to 90° and continue drilling until \r\n\tfinished.\u003c\/li\u003e\r\n\t\u003cli\u003eAllow the diamond core bit to cool down completely before proceeding to \r\n\tdrill another hole.\u003c\/li\u003e\r\n\u003c\/ol\u003e\r\n\u003cp\u003eWater can be applied by:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\t\u003cli\u003espraying water on the surface,\u003c\/li\u003e\r\n\t\u003cli\u003eusing a wet sponge,\u003c\/li\u003e\r\n\t\u003cli\u003eattaching a water feed device. This is necessary when drilling into a \r\n\twall tile.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp class=\"info-products\"\u003ePlease have a look at the video in the tabs above \r\nshowing how to use the diamond core bit.\u003c\/p\u003e\r\n\u003ch4\u003eAn indication of the correct spindle speed:\u003c\/h4\u003e\r\n\u003ctable class=\"SpecsTable\" style=\"width: 100%\"\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecHeading\" style=\"width: 50%\"\u003eDIAMOND CORE BIT DIAMETER\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecHeading\" style=\"width: 50%\"\u003eSPINDLE SPEED\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??5.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e800 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??6.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e600 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??7.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e500 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??8.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e500 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003eØ10.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e400 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003eMore than Ø10.0mm (\u0026gt;10.0mm)\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003eless than 400 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\u003c\/table\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp class=\"attention-products\"\u003e\u003cstrong\u003eIMPORTANT:\u003c\/strong\u003e\u003cbr\u003e\r\nThe tool life will mostly depend on the proper usage and the hardness of the items \r\ndrilled into. It is normal for a diamond core bit to last up to 10 or more \r\ndrilled holes in hard tiles. Please remember to \u003cstrong\u003ealways\u003c\/strong\u003e use \r\nwater when drilling with diamond core bits.\u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n","published_at":"2017-03-08T20:11:17-05:00","created_at":"2017-03-08T20:11:19-05:00","vendor":"TORK CRAFT","type":"Diamond Core Bit","tags":["Diamond core bit","Drill bits"],"price":14200,"price_min":14200,"price_max":14200,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":37796295174,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"TC180816","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"DIAMOND CORE BIT 16MM FOR TILES","public_title":null,"options":["Default Title"],"price":14200,"weight":33,"compare_at_price":null,"inventory_quantity":639,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/wwbits.myshopify.com\/cdn\/shop\/products\/TC180816.jpg?v=1489021879"],"featured_image":"\/\/wwbits.myshopify.com\/cdn\/shop\/products\/TC180816.jpg?v=1489021879","options":["Title"],"media":[{"alt":"DIAMOND CORE BIT 16MM FOR TILES","id":522398105635,"position":1,"preview_image":{"aspect_ratio":1.88,"height":350,"width":658,"src":"\/\/wwbits.myshopify.com\/cdn\/shop\/products\/TC180816.jpg?v=1489021879"},"aspect_ratio":1.88,"height":350,"media_type":"image","src":"\/\/wwbits.myshopify.com\/cdn\/shop\/products\/TC180816.jpg?v=1489021879","width":658}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003c!-- Product header --\u003e\r\n\u003cdiv id=\"tc-desc-header\"\u003e\r\n\t\u003cspan class=\"description-headingBox\"\u003eØ16mm Diamond core bit\u003c\/span\u003e\n\u003c\/div\u003e\r\n\u003ch4\u003e\r\n\u003cimg height=\"402\" src=\"http:\/\/www.vermontsales.co.za\/images\/torkcraft\/drillbits\/diamond\/tc1808_sm1.jpg\" style=\"float: right;margin-bottom:10px\" width=\"275\"\u003eApplication:\u003c\/h4\u003e\r\n\u003cp\u003eThe diamond core bit is used to drill holes in:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\t\u003cli\u003eCeramic tiles\u003c\/li\u003e\r\n\t\u003cli\u003eMarble\u003c\/li\u003e\r\n\t\u003cli\u003eGrade 5 porcelain (hardest)\u003c\/li\u003e\r\n\t\u003cli\u003eGranite\u003c\/li\u003e\r\n\t\u003cli\u003eGlass\u003c\/li\u003e\r\n\t\u003cli\u003eSlate\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003eThe diamond core cuts faster, smoother and lasts longer than any other core \r\ndrills.\u003c\/p\u003e\r\n\u003ch4\u003eHow to use the diamond core bit:\u003c\/h4\u003e\r\n\u003cp\u003eThe diamond core drill bit must be used with water at all times when \r\ndrilling. The water serves as a coolant to prevent the diamonds from \r\noverheating. The maximum allowable temperature for a diamond core bit is 500°C.\u003c\/p\u003e\r\n\u003cp\u003eThere is no pilot drill with the diamond core bit. A low rpm rotary drill \r\nwith a planetary gearbox is required to be used with a diamond core bit. It is \r\npossible to use a cordless drill, but in the lowest gear setting. No hammer \r\naction is used.\u003c\/p\u003e\r\n\u003col\u003e\r\n\t\u003cli\u003eTightly fasten the diamond core bit in the drill's chuck.\u003c\/li\u003e\r\n\t\u003cli\u003eKeep the bit steady at a 45?ø angle \r\n\twith the starting point on the edge of the assigned area to be \r\n\tdrilled whilst the bit is rotating.\u003c\/li\u003e\r\n\t\u003cli\u003eA notch will be made (this is normal). \r\n\tGradually move the drill from 45° to 90° and continue drilling until \r\n\tfinished.\u003c\/li\u003e\r\n\t\u003cli\u003eAllow the diamond core bit to cool down completely before proceeding to \r\n\tdrill another hole.\u003c\/li\u003e\r\n\u003c\/ol\u003e\r\n\u003cp\u003eWater can be applied by:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\t\u003cli\u003espraying water on the surface,\u003c\/li\u003e\r\n\t\u003cli\u003eusing a wet sponge,\u003c\/li\u003e\r\n\t\u003cli\u003eattaching a water feed device. This is necessary when drilling into a \r\n\twall tile.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp class=\"info-products\"\u003ePlease have a look at the video in the tabs above \r\nshowing how to use the diamond core bit.\u003c\/p\u003e\r\n\u003ch4\u003eAn indication of the correct spindle speed:\u003c\/h4\u003e\r\n\u003ctable class=\"SpecsTable\" style=\"width: 100%\"\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecHeading\" style=\"width: 50%\"\u003eDIAMOND CORE BIT DIAMETER\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecHeading\" style=\"width: 50%\"\u003eSPINDLE SPEED\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??5.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e800 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??6.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e600 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??7.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e500 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003e??8.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e500 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003eØ10.0mm\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003e400 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\t\u003ctr\u003e\r\n\t\t\u003ctd class=\"SpecLeft\" style=\"width: 50%\"\u003eMore than Ø10.0mm (\u0026gt;10.0mm)\u003c\/td\u003e\r\n\t\t\u003ctd class=\"SpecRight\" style=\"width: 50%\"\u003eless than 400 rpm\u003c\/td\u003e\r\n\t\u003c\/tr\u003e\r\n\u003c\/table\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp class=\"attention-products\"\u003e\u003cstrong\u003eIMPORTANT:\u003c\/strong\u003e\u003cbr\u003e\r\nThe tool life will mostly depend on the proper usage and the hardness of the items \r\ndrilled into. It is normal for a diamond core bit to last up to 10 or more \r\ndrilled holes in hard tiles. Please remember to \u003cstrong\u003ealways\u003c\/strong\u003e use \r\nwater when drilling with diamond core bits.\u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n"}